Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 776533-2 is a Combination Line Connector with dimensions of 1.509" x 1.449" x 1.24". It has a rated voltage of 250V, UL Flammability Code of 94-HB, and operates b/w -40°C to 125°C. This connector features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and is ideal for applications requiring a polarized, female contact style connector with strain relief mounting option.
Median Price
$4.600
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$3.612
100+ parts
$3.326
1k+ parts
$3.003
10k+ parts
-
Heilind Electronics
$3.661
$3.566
$3.353
Arrow
$3.712
$3.156
$2.783
$2.698
Chip1Stop
$3.740
TE Connectivity
$4.040
Farnell
$4.640
$2.860
$2.460
Mouser Electronics
$5.200
$3.910
$3.350
$2.980
Bürklin Elektronik
$5.380
DigiKey
$5.440
$4.093
$3.505
$3.130
Newark
$6.360
$5.140
$4.020
$3.680
Element14
$7.710
Powell Electronics
$9.703
$6.175
$5.557
TTI
$2.890
$2.810
$2.650
Master Electronics
$3.160
$2.900
Verical
$3.718
CustomConnectorKits
$1.990
Nova Conductors
$2.896
Digiode
$3.478
Vyrian
NAC Semi
$4.120
$3.800
VNN
Electro Sonic
$3.180
$2.170
IBS Electronics
$4.292
$3.787
TME
$4.150
Semicontronic
$2.510
$2.447
$2.435
Continental Prestige Electronics
$2.838
Argo Parts USA
Corphita
$3.295
Abacus Technologies
Assy Fe
GreenTree Electronics
Authorized Procurement Solutions
Netroflash
$2.752
$2.694
The compact size of the body makes the connector suitable for applications where space is limited.
The high rated voltage ensures that the connector can handle a range of electrical applications without risk of overloading.
With a high number of contacts, this connector can accommodate multiple connections, making it versatile for various applications.
The high maximum operating temperature allows the connector to perform reliably in heat-intensive environments.
The strain relief mounting option ensures that the connector remains securely in place, reducing the risk of damage to cables.
Combination Line Connectors 776533-2 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
776533-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 776yyy-y Wire Exit Hole 24/Jan/2014 Mult Devs - material chg 01/JUN/2021
PCN Assembly/Origin - 776yyy-y - tooling capacity 21/MAY/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
MBRS130LT3G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
DTP06-2S
TE Connectivity's DTP06-2S is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 25A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
1565380-1
TE Connectivity's 1565380-1 is a Combination Line Connector with dimensions of 0.827" x 1.299" x 0.622". Rated for 12V, it has 28 contacts and operates b/w -30°C to 105°C. Ideal for cable mounting applications, it features POLYBUTYLENE TEREPHTHALATE insulator material.
776200-1
TE Connectivity's 776200-1 is a combination line connector with dimensions of 2.394" x 1.264" x 0.757". It has a max operating temperature of 105°C and a min operating temperature of -40°C. This connector, made of POLYBUTYLENE TEREPHTHALATE, is suitable for board mounting applications and has a rated current of 8A.
DTM04-2P-E005
TE Connectivity's DTM04-2P-E005 is a 1.68" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features UL 94V-0 flammability, polarized key, and male contact gender suitable for cable mounting applications requiring a rated current of 7.5A.
DF62W-3EP-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
2066046-4
TE Connectivity 2066046-4 is a Combination Line Connector with 12V rated voltage and 125°C max operating temp. It has 4 contacts, rated at 20A for signal current. Ideal for applications requiring a connector with an empty shell and terminal pitch of 8.1mm.
DT04-6P-CL06
TE Connectivity's DT04-6P-CL06 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 6 contacts and UL certification.
ATP06-4S-RD01
Amphenol
Amphenol's ATP06-4S-RD01 is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signals, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female contact gender and crimp termination.
1-967629-1
TE Connectivity 1-967629-1 is a Combination Line Connector with dimensions of 1.476" x 1.396" x 1.205". Rated for 28V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40°C to 120°C. With 18 contacts, it's used in applications requiring CRIMP termination and PANEL mounting at mains ratings of 115/230VAC.
AT06-6S-OMBLK
The Amphenol AT06-6S-OMBLK is a combination line connector with 6 contacts, rated for 13A signal current. It has a compact body size of 0.882" x 0.874" x 1.815", suitable for cable mounting applications. With an operating temperature range from -55°C to 125°C, it uses crimp termination and mates with AT06-6P-OMBLK connectors.
DT06-3S-CE06
TE Connectivity's DT06-3S-CE06 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulation. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style.
0-0282104-1
TE Connectivity 0-0282104-1 is a Combination Line Connector with dimensions of 0.78"x.543"x1.654". Rated for 24V, it operates b/w -40 to 125°C. With GLASS FILLED PA insulator and POLARIZED key, it has 2 contacts for cable mounting applications.
33472-2001
Molex
Molex 33472-2001 is a 20-contact combination line connector with 2 loaded rows. It features female contacts, cable mounting, and crimp termination. Ideal for applications requiring receptacle connectors in various industries.
F083110
Aptiv
F083110 by Aptiv is a Combination Line Connector with 2 contacts, rated for 35A signal current. It operates b/w -40 to 125°C, featuring a copper alloy shell with TIN finish. Ideal for cable mounting applications, it offers crimp termination and round pin/socket contact style.
AT06-2S-GRN
The Amphenol AT06-2S-GRN is a combination line connector with 2 contacts, rated for 13A signal current. Featuring a body size of 0.713" x 0.591" x 1.126", it uses polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting, this female plug connector with round pin sockets is suitable for various applications requiring reliable signal connections.
AT06-12SA-SR2BK
The Amphenol AT06-12SA-SR2BK is a 12-contact combination line connector with female contact gender and square pin socket style. It has a max operating temperature of 125°C and min of -55°C, suitable for various applications. With dimensions of 1.772" x 0.827" x 1.713", it is commonly used in cable mounting setups.
AT04-4P-SR02BLK
The Amphenol AT04-4P-SR02BLK is a Combination Line Connector with 4 contacts, rated at 13A. It has a body size of 0.827" x 0.772" x 2.299", made of POLYETHYLENE for -55 to 125°C applications. Ideal for cable mounting, this male connector features round pin sockets in a receptacle shell design.
DRC10-40P-A004
TE Connectivity's DRC10-40P-A004 is a 4-row combination line connector with dimensions of 0.855" x 3.851" x 0.895". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, this male connector features solder termination and UL certification.
12065287
Aptiv's 12065287 is a Combination Line Connector with TIN finish, POLYBUTYLENE TEREPHTHALATE insulator. Featuring 3 contacts, FEMALE gender, it is used for cable mounting applications in automotive industry.
DTM04-2P-P007
TE Connectivity's DTM04-2P-P007 is a 2" x 0.651" x 1.473" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V, it has UL 94V-0 flammability code and supports up to 7.5A signal current. Ideal for panel mounting applications requiring a polarized male receptacle connector with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
776523-1
TE Connectivity 776523-1 is a Combination Line Connector with dimensions of 0.978"x1.449"x.925". It has a rated voltage of 250V, UL Flammability Code 94-HB, and operates b/w -40 to 125 °C. Ideal for applications requiring a polarized connector with 13A signal current rating and female contact gender.
776536-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Option-2: W/STRAIN RELIEF; Rated Current - Signal: 13 A; IEC Conformity: NO;
776534-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Empty Shell: YES; Mains Connector Rating: 13A;
776538-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED; Reference Standard: UL;
776531-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Maximum Operating Temperature (Cel): 125; Contact Material: NOT SPECIFIED;
776537-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mounting Option-2: W/STRAIN RELIEF; Mating Contact Row Spacing (inch): 0.209;
776534-2
TE Connectivity's 776534-2 is a Combination Line Connector with dimensions of 0.772"x1.872"x.745". It has a rated voltage of 250V, UL Flammability Code 94-HB, and can handle temperatures from -40 to 125°C. This connector is ideal for applications requiring a polarized, male contact style with 13A signal current rating.
776535-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Contact Style: RND PIN-SKT; UL Flammability Code: 94-HB;
776539-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Rated Voltage: 250 V; Polarization Key: POLARIZED;
776533-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; No. of Ports: 1; Rated Current - Signal: 13 A;
776522-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Rated Voltage: 250 V; Rated Current - Signal: 13 A;
776522-1
TE Connectivity 776522-1 is a Combination Line Connector with dimensions of 0.8"x1.447"x.925". It has a rated voltage of 250V, UL Flammability Code 94-HB, and operates b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 13A signal current rating and female contact gender.
776523-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 3; Contact Material: NOT SPECIFIED; Rated Voltage: 250 V;
776532-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; MIL Conformity: NO; Panel Mount: NO;
776539-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
776534-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Terminal Pitch (mm): 4.5; Body Depth: .745 inch;
776535-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Filter Feature: NO; No. of Rows Loaded: 1;
776536-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mounting Type: CABLE; Polarization Key: POLARIZED;
776538-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: NOT APPLICABLE; EMI Shielded: NO;
776539-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: RND PIN-SKT; Mating Contact Row Spacing (inch): 0.209; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved