Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 770985-1 is a male contact with crimp terminal type for 600V rated voltage applications. Constructed with stranded brass material, it supports wire gauge from 26 to 22 AWG and rated current of 9.5A. Ideal for plug or cap housing in power design, suitable for discrete wire cable types.
Median Price
$0.129
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Boersig
1+ parts
$0.087
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.096
Heilind Electronics
$0.121
$0.098
Interstate Connecting
$0.128
$0.104
Conrad
$0.247
$0.215
RS Americas
$0.293
$0.223
$0.179
Mouser Electronics
$0.310
$0.180
$0.133
$0.122
DigiKey
$0.226
$0.192
$0.178
RS (Exports)
$0.320
$0.269
$0.228
TE Connectivity
$0.340
$0.220
$0.160
Powell Electronics
$0.417
$0.292
Farnell
$0.102
Verical
$0.109
Master Electronics
$0.088
NEP Electronics
$0.130
$0.113
Element14
$0.144
$0.141
$0.135
TTI
$0.083
Future Electronics
PEI Genesis
Avnet
$0.054
Newark
$0.148
Chip1Stop
DF Sales Co.
$0.080
Nova Conductors
$0.119
Electro Enterprises
$0.184
$0.131
FDH Electronics
$0.167
TME
$0.300
$0.118
IBS Electronics
$0.194
$0.146
NAC Semi
$0.200
Rapid Electronics
$0.120
Sensible Micro Corp
VNN
Powertech Controls
Bisco
Lakeview Electronics
Resion
EMSNET
Aranea Global
$0.117
$0.112
Argo Parts USA
$0.115
Assy Fe
Perfect Parts
GreenTree Electronics
Kepictronics
Continental Prestige Electronics
$0.162
$0.092
Eastek
Robosynatics
$5.637
$5.220
Lucentia Tech
EMSNET (Excess)
CSA and UL approvals ensure that the product meets high safety and quality standards, making it a reliable choice for use in electrical applications.
With a high rated voltage of 600V, this product can safely handle higher voltage applications without risking damage or malfunction.
The high maximum operating temperature of 105°C allows this product to withstand heat and operate effectively in various environments without overheating.
Brass material offers excellent conductivity, durability, and corrosion resistance, making this product a reliable choice for long-term use.
With a rated current of 9.5A, this product can handle high current applications without overheating or experiencing performance issues.
Assembly Products 770985-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
770985-1 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
0462-203-08141
TE Connectivity's 0462-203-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire sizes ranging from 10 to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable FEMALE contacts.
KT0009
Bulgin
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: RETAINER CLIP; IEC Conformity: NO; Material: STEEL;
5318201
Altech
CONNECTOR ACCESSORY; Maximum Operating Temperature: 120 Cel; DIN Conformity: NO; Material: GLASS FILLED POLYAMIDE6; Additional Features: IP68; Minimum Operating Temperature: -30 Cel;
AW12S
Amphenol
AW12S by Amphenol is an assembly product designed for AT series connectors. It has a temperature range of -55°C to 125°C, with polyethylene material. Supports wire sizes from 20 AWG to 14 AWG, making it ideal for various industrial applications.
13697414
Aptiv
Aptiv 13697414 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0551-0.0748 inch cable entry. Ideal for automotive wiring harness assemblies due to its precise crimping and compatibility with specified cable types.
13711546
Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.
64322-1029
Molex
Molex 64322-1029 CONTACT features CRIMP terminal type for 18 AWG wire. Suitable for applications requiring FEMALE contact gender with cable entry from 0.0629 to 0.0748 inch.
5206514-1
TE Connectivity's 5206514-1 LOCKING POST KIT features a Finish Thickness of 400, Max Wire Size of 0 AWG, and Material made of STEEL. Ideal for applications requiring secure assembly with Mounting Options: #4-40 SCREW.
M23053/5-103-9
Insultab
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
W2SB-P012
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Material: POLYBUTYLENE TEREPHTHALATE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
204370-2
TE Connectivity's 204370-2 is a CRIMP terminal CONTACT for 2221860 SERIES CONNECTOR with finish thickness of 50, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a rated current of 5 A and operates b/w -55 °C to 125 °C, making it ideal for SIGNAL applications requiring male contact gender.
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
206966-1
CONNECTOR ACCESSORY; Material: THERMOPLASTIC; Assembly Item Name: CLAMPING ITEM; Maximum Cable Entry: .453 inch;
3200043
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): CSA; UL; Material: COPPER ALLOY; DIN Conformity: NO;
206138-8
TE Connectivity's 206138-8 cable clamp has UL approval, shell size of 23, and max wire size of 0 AWG. It is made of polyethylene and mounts straight with a screw option. Ideal for securing cables in various assemblies.
RC16M23K
Souriau-sunbank Connection Technologies
RC16M23K by Souriau-sunbank is a CRIMP terminal CONTACT with MACHINED design for 750V AC, 13A current. It's used in RC/RM SERIES CONNECTOR for SIGNAL applications, accepting wire sizes from 30-14 AWG and COAXIAL cables up to 3.2".
207445-3
TE Connectivity's 207445-3 is a RECEPTACLE with Shell Sizes of 17. It can operate b/w -55 to 105°C, accommodating wire sizes up to 0 AWG. Made of POLYETHYLENE, it's ideal for various Assembly Products applications.
7810.6412.0
CONNECTOR ACCESSORY;
08-50-0108
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
770904-1
TE Connectivity's 770904-1 is a plug housing with stranded construction and crimp terminal type. It has a rated voltage of 600V and can handle temperatures from -55 to 105 °C. This power contact, made of brass, is suitable for discrete wire applications with cable entry ranging from 0.059 to 0.094 inch.
770988-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Construction: STRANDED; Mounting Style: STRAIGHT; IEC Conformity: NO;
770903-1
TE Connectivity's 770903-1 is a male contact assembly item with approvals from CSA and UL. It features a rated voltage of 600V, construction for stranded wires, and crimp terminal type. Ideal for plug or cap housing applications with wire gauge ranging from 18 AWG to 22 AWG.
770902-1
TE Connectivity 770902-1 is a CSA/UL approved plug housing with stranded construction. It has a rated voltage of 600V, suitable for 22-26 AWG wires. Ideal for power applications, featuring female contacts and brass material.
770986-1
TE Connectivity 770986-1 is a female contact plug housing with crimp terminal type. It has a rated voltage of 600V, suitable for discrete wire applications. Constructed with stranded brass material, it can handle up to 9.5A current at temperatures ranging from -55°C to 105°C.
770985-3
TE Connectivity 770985-3 is a male contact assembly product with brass construction. It has a rated voltage of 600V and can accommodate wire sizes from 26 to 22 AWG. Ideal for power applications, it features crimp terminals and operates b/w -55°C to 105°C.
770902-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Minimum Operating Temperature: -55 Cel; Approvals (V): CSA; UL; Rated DC Voltage: 600 V;
770988-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Mounting Style: STRAIGHT; Minimum Operating Temperature: -55 Cel; Construction: STRANDED;
770902-6
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Rated DC Voltage: 600 V; Minimum Wire Size: 26 AWG; MIL Conformity: NO;
770902-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Material: PHOSPHOR BRONZE; Maximum Wire Size: 22 AWG; MIL Conformity: NO;
770901-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Approvals (V): CSA; UL; Assembly Item Name: CONTACT; Maximum Operating Temperature: 105 Cel;
770901-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Contact Gender: MALE; Terminal Type: CRIMP; Cross Section Area: .4 mm2;
770986-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Minimum Wire Size: 26 AWG; Maximum Wire Size: 22 AWG; IEC Conformity: NO;
770987-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Mounting Style: STRAIGHT; Maximum Wire Size: 18 AWG; Cross Section Area: .9 mm2;
770987-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Maximum Wire Size: 18 AWG; Cable Types: DISCRETE WIRE; Material: BRASS;
770903-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Assembly Item Name: CONTACT; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN LEAD (100) OVER NICKEL; Wire Gauge (AWG): 18;
770904-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Maximum Cable Entry: .094 inch; Cross Section Area: .9 mm2; Approvals (V): CSA; UL;
770904-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Cross Section Area: .9 mm2; Design: POWER; Maximum Operating Temperature: 105 Cel;
770904-6
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Cable Types: DISCRETE WIRE; Rated DC Voltage: 600 V; Material: PHOSPHOR BRONZE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved