Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B57164K0102J000 by TDK is a NTC thermistor with 1000 ohm resistance, 5% tolerance, and 3730 K thermal sensitivity index. It is used for temperature compensation applications, featuring radial terminal placement and matte tin finish. Operating temperatures range from -55 to 125 °C.
Median Price
$0.628
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.570
100+ parts
$0.455
1k+ parts
$0.393
10k+ parts
$0.360
Newark
$0.686
$0.534
$0.486
$0.474
DigiKey
$0.690
$0.422
$0.387
Element14
$0.959
$0.527
$0.354
Bürklin Elektronik
$1.250
$0.680
$0.590
-
Arrow
$0.152
Verical
$0.151
$0.148
Farnell
$0.343
$0.297
$0.295
Chip1Stop
$0.383
RS (Exports)
$0.782
$0.633
TME
$0.330
$0.293
$0.287
Vyrian
Micros
$0.224
Partservice
Micros sp.j. W. Kędra i J. Lic
$0.240
VNN
Nova Conductors
Corohmni
$0.124
Aztec Data Supply Inc.
Semicontronic
$0.257
$0.251
$0.249
Advanced Electronics
$0.366
$0.347
Continental Prestige Electronics
$0.537
$0.448
$0.305
Assy Fe
Glotronic Ltd.
Robosynatics
Lucentia Tech
$0.037
$0.034
Argo Parts USA
Perfect Parts
Bastille Electronics
Ideal for applications where a consistent temperature of 25°C is required
Suitable for temperature compensation applications where precise adjustments are needed
Provides a specific resistance value for accurate temperature sensing
Can withstand high operating temperatures up to 125°C
High sensitivity to changes in temperature for accurate readings
Easy to mount and install in various applications
Secure mounting method for stability in different environments
Able to dissipate power efficiently without overheating
Non-linear Resistors B57164K0102J000 attributes and parameters. Explore more Non-linear Resistors devices from TDK
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
B57164K0102J000 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
B72660M0271K072
TDK
B72660M0271K072 by TDK is a METAL OXIDE FILM VARISTOR with 21J energy capacity, 275V RMS voltage, and 350V operating voltage. It is a non-linear resistor in DO-214var package for surge protection applications. With DUAL terminals and J BEND shape, it operates b/w -40 to 85°C for surface mounting.
B72214P2301K101
B72214P2301K101 by TDK is a VARISTOR with 140J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in electronic circuits due to its METAL OXIDE technology and DUAL ENDED terminal placement in a DISK PACKAGE.
RXEF250-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel;
NTC0805J470R
TE Connectivity
TE Connectivity's NTC0805J470R is a 470 ohm NTC thermistor with 5% tolerance and 0.125 W power dissipation. It features dual-ended terminals in a rectangular package (2mm x 1.25mm x 0.5mm) for temperature sensing applications, suitable for surface mounting method.
MF-SM100-2
The Bourns MF-SM100-2 is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type. The rectangular package measures 7.98mm x 5.44mm x 3mm, suitable for various electronic devices meeting AEC-Q200, CUL, TUV, and UL standards.
SG200
Api Technologies
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; Thermal Sensitivity Index: 3000 K; Shape (Package): DISK PACKAGE;
ERTJ0ER333J
Panasonic
Panasonic ERTJ0ER333J is a NTC thermistor with 33000 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4300 K, operating b/w -40 to 125 °C. The dual-ended SMT package with wraparound terminals makes it suitable for surface mount installations.
NTCS0603E3103FLT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103FLT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3435 K thermal sensitivity index. Ideal for temperature sensing applications, it operates b/w -40 to 150 °C and features dual-ended terminals in a compact SMT package.
V3.5MLA0805LNH
V3.5MLA0805LNH by Littelfuse is a VARISTOR with 3.5 V operating voltage and 0.1 J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is used in applications requiring surge protection against voltage spikes in electronic circuits.
B57703-M103-G40
B57703-M103-G40 by TDK is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 3988 K thermal sensitivity index. It is used for temperature sensing applications with a rated temperature range of -55 to 125 °C. The thermistor has a chassis mount design with radial terminal placement and flexible wire terminals.
RUEF400
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 30 V;
1812L200/12DR
1812L200/12DR by Littelfuse is a PTC resettable fuse with a resistance of 0.02 ohm. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals and operates within a temperature range of -40 to 85 °C.
2920L185DR
2920L185DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
1206L035/16YR
Littelfuse 1206L035/16YR is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 16V, and max temp of 85°C. It is used for overcurrent protection in surface mount applications with dual-ended terminals and rectangular package shape.
RF1353-000
TE Connectivity's RF1353-000 is a PTC resettable fuse with resistance of 0.25 ohm and operating voltage of 13.2V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
MINISMDC010F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Height (Package): .89 mm;
B72540T6500K062
B72540T6500K062 by TDK is a VARISTOR with a max operating temperature of 150°C and a rated power dissipation of 0.02W. It is commonly used in non-linear resistor applications to protect circuits from excessive voltage spikes.
Measurement Specialties
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; No. of Terminals: 2; Terminal Shape: WIRE;
RXEF020-AP
TE Connectivity's RXEF020-AP is a PTC resettable fuse with 1.83 ohm resistance and rated AC voltage of 72V. It is used for temperature sensing applications, featuring radial terminal placement in a disk package. With a max operating temperature of 85°C and min of -40°C, it offers 0.41W power dissipation through through-hole mounting.
B57364-S109-M
B57364-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2800K and can operate b/w -55°C to 170°C. Ideal for soft start applications due to its radial terminal placement in disk package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B57164-K103-J
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2;
TDK's B57164-K103-J NTC Thermistor has a resistance of 10000 ohm with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature compensation applications. With a rated power dissipation of 0.45W and thermal sensitivity index of 4300K, it is suitable for through hole mounting in various electronic devices.
B57164K0101J000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
B57153S0100M000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1.4 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57153S0479M051
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4.7 ohm; Rated Power Dissipation (P): 1.4 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57153S0479M000
B57164-K472-J
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4700 ohm; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; Minimum Operating Temperature: -55 Cel;
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
B57153-S100-M
B57153S0100M051
B57153S0100M051 by TDK is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 1.4 W power dissipation. It is used for overload protection in applications requiring a thermal sensitivity index of 2800 K and operating temperatures ranging from -55 to 170 °C. The thermistor features radial terminal placement, wire-shaped terminals, and a disk package with dimensions of 8.5mm x 6mm x 13mm.
B57153S0330M000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 33 ohm; Rated Power Dissipation (P): 1.4 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57153S0100M054
B57153S0150M000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 15 ohm; Rated Power Dissipation (P): 1.4 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57153S0150M051
B57153-S150-M
B57164K0331J000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 330 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
B57164K0472J000
B57164K0221J000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 220 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
B57164K0102J055
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
B57164K0102J051
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved