Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT04-3P-LE08 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for panel mounting applications, it features a UL Flammability Code of 94V-0 and a rated current of 13A.
Median Price
$8.911
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$7.850
100+ parts
$6.450
1k+ parts
$4.970
10k+ parts
-
TTI
$8.110
$7.760
$7.590
DigiKey
$9.820
$7.090
$6.027
Conrad
$14.075
Master Electronics
$8.090
$6.650
$6.620
Verical
$9.712
VNN
$6.300
Digiode
$8.379
Vyrian
LJR Electronics
Electro Sonic
$6.200
Extreme Components
IBS Electronics
$11.346
$9.327
$9.285
Nova Conductors
EMSNET
A2Z Electronics, Inc.
Semicontronic
$5.350
$5.216
$5.190
Corphita
$7.938
Robosynatics
Lucentia Tech
$5.939
$5.818
Argo Parts USA
Continental Prestige Electronics
Aranea Global
EMSNET (Excess)
Resion (Excess)
The compact size of the body allows for easy installation in limited spaces, making it a versatile choice for various applications.
The high voltage rating ensures reliable performance and safe operation in different electrical systems.
The use of glass-filled polyamide as the insulator material provides excellent electrical insulation and durability, making the connector suitable for long-term use.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising performance.
The wide range of operating temperatures allows for reliable performance in extreme cold conditions as well.
This specific connector type is designed for effective power and signal transmission, making it a practical choice for various connectivity needs.
The UL 94V-0 flammability rating indicates that this connector meets strict safety standards, providing peace of mind during operation.
The high rated current ensures efficient signal transmission, making this connector suitable for applications requiring reliable electrical connections.
Having only one connector simplifies installation and maintenance, reducing the likelihood of errors during setup.
The specific terminal pitch measurement ensures compatibility with a wide range of terminals, offering flexibility in connection options.
Combination Line Connectors DT04-3P-LE08 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT04-3P-LE08 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Color Change 21/DEC/2023 Material Change 18/JAN/2023
PCN Assembly/Origin - Molding process chg 30/AUG/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
33472-4806
Molex
Molex 33472-4806 is a Combination Line Connector with 8 contacts in 2 rows. Made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE, it operates b/w -40°C to 125°C. Ideal for cable mounting, crimp termination, and female contact applications.
1-776087-1
TE Connectivity 1-776087-1 is a Combination Line Connector with dimensions 2.394" x 1.498" x 1.492". It has 23 contacts, rated at 17A, suitable for board mounting applications at temperatures ranging from -40°C to 125°C. The connector features POLYBUTYLENE TEREPHTHALATE insulator material and UL94V-0 flammability code, making it ideal for various electronic systems requiring a polarized, right-angle male terminal connection.
DTP04-4P-E003
TE Connectivity's DTP04-4P-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V, 25A signal current, and operating temperatures from -55 to 125°C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
12015799
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Mixed Contacts: NO; Filter Feature: NO;
34797-0202
Molex 34797-0202 is a Combination Line Connector with 0.598" x 0.555" x 1.417" dimensions, made of POLYBUTYLENE TEREPHTHALATE. It has 2 contacts, male gender, blade pin-skt style, and is used for cable mounting with crimp termination.
DT06-4S-CE13
TE Connectivity's DT06-4S-CE13 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief option.
1379674-1
TE Connectivity's 1379674-1 is a Combination Line Connector with dimensions of 0.551" x 1.315" x 0.463". Rated for 14V, it has UL certification and operates b/w -40 to 100°C. Ideal for cable mounting applications, this connector features a total of 4 contacts with a rated current of 7.5A.
DTF13-6P-G003
TE Connectivity's DTF13-6P-G003 is a 6-contact combination line connector with a rated voltage of 250V and current of 13A. With insulator material made of plastic, it operates b/w -55°C to 125°C, suitable for board mounting applications requiring a right-angle male contact design.
5-2232263-3
TE Connectivity 5-2232263-3 is a Combination Line Connector with dimensions 1.083" x 0.687" x 0.589". Rated for 600V, it operates b/w -55°C to 140°C. Ideal for panel mounting applications, it features UL and VDE standards compliance.
1-1456426-5
TE Connectivity 1-1456426-5 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, operates b/w -40 to 150°C, and supports 115/230VAC mains connector rating. Ideal for cable mounting applications due to its compact dimensions of 0.972" x 1.043" x 0.689".
1-1564416-1
TE Connectivity 1-1564416-1 is a Combination Line Connector with dimensions 1.673" x 1.852" x 1.567". It has a rated voltage of 60V, UL flammability code of 94V-0, and can handle up to 20A current. Ideal for applications requiring male connectors with polarized polarization key and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material.
350782-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; DIN Conformance: NO; Manufacturer Series: 350782;
12015792
Aptiv's 12015792 Combination Line Connector features dimensions of 0.846" x 0.886" x 1.606", with NYLON insulator and operating temp range of -40 to 125°C. It has a total of 2 contacts, female contact gender, and crimp termination type. Ideal for commercial applications requiring reliable cable mounting with locking and detent options.
DT06-2S-EP11
TE Connectivity's DT06-2S-EP11 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, signal current of 13A, and female contact gender. Ideal for cable mounting applications requiring crimp termination with strain relief.
12015797
Aptiv's 12015797 is a COMBINATION LINE CONNECTOR with 4 FEMALE RND PIN-SKT contacts. It has a body length of 1.389" and depth of 1.594", ideal for automotive wiring applications requiring reliable connections in limited space.
9-1452380-9
TE Connectivity's 9-1452380-9 is a Combination Line Connector with dimensions 3.067" x 1.654" x 1.406". Rated for 14V, it has GLASS FILLED POLYAMIDE insulator and supports up to 30A signal current. Ideal for applications requiring a polarized connector with 96 contacts and operating temperatures from -40°C to 130°C.
DT04-2P-L012
TE Connectivity's DT04-2P-L012 is a 1.708" x 1.595" x 1.25" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125°C operation at 250V and 13A signal current. It features UL-rated polarization, panel mounting, and strain relief, making it ideal for applications requiring a polarized male receptacle with two contacts.
282106-1
TE Connectivity's 282106-1 is a Combination Line Connector with dimensions of 1.252" x 0.543" x 1.654". Rated for 24V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40°C to 125°C. With a rated current of 14A, it features a polarized design and is ideal for cable mounting applications.
DRC13-24PA
TE Connectivity's DRC13-24PA is a 24-contact combination line connector with dimensions of 1.43" x 2.93" x 1.43". Rated for 250V and 13A, it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring a polarized male receptacle with solder termination.
AT06-6S-BLK
Amphenol
The Amphenol AT06-6S-BLK is a combination line connector with 6 contacts, rated at 13A. It features a body size of 0.98" x 0.717" x 1.237", made of polyethylene for durability. Ideal for applications requiring a female SQ PIN-SKT contact style, with operating temperatures ranging from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
DT04-2P-E005
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
DT04-2P-C015
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-CE03
TE Connectivity's DT04-2P-CE03 is a 1.818" x 0.675" x 0.67" Combination Line Connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male receptacle connector with strain relief option.
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
DT04-6P
The TE Connectivity DT04-6P is a combination line connector with 6 contacts, rated for 13A signal current and 250V voltage. Featuring nickel termination finish, glass-filled polyamide insulator, and UL94V-0 flammability code, it operates in temperatures from -55 to 125°C. Ideal for commercial applications requiring durable connectors with polarization key and strain relief mounting option.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
DT04-4P-L012
TE Connectivity's DT04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a male contact style, crimp termination type, and panel mounting option with strain relief.
DT04-6P-CL09
TE Connectivity's DT04-6P-CL09 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a 13A signal current, this UL-rated connector features crimp termination and polarization key for secure connections.
DT04-3P
TE Connectivity's DT04-3P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C. Ideal for applications requiring a polarized, male contact style connector with crimp termination and strain relief mounting option.
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: DT;
DT04-2P-RT01
TE Connectivity's DT04-2P-RT01 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a single receptacle connector with strain relief option.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
DT04-4P-E008
TE Connectivity's DT04-4P-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief.
DT04-4P-C015
TE Connectivity's DT04-4P-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-6P-CE02
TE Connectivity's DT04-6P-CE02 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a polarized, crimp termination male connector with strain relief mounting option.
DT04-12PA-P021
TE Connectivity's DT04-12PA-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A, suitable for applications requiring a temperature range of -55 to 125°C. The connector features UL94V-0 flammability code and polarization key for secure mating.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved