Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .4 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters BMB2A0100BN3 attributes and parameters. Explore more Data Line Filters devices from TE Connectivity
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Rated Current:
Sub-Category:
Width (mm):
BMB2A0100BN3 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1552200253
Molex
WIRE AND CABLE;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
International Semiconductor
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BLM18SG331TN1D
Murata Manufacturing
BLM18SG331TN1D by Murata is a chip bead data line filter with 2 terminals, rated for 1A current. It operates b/w -55°C to 125°C, offering an output impedance of 330 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in a 0603 case is ideal for surface mount applications in various electronic devices.
DSS1NB32A103Q55B
Murata's DSS1NB32A103Q55B is a 100V data line filter with 6A rated current. It operates b/w -40°C to 85°C, measuring L8.5xB3.5xH7.5mm and used for filtering data lines in various electronic applications.
2425-001-X5U0-102AALF
Tusonix
FEED THROUGH CAPACITOR; Mounting Type: PCB MOUNT; Capacitance: 1000 uF; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Minimum Insulation Resistance: 10000 Mohm;
BMB2A0060LN2
TE Connectivity
TE Connectivity's BMB2A0060LN2 is a 0805 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it offers 60 OHM output impedance and operates b/w -55 to 125 °C. Ideal for surface mount applications, this compact filter measures L2XB1.2XH.9 mm and is rated for 0.85 A current, making it suitable for noise suppression in high-frequency circuits up to 100 MHz.
SRF0905-471Y
Bourns
Bourns SRF0905-471Y is a Data Line Filter with 2 functions, rated at 50V. Featuring an inductance of 470uH and max DC resistance of 0.14 ohm, it operates b/w -40°C to 105°C. Ideal for applications requiring a surface mount filter with dimensions L9.2xB6.0xH5.0mm, such as data transmission systems or electronic devices needing noise suppression.
PBY201209T-601Y-N
Yageo
Yageo's PBY201209T-601Y-N is an 0805 chip bead filter with 2 terminals, matte tin finish. It has a width of 1.25mm, length of 2mm, and height of 0.9mm. With a max frequency of 100 MHz and output impedance of 600 ohm, it is ideal for data line filtering applications.
PS1240P02BT
The TDK PS1240P02BT is a Data Line Filter with max operating temp of 70°C and min operating temp of -20°C. It has a diameter of 12.2mm and height of 6.5mm, suitable for through hole mounting applications in various electronic devices.
EMI4192MTTAG
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
MMZ2012Y600BT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Material: Ferrite; Rated Current: 1 A; Terminal Finish: TIN NICKEL COPPER;
BLM15PD300SN1D
Murata's BLM15PD300SN1D is a chip bead data line filter with 2 terminals, rated for 1.4A current and output impedance of 30 ohm. It operates b/w -55 to 125°C, suitable for filtering frequencies from 100 MHz with dimensions of L1.0xB0.5xH0.5 mm in surface mount applications.
BLM31PG601SN1B
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
NFM41CC223R2A3L
NFM41CC223R2A3L by Murata Manufacturing is a data line filter with a rated voltage of 100V and capacitance of 22000uF. It has a min insulation resistance of 10000 Mohm and is commonly used in applications requiring noise suppression in electronic circuits.
BK1608HS220-TV
Taiyo Yuden
BK1608HS220-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 22 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L1.6xB0.8xH0.8 (mm) and surface mounting type.
CM3440Z171R-10
Steward
DATA LINE FILTER; Maximum DC Resistance: .001 ohm; Rated Current: 20 A; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Packing Method: TAPE AND REEL;
PA3747.306NL
Pulse Electronics
PA3747.306NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It has an inductance of 19500 uH, max operating temperature of 125°C, and rated current of 0.75 A. Ideal for applications requiring high output impedance and through hole mounting.
74279277
Wuerth Elektronik & Kg
Wurth Elektronik 74279277 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 70 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in the frequency range of 100-500 MHz.
744212331
Wurth Elektronik 744212331 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 330uH and max DC resistance of 0.3 ohm, it operates b/w -40 to 105 °C. Ideal for surface mount applications, dimensions are L6.5xB3.6xH1.65 mm, suitable for filtering data lines with an output impedance of 2000 OHM.
MPZ2012S300AT
The TDK MPZ2012S300AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.01 ohm and output impedance of 30Ω. Ideal for data line filtering applications due to its compact size (L2.0xB1.25xH0.85 mm) and high rated current of 6A.
EMIF02-USB03F2
STMicroelectronics
EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.
ILHB0603ER600V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 60 OHM; Terminal Finish: Nickel (Ni);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved