Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's NTC0805J1K0 is a 1000 ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, offering high thermal sensitivity index of 2750 K. Ideal for temperature sensing applications due to its dual-ended terminal placement and surface mounting type.
Median Price
$0.549
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$0.210
100+ parts
$0.125
1k+ parts
$0.079
10k+ parts
-
Mouser Electronics
$1.310
$0.736
$0.564
$0.517
RS (Exports)
Verical
$0.067
Farnell
$0.377
$0.348
Element14
$1.660
$1.300
$0.685
Nova Conductors
$0.589
Vyrian
Argo Parts USA
$0.571
Continental Prestige Electronics
$0.577
Netroflash
$0.560
$0.548
Authorized Procurement Solutions
The rated temperature of 55°C ensures that this thermistor can be used in a wide range of temperature sensing applications.
The specific application of temperature sensing indicates that this product is designed and optimized for accurate temperature measurement.
Dual ended terminal placement provides flexibility in installation and connection, allowing for easier integration into various electronic systems.
The rectangular package shape makes it easier to mount and fit the thermistor in different devices or circuit boards.
The TR packing method ensures that the thermistors are securely packed and protected during transportation and storage, reducing the risk of damage.
The specific resistance value of 1000 ohms indicates the precision and accuracy of this thermistor in temperature sensing applications.
Having two terminals simplifies the installation process and provides a secure connection, enhancing the overall reliability of the product.
The wraparound terminal shape ensures better contact and stability, minimizing the risk of connectivity issues during operation.
The compact size of the thermistor makes it suitable for applications where space is limited, without compromising on performance.
The high maximum operating temperature of 125°C indicates the durability and reliability of this thermistor in various environments.
The high thermal sensitivity index of 2750 K ensures quick and accurate temperature response, making this thermistor ideal for sensitive temperature measurements.
The low minimum operating temperature of -55°C indicates the versatility of this thermistor in both cold and hot temperature conditions.
The low package height of 0.5 mm allows for a slim and compact design, making it easier to integrate the thermistor into small devices or electronic systems.
Being an NTC thermistor type, this product offers a negative temperature coefficient, providing a more linear response for accurate temperature sensing.
With a tolerance of 5%, this thermistor offers consistent and reliable temperature measurement results within a specified range.
The specific length of the package makes it easier to handle and install the thermistor in various electronic devices or circuits.
The surface mounting type allows for easy and secure attachment to PCBs, reducing the assembly time and effort required for installation.
With a rated power dissipation of 0.125 W, this thermistor can reliably handle power loads while maintaining accurate temperature sensing capabilities.
The specific width of the package ensures compatibility with standard mounting setups and provides stability during integration into electronic systems.
Non-linear Resistors NTC0805J1K0 attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Width (Package):
Packing Method:
Dimensions:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Size Code:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
NTC0805J1K0 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
NXP Semiconductors
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
MINISMDC150F/24-2
TE Connectivity
TE Connectivity's MINISMDC150F/24-2 is a PTC resettable fuse with resistance of 0.12 ohm and rated AC voltage of 24 V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.94mm, it operates b/w -40 to 85 °C and conforms to UL, CSA, TUV standards.
CG0603MLA-5.5ME
Bourns
Bourns CG0603MLA-5.5ME is a varistor with 5.5V operating voltage, 0.1J energy capacity, and 4V RMS voltage. It's a surface mount device with dual-ended terminals, metal oxide film technology, and nickel barrier finish. Ideal for surge protection in electronics due to its compact rectangular package design.
MF-SM075-2-99
The Bourns MF-SM075-2-99 is a PTC resettable fuse with 1 ohm resistance and 30V operating voltage. It is used for overload protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and meets CSA, TUV, and UL standards.
RF1351-000
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: MINIMUM RESISTANCE IS 2.10 OHMS; Rated AC Voltage (URac): 30 V; Package Style (Meter): SMT;
V5.5MLA0805LNH
V5.5MLA0805LNH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is ideal for surge protection in SMT applications at temperatures ranging from -40 to 125°C.
GA10K3A1AM
TE Connectivity's GA10K3A1AM is a non-linear resistor with 10000 ohm resistance, suitable for temperature sensing applications. With a rated temperature of 25°C to 90°C, it features radial terminal placement and chassis mount package style. Its thermal sensitivity index is 3976 K, making it ideal for precise temperature measurements in various electronic devices.
V275LA20A
Harris Semiconductor
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 369 V; Technology: METAL OXIDE FILM;
RXEF050S-AP
TE Connectivity's RXEF050S-AP is a PTC resettable fuse with 1.17 ohm resistance and rated power dissipation of 0.77 W. Ideal for temperature sensing applications, it features radial terminal placement in a disk package, suitable for through-hole mounting at up to 85°C operating temperature.
B57541G1103F005
TDK
B57541G1103F005 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and rated power dissipation of 0.018 W. It is used for temperature sensing applications with a thermal sensitivity index of 3625 K, operating b/w -55 to 250 °C. The thermistor has radial terminal placement in disk package shape for chassis mounting.
MINISMDC050F-2
MINISMDC050F-2 by TE Connectivity is a PTC thermistor with 1 ohm resistance, operating voltage of 24V, and dual terminal placement. It is used for overload protection in various applications due to its compact rectangular package design and surface mounting type. Operating temperature ranges from -40°C to 85°C making it suitable for UL, CSA, TUV reference standards.
B72220S1300K102
TDK's B72220S1300K102 is a VARISTOR with 30V RMS and 34V DC max circuit voltage. It has METAL OXIDE FILM tech, 26J energy absorption, and -40 to 85°C operating range. Ideal for surge protection in electronics due to its high energy capacity and radial terminal placement.
ERTJ1VS104FA
Panasonic
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
B72210S0171K101
B72210S0171K101 by TDK is a VARISTOR with 175V RMS and 225V DC max circuit voltage. It has a 28J energy capacity, -40 to 105°C operating temp range, and radial package style. Ideal for surge protection in various applications like power supplies and industrial equipment.
TRF250-145
TE Connectivity's TRF250-145 is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6.5mm x 4.6mm x 11mm. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
103AT-2
Semitec
Semitec's 103AT-2 NTC Thermistor has a resistance of 10k ohm with ±1% tolerance. It operates b/w -50°C to 110°C, ideal for temperature compensation applications. With radial terminal placement and disk package shape, it offers high thermal sensitivity index of 3435 K.
V20E25P
V20E25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temp of 85°C and -40°C min, it offers protection against voltage spikes up to 31V RMS and DC. Its radial package style makes it ideal for through-hole mounting.
1812L150/12DR
1812L150/12DR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, dual-ended terminals, and SMT package style. It is designed for overcurrent protection applications with a max operating temperature of 85°C and min of -40°C. This rectangular package thermistor has a compact size of 4.73mm x 3.41mm x 1.25mm for surface mounting method.
B57164-K103-J
TDK's B57164-K103-J NTC Thermistor has a resistance of 10000 ohm with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature compensation applications. With a rated power dissipation of 0.45W and thermal sensitivity index of 4300K, it is suitable for through hole mounting in various electronic devices.
V430CH8
General Electric Solid State
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Length (Package): 8 mm; Package Style (Meter): SMT; Maximum Energy Absorbing Capacity: 23 J;
192-102DEW-A01
Honeywell Sensing And Control
192-102DEW-A01 by Honeywell is a NTC thermistor with 1000 ohm resistance, ideal for temperature sensing applications. Featuring a disk package shape and wire terminals, it operates b/w 0 to 70°C with a thermal sensitivity index of 3260 K. Suitable for through hole mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTC0805J47K
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Tyco Electronics Components
NTC0805J10K
TE Connectivity's NTC0805J10K is a 10000 ohm NTC thermistor with -55 to 125 °C operating range and 5% tolerance. It has dual-ended terminals, measures 2mm x 1.25 x 0.5mm, and is used for temperature sensing applications in surface mount configurations.
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J5K0
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J100K
TE Connectivity's NTC0805J100K is a 100k ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature sensing applications. With a thermal sensitivity index of 4100 K, this surface mount thermistor offers accurate and reliable performance in compact devices.
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J220R
TE Connectivity's NTC0805J220R is a 220 ohm NTC thermistor with 5% tolerance and 0.125 W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. Ideal for surface mounting, it measures 2mm x 1.25mm x 0.5mm.
NTC0805J6K8
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 6800 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J470R
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 5 %; No. of Terminals: 2;
NTC0805J3K3
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3300 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J20K
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J150R
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 5 %; Terminal Shape: WRAPAROUND;
NTC0805J1K0
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J150K
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J220
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 220 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTC0805J50K
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved