Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 3 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Minimum Frequency: 19 dB; Minimum Frequency: .01 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Assy Fe
1+ parts
100+ parts
1k+ parts
10k+ parts
EMI Mains Filters 6609054-4 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Additional Features:
Approvals (V):
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
High Pot:
Insertion Loss At Maximum Frequency:
Insertion Loss At Minimum Frequency:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
First Components International
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Fairchild Semiconductor
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
20EQ1
TE Connectivity
TE Connectivity's 20EQ1 is a single-phase EMI filter with a rated voltage of 250V. It offers insertion loss of 6dB at min frequency and 10dB at max frequency. This panel mount filter, approved by UL, CSA, and VDE, is suitable for applications requiring high pot voltage up to 2250V and a rated current of 20A.
EAC-10-102-D
Cosel
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
250APS12L
The TE Connectivity 250APS12L is a UL-approved EMI mains filter with a rated voltage of 520V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, making it suitable for panel mounting in various industrial applications requiring high-potential and low-leakage current protection.
FN2412-32-33
Schaffner Holding Ag
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
FN2090-10-06
FN2090-10-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 11.2A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. Ideal for panel mounting applications with dimensions of L94.0xB56.0xH45.4mm.
25FCD10
TE Connectivity's 25FCD10 EMI Mains Filter is a UL approved three-phase filter with insertion loss of 13-35 dB. Rated at 277V and 25A, it operates b/w -10°C to 40°C, with dimensions of L214.0xB159.0xH64.0 mm. Ideal for applications requiring high-potential and low leakage current protection in industrial settings.
CMS1-4-R
Eaton Corporation
Eaton Corporation's CMS1-4-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.8A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
6MV1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 6 A; Insertion Loss At Maximum Frequency: 50 dB; Maximum Leakage Current: .07 mA; Minimum Frequency: .15 MHz;
FN355-10-05
Schaffner Holding Ag's FN355-10-05 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, UL, CSA, SEMKO approvals. It operates at -25 to 100 °C and has a high pot of 1900V. With dimensions of L65.0XB50.0XH40.3 (mm), it is ideal for PANEL MOUNT applications in systems requiring up to 11.5A current handling capacity at 400Hz frequency.
FN406B-6-02
Schaffner Holding Ag's FN406B-6-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 6A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2500V. Ideal for applications requiring through-hole mounting in various industries.
SN8S-130
KEMET Corporation
KEMET Corporation's SN8S-130 is a SINGLE PHASE EMI FILTER with 5A rated current, operating from -25°C to 105°C. With an 18mm diameter and 9mm height, it is designed for THROUGH HOLE MOUNT applications in EMI mains filtering.
FIL-1S-1-10A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
NAH-20-472
NAH-20-472 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and dimensions of L92.0XB53.0XH41.0 (mm), it is suitable for chassis mount applications requiring up to 20A current capacity.
SSRH7HS-M04467
SSRH7HS-M04467 by KEMET is a UL-approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures from -25°C to 120°C, rated for 250V and 0.4A. This single-phase filter, measuring 14.5mm x 18mm x 12mm, is designed for through-hole mounting applications.
RN102-0.3-02-12M
RN102-0.3-02-12M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.3A current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L14.0xB14.0xH9.0 mm for through-hole mounting in various electronic devices.
CMS1-6-R
CMS1-6-R by Eaton Corp is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.1A. This single-phase filter is surface-mounted and compactly sized at L9.4xB7.2xH2.6mm, suitable for various electronic applications.
RN114-0.3-02-47M
Schaffner Holding Ag's RN114-0.3-02-47M EMI Mains Filter, rated at 300V and 0.3A, is UL, IEC, VDE, ENEC-10 approved. With a single-phase filter type and operating temperatures from -40 to 100°C, it's ideal for applications requiring through-hole mounting in 50/60Hz environments.
6EQ1
SINGLE PHASE EMI FILTER; Maximum Frequency: .02 MHz; Rated Current: 6 A; Dimensions: L113.5XB57.7XH45.7 (mm)/L4.47XB2.27XH1.8 (inch); Length: 113.5 mm; Approvals (V): UL; CSA; VDE;
RSHN-2006L
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 52.0; High Pot: 2500 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
3-103-715
Schurter Ag
Schurter Ag's 3-103-715 EMI Mains Filter is a single-phase filter with 250V rated voltage and 3A rated current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries due to its compact size of 25mm x 104mm x 82.6mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved