Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DMC-MD24N is an EMI shielded rack & panel connector with a rated voltage of 125V and operating temperatures from -65 to 175°C. It features a polarized female connector with latching mounting, suitable for applications requiring reliable power connections in harsh environments.
Median Price
$33.470
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
TTI Europe
1+ parts
$25.205
100+ parts
-
1k+ parts
10k+ parts
Arrow
$32.146
$25.198
$23.807
TE Connectivity
Mouser Electronics
$37.480
$27.790
$27.670
DigiKey
$43.170
$31.195
$29.245
Verical
Electro Enterprises
$15.891
$13.045
$11.973
$12.853
Nova Conductors
$18.359
Digiode
$23.945
FDH Electronics
Vyrian
Bisco
Electro Mavin
TME
IBS Electronics
$43.329
$41.595
Aztec Data Supply Inc.
$1.211
Continental Prestige Electronics
$17.992
Bastille Electronics
$18.360
$17.442
$16.340
Semicontronic
$21.420
$20.884
$20.777
Corphita
$22.684
Argo Parts USA
Helps to minimize electromagnetic interference, ensuring reliable and high-quality connection.
Suitable for applications requiring a voltage rating of up to 125V.
Can operate efficiently at high temperatures up to 175°C, making it suitable for demanding environments.
Capable of functioning in extremely cold temperatures down to -65°C, providing versatility in various conditions.
Specifically designed for rack and panel applications, ensuring compatibility and secure connections in such setups.
Offers polarization key for proper alignment and connection, reducing the risk of incorrect mating and potential damage.
Single connector setup simplifies installation and maintenance, making it easier to handle.
Designed for panel mounting, providing a secure and stable fit for the connector in the designated location.
Composite material offers a good balance of strength and weight, ensuring durability and ease of handling.
Meets mains connector rating standards for safe and reliable operation in electrical applications.
Female connectors are commonly used for connecting to male counterparts, allowing for standard connection setups.
Receptacle style provides a secure and protected connection point for the mating connector, reducing the risk of damage.
Latching mounting option ensures a secure and locking connection, preventing accidental disconnection during operation.
Rack & Panel Connectors DMC-MD24N attributes and parameters. Explore more Rack & Panel Connectors devices from TE Connectivity
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization:
Polarization Key:
Rated Voltage:
Shell Material:
Total No. of Contacts:
DMC-MD24N Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Taitron Components
5810160006
Cinch Connectivity Solutions
5810160006 by Cinch Connectivity Solutions is a Rack & Panel Connector with 60 contacts. It features TIN OVER NICKEL finish, GLASS FILLED POLYMER insulator, and BRASS contact material. Ideal for board mounting applications requiring reliable male connectors with solder termination.
0612016
Phoenix Contact
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Insulator Material: POLYAMIDE; Contact Material: NOT SPECIFIED;
DL5-260P
Itt Cannon
ITT Cannon's DL5-260P is a 260-contact rack & panel connector with 0.1" pitch, suitable for commercial applications. Featuring 1200VAC dielectric voltage, it has a temperature range of -55 to 105°C and offers durability up to 10,000 cycles. With crimp termination and male contact gender, it supports wire sizes from 42 to 18 AWG.
00175540102
Amphenol
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Mounting Type: CABLE AND PANEL; IEC Conformity: NO; Insulator Material: POLYETHYLENE; Total No. of Contacts: 8;
207439-1
Tyco Electronics Amp
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
207440-1
TE Connectivity's 207440-1 Rack & Panel Connector features a Mating Contact Pitch of 0.197", Insulation Resistance of 100MΩ, and Rated Voltage of 600V. Ideal for applications requiring durable connectors with a temperature range from -55 to 130°C.
DMC-MD8001
TE Connectivity's DMC-MD8001 Rack & Panel Connector features EMI shielding, rated voltage of 125V, and operating temperatures from -65 to 175°C. With aluminum alloy shell and crimp termination, it is ideal for applications requiring polarization keying in EN/MIL standards.
1884801
RACK AND PANEL CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
00175510102
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Mixed Contacts: NO; Filter Feature: NO; DIN Conformance: NO; MIL Conformity: NO;
207444-8
TE Connectivity's 207444-8 is a Rack & Panel Connector with 0.197" Mating Contact Pitch, 100M ohm Insulation Resistance, and 600V Rated Voltage. Ideal for board mounting applications in commercial settings due to its durable design and high reliability.
207530-8
TE Connectivity's 207530-8 Rack & Panel Connector features a Mating Contact Pitch of 0.197", Insulation Resistance of 100MΩ, and Rated Voltage of 600V. Ideal for board mounting with durability of 250 cycles, it is used in commercial applications requiring a reliable female connector with solder termination.
P-302H-CCT-L
P-302H-CCT-L by Cinch Connectivity Solutions is a Rack & Panel Connector with Matte Tin finish, Phenolic insulator, and Brass contacts. It has 2 contacts, male gender, and UL 94V-1 flammability rating. Ideal for cable mounting applications, mating with S-302-CCT-K connector for solder termination in plug body style.
8910
AMPHENOL ICC
RACK AND PANEL CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; Manufacturer Series: 8910; MIL Conformity: NO;
SMS3P-1
Souriau-sunbank Connection Technologies
SMS3P-1 by Souriau-sunbank is a Rack & Panel Connector with 3 mixed contacts. Made of Polyamide, it has UL Flammability Code 94V-2. Ideal for cable mounting, this male plug connector is suitable for various industrial applications.
SGMC34M0E0000
Positronic Industries
RACK AND PANEL CONNECTOR;
SIME2022PNP
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; IEC Conformity: NO;
SMS9P-1
Souriau
RACK AND PANEL CONNECTOR; Contact Gender: MALE; Empty Shell: NO; UL Flammability Code: 94V-2; Additional Features: TRIM TRIO, POLARIZED; MIL Conformity: NO;
0614153
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Contact Material: NOT SPECIFIED; Manufacturer Series: W80/320-TP/TP;
SIMM0816PN
Amphenol's SIMM0816PN is a Rack & Panel Connector with 8 contacts, male gender, and crimp termination. It features an empty shell for customization and supports cable and panel mounting. Ideal for industrial applications requiring reliable connectivity in limited space.
MTC50-JH2-R22
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DMC-MD24N-K-T
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; MIL Conformity: NO; Minimum Operating Temperature: -65 Cel; Contact Material: NOT SPECIFIED;
DMC-MD24A-K-T
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Total No. of Contacts: 1; Minimum Operating Temperature: -65 Cel; Empty Shell: YES;
DMC-MD24B-K-T
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Rows Loaded: 1; Polarization: B; Termination Contact Finish: NOT APPLICABLE;
DMC-MD20N
TE Connectivity's DMC-MD20N is a male rack & panel connector with EMI shielding and gold contact finish. Rated for 125V, it operates b/w -65 to 175°C. Ideal for applications requiring polarization and latching mounting on panels.
DMC-MD24B
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e4; Panel Mount: NO;
DMC-MD24N
Deutsch
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; Insulator Material: POLYETHYLENE; Manufacturer Series: DMC-MD;
DMC-MD20A
TE Connectivity's DMC-MD20A is a Rack & Panel Connector with EMI shielding, gold termination finish, and polyethylene insulator. Rated for 125V, it operates b/w -65 to 175°C. Ideal for applications requiring polarization, such as in EN and MIL standards compliant setups.
DMC-MD20D
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; IEC Conformity: NO; Maximum Operating Temperature (Cel): 175; Mains Connector Rating: 115/230VAC;
DMC-MD26N-K-S-T
TE Connectivity's DMC-MD26N-K-S-T is a Rack & Panel Connector with EMI shielding, rated for 125V and -65 to 175°C operating temperatures. It features a nickel finish, composite shell material, and crimp termination. Ideal for applications requiring secure panel mounting in industrial environments.
DMC-M20-22PN
TE Connectivity's DMC-M20-22PN is a Rack & Panel Connector with 20 contacts, rated at 5A signal current. It operates b/w -55°C to 175°C, accommodating wire sizes from 26 AWG to 22 AWG. Ideal for cable mounting applications requiring male crimp termination in composite shell material.
DMC-MD8901
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Mixed Contacts: NO; Reference Standard: EN, MIL; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
DMC-M08-16PN
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Termination Type: CRIMP;
DMC-M12-20SNE
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 3.38; Panel Mount: NO;
DMC-MD26N-K-T
TE Connectivity's DMC-MD26N-K-T is a Rack & Panel Connector with EMI shielding, rated for 125V and -65 to 175°C operating temperatures. It features a composite shell, crimp termination, and latching mounting option. Ideal for applications requiring reliable electrical connections in harsh environments.
DMC-MD82B1101
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Empty Shell: YES; Mating Info.: MULTIPLE MATING PARTS AVILABLE; Termination Type: CRIMP; MIL Conformity: YES;
DMC-MD82B3101
TE Connectivity's DMC-MD82B3101 is a 3.39" long, 0.6" wide, and 1.055" deep rack & panel connector with EMI shielding. It has a rated voltage of 125V and can operate in temperatures ranging from -65 to 175°C. This polarized connector with an aluminum alloy shell is suitable for various applications requiring crimp termination and multiple mating parts availability.
DMC-MD82B5201
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Mixed Contacts: NO; Body or Shell Style: RECEPTACLE; Body Length: 3.39 inch; Termination Type: CRIMP;
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; IEC Conformity: NO; Body Depth: 1.106 inch;
DMC-MD82B2201
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Shell Material: ALUMINUM ALLOY; Filter Feature: NO; Empty Shell: YES; Mating Info.: MULTIPLE MATING PARTS AVILABLE;
DMC-MD24A-A1552
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: POLYETHYLENE; Shell Material: COMPOSITE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved