Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 927827-2 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 40A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.079 to 0.106 inch.
Median Price
$0.157
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.420
100+ parts
-
1k+ parts
10k+ parts
$0.229
Verical
$0.134
Arrow
DigiKey
$0.227
Master Electronics
$0.135
TTI
$0.141
Chip1Stop
$0.265
Nova Conductors
$0.174
Maritex
$0.217
$0.127
$0.101
TME
$0.320
$0.219
$0.172
NAC Semi
Vyrian
Q Components
Electro Sonic
$0.146
IBS Electronics
$0.190
VNN
EMSNET
Semicontronic
$0.120
$0.117
$0.116
Continental Prestige Electronics
$0.170
Argo Parts USA
$0.168
Aztec Data Supply Inc.
$5.207
Abacus Technologies
Authorized Procurement Solutions
GreenTree Electronics
Glotronic Ltd.
Assy Fe
Kepictronics
EMSNET (Excess)
Netroflash
$0.165
$0.161
Crimped terminals ensure a secure connection, reducing the risk of loose connections or disconnections.
Accommodates a wide range of cable sizes, providing flexibility in cable selection.
Suitable for use in high-temperature environments, ensuring reliable performance under challenging conditions.
Stamped contact design ensures consistent and reliable electrical connections.
Capable of functioning in low-temperature environments, making it versatile for various operating conditions.
Compatible with a specific wire gauge, ensuring a proper fit and connection.
Provides a sufficient contact area for efficient electrical conductivity.
Can accommodate smaller wire sizes, offering compatibility with a wide range of wiring configurations.
Suitable for larger wire sizes, ensuring compatibility with a variety of wiring applications.
Capable of handling high currents, making it suitable for applications requiring increased power capacity.
Accommodates larger cable sizes, providing versatility in cable selection.
Designed to be compatible with male contacts, ensuring proper mating and connectivity.
Assembly Products 927827-2 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - Mult Devs - specification chg 25/FEB/2021 Multiple Drawings Document Clarification 19/Jan/2018
PCN Packaging - Change in Delivery Unit & Minimum Order Quantity 15/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
General Diode
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
MMBT2907ALT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
13711544
Delphi Connection Systems
CONNECTOR ACCESSORY; Minimum Cable Entry: .067 inch; Maximum Cable Entry: .083 inch; Material: COPPER ALLOY; Assembly Item Name: CONTACT; Terminal Type: CRIMP;
1720630311
Molex
Molex 1720630311 CONTACT features CRIMP terminals, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 23A and max operating temperature of 120°C, it is ideal for power applications with wire sizes ranging from 16 to 14 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
WM4P
TE Connectivity
The TE Connectivity WM4P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of PBT material, it's ideal for power and signal connections in various industries.
15305171
Aptiv
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SEAL PLUG;
48099-4000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 67910-0002;
M23053/5-108-0
Alpha Wire
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
1-968849-1
TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.
66504-9
TE Connectivity 66504-9 is a CRIMP terminal with operating temperatures from -55 to 105 °C. It supports wire sizes ranging from 24 to 20 AWG and rated for 2A current. Ideal for SIGNAL applications requiring FEMALE contacts with 0.6 mm2 cross-section area.
WM-2SA
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
39-00-0380
Assembly Items;
AT13-204-2005-SR
Amphenol
CONNECTOR ACCESSORY;
12089040
Aptiv 12089040 CONTACT is a CRIMP terminal made of BRASS for FLRY-B cables. It has 0.055-0.075 inch cable entry, suitable for assembly products. Ideal for automotive wiring applications due to its precise crimping and durable material.
WM-12S-B026
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE;
DF13-2630SCFA(41)
Hirose Electric
FSD77-8-D
Panduit
Panduit's FSD77-8-D ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports 18 AWG wire with a 0.12" cable entry. Ideal for electrical assembly applications.
DZ5CE003
Schneider Electric Sa
DZ5CE003 by Schneider Electric Sa is a plastic ferrule with approvals for NFC and UL. It can handle temperatures from -20 to 105°C, suitable for wire sizes up to 24 AWG. Ideal for electrical assemblies requiring reliable copper connectors in various applications.
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
3003
Keystone Electronics
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Additional Features: LOW PROFILE; MIL Conformity: NO; Terminal Type: SOLDER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
927835-1
CONNECTOR ACCESSORY; Rated Current: 40 A; Contact Gender: FEMALE; Minimum Wire Size: 17 AWG; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel;
927871-1
TE Connectivity's 927871-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 24 to 20 AWG, rated for 20A current. Ideal for applications requiring 0.039-0.063 inch cable entry and operating temperatures b/w -40 to 110 °C.
927871-2
TE Connectivity's 927871-2 is a CRIMP terminal with stamped contact design. It supports wire gauge from 24 to 20 AWG, rated for 20A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.039" to 0.063".
927837-2
TE Connectivity 927837-2 is a CRIMP terminal with stamped contact design. It supports wire gauge from 17 to 13 AWG, rated for 40A current. Ideal for power applications with discrete wire cables, operating b/w -40°C to 130°C temperature range.
927831-2
CONNECTOR ACCESSORY; Rated Current: 40 A; Minimum Wire Size: 20 AWG; Approvals (V): IEC; VDE; DIN Conformity: NO; Maximum Operating Temperature: 130 Cel;
927845-2
TE Connectivity's 927845-2 is a CRIMP terminal with a contact design of STAMPED. It can handle temperatures ranging from -40 to 110 °C and has a rated current of 10 A. This assembly product is commonly used for wire sizes b/w 20 AWG and 17 AWG in female contact applications.
927884-1
927845-1
CONNECTOR ACCESSORY; Rated Current: 10 A; Contact Gender: FEMALE; Cross Section Area: 1 mm2; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -40 Cel;
927844-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 28 A; Minimum Wire Size: 20 AWG; Design: POWER; Maximum Operating Temperature: 105 Cel;
927840-2
CONNECTOR ACCESSORY; Rated Current: 40 A; Maximum Cable Entry: .063 inch; Minimum Cable Entry: .045 inch; Contact Design: STAMPED; Minimum Operating Temperature: -40 Cel;
927872-1
CONNECTOR ACCESSORY; Material: PHOSPHOR BRONZE; Mounting Style: STRAIGHT; Contact Gender: FEMALE; MIL Conformity: NO; Assembly Item Name: CONTACT;
927888-1
927838-2
CONNECTOR ACCESSORY; Rated Current: 40 A; IEC Conformity: NO; Design: POWER; Minimum Cable Entry: .011 inch; Cross Section Area: 2.5 mm2;
927824-1
CONNECTOR ACCESSORY; Rated Current: 40 A; Wire Gauge (AWG): 11; Maximum Cable Entry: .177 inch; Contact Design: STAMPED; Contact Gender: FEMALE;
927827-1
CONNECTOR ACCESSORY; Rated Current: 40 A; Cross Section Area: 1 mm2; Minimum Wire Size: 20 AWG; Maximum Wire Size: 17 AWG; Minimum Operating Temperature: -40 Cel;
927831-4
CONNECTOR ACCESSORY; Rated Current: 40 A; Minimum Wire Size: 20 AWG; Contact Design: STAMPED; Maximum Operating Temperature: 140 Cel; Minimum Operating Temperature: -40 Cel;
927836-1
CONNECTOR ACCESSORY; Rated Current: 40 A; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 17 AWG; Minimum Wire Size: 20 AWG;
927852-8
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Cross Section Area: 1.03 mm2; Mounting Style: STRAIGHT; Maximum Cable Entry: .091 inch; Minimum Cable Entry: .055 inch;
927847-2
CONNECTOR ACCESSORY; Rated Current: 10 A; IEC Conformity: YES; Minimum Operating Temperature: -40 Cel; Cross Section Area: 1 mm2; Mounting Style: STRAIGHT;
927865-1
CONNECTOR ACCESSORY; Rated Current: 25 A; Minimum Cable Entry: .078 inch; Maximum Cable Entry: .129 inch; Minimum Wire Size: 20 AWG; Cross Section Area: 1 mm2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved