Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 3 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: TIN; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Non-linear Resistors RUEF500-AP attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
RUEF500-AP Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Shenzhen Socay Electronics
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1812L150/12DR
Littelfuse
1812L150/12DR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, dual-ended terminals, and SMT package style. It is designed for overcurrent protection applications with a max operating temperature of 85°C and min of -40°C. This rectangular package thermistor has a compact size of 4.73mm x 3.41mm x 1.25mm for surface mounting method.
NANOSMDC016F-2
TE Connectivity
TE Connectivity's NANOSMDC016F-2 is a PTC thermistor with 5 ohm resistance and 0.5 W power dissipation. It features dual-ended terminals, rated for 10 V AC voltage, ideal for overload protection applications. This surface-mount device has a rectangular package and operates up to 85°C temperature.
RUEF400-1
TE Connectivity's RUEF400-1 is a PTC resettable fuse with resistance of 0.05 ohm and rated AC voltage of 30V. Ideal for temperature sensing applications, it features radial terminal placement in a rectangular package. With dimensions of 14mm x 3mm x 19.3mm, it operates b/w -40°C to 85°C and has a power dissipation of 2.5W.
B72650M0131K072
B72650M0131K072 by TDK is a non-linear resistor with a max energy absorbing capacity of 4.2 J. It is a metal oxide film varistor that can operate at temperatures ranging from -40 to 85 °C. This surface mount varistor has a max circuit RMS voltage of 130 V and is commonly used for surge protection in electronic devices.
B57237-S109-M
B57237-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2700 K and can operate b/w -55°C to 170°C. This radial terminal thermistor is ideal for soft start applications due to its high power dissipation of 3.1W in disk package.
V250LA20AP
V250LA20AP by Littelfuse is a VARISTOR with 250V URac and 330V operating voltage. It has a max energy absorption of 72J, ideal for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
MICROSMD050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Operating Voltage: 13.2 V;
LVR075S-240
TE Connectivity's LVR075S-240 is a PTC resettable fuse with resistance of 0.316 ohm and max circuit voltage of 240V. Ideal for temperature sensing applications, it operates b/w -40 to 85°C. Featuring radial terminal placement, it is CSA, TUV, and UL certified.
MF-NSMF050-2
Bourns
The Bourns MF-NSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 13.2V, and max temp of 85°C. It features dual-ended terminals in a rectangular SMT package suitable for automotive applications meeting AEC-Q200 standards.
TRF250-180U
TE Connectivity's TRF250-180U is a PTC resettable fuse with 100V URac and 1.5W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape for through-hole mounting at up to 85°C.
B57153S0479M051
B57153S0479M051 by TDK is a 4.7 ohm NTC thermistor with 20% tolerance and 1.4 W power dissipation. It features a radial disk package, 25mm lead length, and -55 to 170°C operating temperature range. Primarily used for overload protection due to its thermal sensitivity index of 2800 K.
55015
Measurement Specialties
NTC THERMISTOR; No. of Terminals: 2;
2920L150
2920L150 by Littelfuse is a PTC thermistor with 0.08 ohm resistance and 33V operating voltage. It offers overcurrent protection, dual-ended terminals, SMT package style, and matte tin finish. Ideal for applications requiring surface mounting type in a temperature range of -40 to 85°C.
V20P25P
V20P25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temperature of 125°C and radial terminal placement, it offers reliable protection against voltage spikes up to 31V RMS and DC. CUL, TUV, UL certified for quality assurance.
NCU18XH103F60RB
Murata Manufacturing
Murata Manufacturing's NCU18XH103F60RB is a 10000 ohm NTC thermistor with 1% tolerance. It operates at -40 to 125 °C, suitable for temperature sensing applications. With dual-ended terminals and SMT package style, it offers high thermal sensitivity index of 3380 K.
RXEF050-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 72 V; Terminal Placement: RADIAL; Additional Features: 0.5-0.77 OHMS AT 20 DEG CEL;
B72220S3271K101
B72220S3271K101 by TDK is a VARISTOR with 260J energy capacity, 350V operating voltage, and 275V RMS circuit voltage. It has radial terminal placement and metal oxide film technology. Ideal for surge protection in applications requiring high energy absorption and voltage regulation.
MF-RX250
MF-RX250 by Bourns is a PTC resettable fuse with a resistance of 0.05 ohm and an operating voltage of 60V. It is used for overcurrent protection in various applications, featuring radial terminal placement and a disk package shape.
PRG18BB101MB1RB
Murata Manufacturing's PRG18BB101MB1RB is a PTC resettable fuse with 100 ohm resistance, rated for 24V AC. It features dual-ended terminals in a rectangular SMT package, ideal for overcurrent protection applications. With operating temperatures from -20°C to 75°C, it meets CUL and UL standards for reliability.
ERTJ0EV104F
Panasonic
ERTJ0EV104F by Panasonic is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 1%. It is used for temperature compensation, with a rated temperature range of -40 to 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved