Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PDT; Contact Function: (ON)-(ON); Maximum DC Contact Voltage: 30 V; Maximum AC Contact Current: 20 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Toggle Switches 8-6437630-4 attributes and parameters. Explore more Toggle Switches devices from TE Connectivity
Center Contact Plating:
Maximum AC Contact Current:
Maximum DC Contact Current:
Contact Function:
Contact Resistance:
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
End Contact Material:
Insulation Resistance:
Mounting Feature:
Sealing:
Switch Function:
Switch Type:
Termination Type:
8-6437630-4 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
EU2B-YS2J03C
Idec
ROTARY SWITCH;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Meritek Electronics
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
7101K2ZQE2
C & K Components
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Solderability: MIL-STD;
2TL1-12
Honeywell Sensing And Control
2TL1-12 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 22.6in and sealing for dust and water proofing. It has a max operating temperature of 71°C, AC contact current of 15A, and DC contact voltage of 28V. Ideal for applications requiring a latched switch function, it features a lever actuator type and screw termination, suitable for panel mount-threaded installations.
1TL1-7N
1TL1-7N toggle switch by Honeywell Sensing And Control features a SPDT switch function with gold plating, suitable for applications requiring momentary switch action. With a max AC contact current of 15A@125VAC and DC contact current of 15A@28VDC, it is ideal for panel mount-threaded installations in environments with temperatures ranging from -65 to 71 °C. The toggle switch has a locking lever actuator type and dust-proof sealing, making it reliable for various industrial uses.
101TL1-3D
101TL1-3D by Honeywell Sensing And Control is a SPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this lever actuated switch operates at temperatures up to 71°C.
LT-2561-733-024
Carling Technologies
TOGGLE SWITCH; Manufacturer Series: LT;
MS24660-31K
Eaton Corporation
Eaton Corporation's MS24660-31K toggle switch has 20000 cycles electrical life, 4PDT switch function, and environmentally sealed sealing. Ideal for applications requiring a panel-mounted threaded lever actuator switch with max AC contact voltage of 115V and DC contact current of 20A at 28V.
M2012B2B1W01
Nkk Switches
TOGGLE SWITCH;
7301SYAW4SE
7301SYAW4SE by C & K Components is a 3PDT toggle switch with CHROME actuator and STAINLESS STEEL housing. It has an electrical life of 100,000 cycles, insulation resistance of 1G ohm, and can handle up to 2A AC current. Ideal for applications requiring reliable switching in harsh environments.
M2012SS1W01-BB
649H/2
Apem Components
The Apem Components 649H/2 Toggle Switch is a DPDT switch with electrical life of 6000 cycles. It has a max AC contact current of 15A@250VAC and operates b/w -20°C to 55°C. Ideal for panel mounting applications requiring latched switch action.
8530K39
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LEVER; Body Width: 15.09 inch; Maximum DC Contact Voltage: 28 V;
27ET14-T
27ET14-T by Honeywell Sensing And Control is a DPDT toggle switch with corrosion-proof sealing. It has a max DC contact voltage of 28V and can handle up to 7A@28VDC. Ideal for panel mounting applications requiring a latched switch function with a lever actuator.
MS90310-211
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LEVER; Maximum DC Contact Voltage: 28 V; Electrical Life: 20000 Cycle(s);
MS27721-23-1D
Otto Engineering
Otto Engineering's MS27721-23-1D toggle switch has a DPDT switch function with 30000 cycles electrical life. With moisture and water-proof sealing, it operates b/w -65 to 85 °C, handling up to 5A@115VAC or 28VDC. Ideal for panel mounting applications requiring a latched toggle switch with locking lever actuator.
1TL1-3G
1TL1-3G by Honeywell Sensing And Control is a dust-proof toggle switch with SPDT function. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mount applications, this switch features locking lever actuator and gold-plated contacts for reliable performance in temperatures ranging from -65 to 71 °C.
7560K5
The Eaton Corporation 7560K5 is a DPST toggle switch with 15A@125VAC rating. Featuring a lever actuator, screw termination, and latched switch action, it is ideal for panel mount-threaded applications requiring reliable AC current control up to 15A.
14TL1-3D
14TL1-3D by Honeywell is a 4PDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking type actuator, such as panel-mounted threaded installations in environments up to 71°C.
7103MD9ABE
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-OFF-ON; Solderability: MIL-STD;
1TL1-2G
1TL1-2G by Honeywell Sensing And Control is a SPST toggle switch with a locking lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring dust-proof sealing, it features latched switch action and screw termination, suitable for panel mount-threaded installations.
MTA406N
Tyco Electronics Alcoswitch
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PDT; Type (Actuator): LONG BAT; Terminal Finish: Gold (Au); DC Maximum Rating R Load (Contact): 4A@28VDC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TE Connectivity
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved