Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DMC-M12-20BN is a Rack & Panel Connector with 12 contacts, suitable for cables with 24-20 AWG wire sizes. It has a temperature range of -55 to 175°C and features crimp termination for female contacts. Ideal for applications requiring reliable electrical connections in harsh environments.
Median Price
$42.104
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
$39.628
10k+ parts
VNN
$11.360
Nova Conductors
$11.829
Digiode
$17.062
Electro Enterprises
$19.327
$15.866
$14.562
$15.632
Vyrian
FDH Electronics
North Shore Components
Aztec Data Supply Inc.
$2.207
Continental Prestige Electronics
$11.592
Semicontronic
$15.270
$14.888
$14.812
Corphita
$16.164
Authorized Procurement Solutions
Glotronic Ltd.
Argo Parts USA
Netroflash
$11.237
$11.001
Ensures reliable performance even in high temperature environments.
Can withstand extremely low temperatures without compromising functionality.
Allows for customization and flexibility in configuration.
Designed specifically for rack and panel applications, ensuring compatibility and reliability.
Provides ample connectivity options for various devices and systems.
Supports smaller wire sizes for versatile use cases.
Easy to install and suitable for cable-based setups.
Accommodates larger wire sizes for robust connections.
Offers a balance of strength and lightweight construction.
Optimal spacing for efficient and secure terminations.
Suitable for a wide range of voltage requirements in various electrical systems.
Provides a secure and reliable method of terminating wires to the connector.
Compatible with male connectors for seamless connections and compatibility.
Rack & Panel Connectors DMC-M12-20BN attributes and parameters. Explore more Rack & Panel Connectors devices from TE Connectivity
Additional Features:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Maximum Wire Size:
Minimum Wire Size:
DMC-M12-20BN Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
International Semiconductor
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Taiwan Semiconductor
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Laube Technology
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Vishay Semiconductors
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1663130-2
RACK AND PANEL CONNECTOR;
1679537
Phoenix Contact
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: CRIMP; UL Flammability Code: 94V-0;
207020-1
TE Connectivity's 207020-1 Rack & Panel Connector features a Mating Contact Pitch of 0.197", Insulation Resistance of 100MΩ, and Rated Voltage of 600V. Ideal for applications requiring durable connectors with a Total No. of Contacts at 36, UL Flammability Code of 94V-0, and Termination Type as CRIMP/SOLDER.
DL5-260PW4A
Itt Cannon
DL5-260PW4A by ITT Cannon is a Rack & Panel Connector with GLASS FILLED POLYETHYLENE insulator. Featuring 260 contacts, it has a PLUG body style and WIRE WRAP termination. Ideal for applications requiring high-density connections in panels.
516-056-000-462
Edac
The Edac 516-056-000-462 is a multiway rack and panel connector with 56 contacts, gold over nickel finish, and hermaphroditic contact gender. It has a body length of 2.592", width of 0.876", and depth of 0.798". Ideal for applications requiring high signal current up to 8.5A in temperature range from -40°C to 105°C.
1855050
RACK AND PANEL CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: VC-D1-BU15-PE;
DMC-M12-20BN
SMS12P-1
SMS12P-1 by Souriau-sunbank is a Rack & Panel Connector with 12 mixed contacts, made of POLYAMIDE. It features UL Flammability Code 94V-2 and is a male plug connector for cable mounting applications.
110536-1011
The ITT Cannon 110536-1011 is a Rack & Panel Connector with 156 contacts, 6 loaded rows, and a mating contact pitch of 0.1". It features an insulation resistance of 5G ohm, operates b/w -55 to 105°C, and has a durability of 10k cycles. Ideal for commercial applications requiring high reliability and signal currents up to 5A.
SMS9PDH1
RACK AND PANEL CONNECTOR; Contact Gender: MALE; Mounting Type: CABLE; Empty Shell: NO; Total No. of Contacts: 9; Filter Feature: NO;
SMS3P-1
Esterline Technologies
RACK AND PANEL CONNECTOR; Contact Gender: MALE; Total No. of Contacts: 3; UL Flammability Code: 94V-2; Mounting Type: CABLE; Contact Material: NOT SPECIFIED;
RE11-442S
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; IEC Conformity: NO; Filter Feature: NO;
DMC-MD82B1101
TE Connectivity's DMC-MD82B1101 Rack & Panel Connector features a body size of 3.39" x 0.6" x 1.055", MIL Conformity, and operating temperatures from -55°C to 175°C. Ideal for applications requiring EN/MIL standards compliance, aluminum alloy shell, crimp termination, and cable/panel mounting with multiple mating parts available.
SMS9RDH1
MULTIWAY RACK AND PANEL CONNECTOR; Contact Gender: FEMALE; Total No. of Contacts: 9; Mounting Type: CABLE; MIL Conformity: NO; IEC Conformity: NO;
008027030000023
Kyocera
MULTIWAY RACK AND PANEL CONNECTOR;
ZPF000000000015268
TE Connectivity's ZPF000000000015268 is a Rack & Panel Connector with 12 contacts, rated at 7.5A for signal current. It operates b/w -55 to 175°C, suitable for cable mounting applications. The connector features a composite shell material and uses crimp termination method.
ZPF000000000203492
TE Connectivity's ZPF000000000203492 is a Rack & Panel Connector with 11 contacts, rated at 13A. It operates in temperatures from -55 to 175°C, suitable for various applications requiring a female crimp termination and accommodating wire sizes from 20 to 16 AWG.
1679524
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; IEC Conformity: NO; MIL Conformity: NO;
SIMM0816PN
Amphenol
Amphenol's SIMM0816PN is a Rack & Panel Connector with 8 contacts, male gender, and crimp termination. It features an empty shell for customization and supports cable and panel mounting. Ideal for industrial applications requiring reliable connectivity in limited space.
5810118011
Cinch Connectivity Solutions
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DMC-MD24N-K-T
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; MIL Conformity: NO; Minimum Operating Temperature: -65 Cel; Contact Material: NOT SPECIFIED;
DMC-MD24A-K-T
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Total No. of Contacts: 1; Minimum Operating Temperature: -65 Cel; Empty Shell: YES;
DMC-MD24B-K-T
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Rows Loaded: 1; Polarization: B; Termination Contact Finish: NOT APPLICABLE;
DMC-MD20N
TE Connectivity's DMC-MD20N is a male rack & panel connector with EMI shielding and gold contact finish. Rated for 125V, it operates b/w -65 to 175°C. Ideal for applications requiring polarization and latching mounting on panels.
DMC-MD24B
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e4; Panel Mount: NO;
DMC-MD24N
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Filter Feature: NO;
Deutsch
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; Insulator Material: POLYETHYLENE; Manufacturer Series: DMC-MD;
DMC-MD20A
TE Connectivity's DMC-MD20A is a Rack & Panel Connector with EMI shielding, gold termination finish, and polyethylene insulator. Rated for 125V, it operates b/w -65 to 175°C. Ideal for applications requiring polarization, such as in EN and MIL standards compliant setups.
DMC-MD20D
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Maximum Operating Temperature (Cel): 175; Mains Connector Rating: 115/230VAC;
DMC-MD26N-K-S-T
TE Connectivity's DMC-MD26N-K-S-T is a Rack & Panel Connector with EMI shielding, rated for 125V and -65 to 175°C operating temperatures. It features a nickel finish, composite shell material, and crimp termination. Ideal for applications requiring secure panel mounting in industrial environments.
DMC-M20-22PN
TE Connectivity's DMC-M20-22PN is a Rack & Panel Connector with 20 contacts, rated at 5A signal current. It operates b/w -55°C to 175°C, accommodating wire sizes from 26 AWG to 22 AWG. Ideal for cable mounting applications requiring male crimp termination in composite shell material.
DMC-MD8901
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Mixed Contacts: NO; Reference Standard: EN, MIL; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
DMC-M08-16PN
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Termination Type: CRIMP;
DMC-M12-20SNE
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 3.38; Panel Mount: NO;
DMC-MD26N-K-T
TE Connectivity's DMC-MD26N-K-T is a Rack & Panel Connector with EMI shielding, rated for 125V and -65 to 175°C operating temperatures. It features a composite shell, crimp termination, and latching mounting option. Ideal for applications requiring reliable electrical connections in harsh environments.
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Empty Shell: YES; Mating Info.: MULTIPLE MATING PARTS AVILABLE; Termination Type: CRIMP; MIL Conformity: YES;
DMC-MD82B3101
TE Connectivity's DMC-MD82B3101 is a 3.39" long, 0.6" wide, and 1.055" deep rack & panel connector with EMI shielding. It has a rated voltage of 125V and can operate in temperatures ranging from -65 to 175°C. This polarized connector with an aluminum alloy shell is suitable for various applications requiring crimp termination and multiple mating parts availability.
DMC-MD82B5201
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Mixed Contacts: NO; Body or Shell Style: RECEPTACLE; Body Length: 3.39 inch; Termination Type: CRIMP;
DMC-MD8001
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; IEC Conformity: NO; Body Depth: 1.106 inch;
DMC-MD82B2201
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Shell Material: ALUMINUM ALLOY; Filter Feature: NO; Empty Shell: YES; Mating Info.: MULTIPLE MATING PARTS AVILABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved