Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 5745653-5 backshell has 3 shell sizes, shielding, and 0.25" min cable entry. Ideal for applications requiring a max operating temp of 105°C and min of -55°C. Made of zinc alloy with #4-40 or screw mounting options, accommodating up to 0 AWG wire size and 0.55" max cable entry.
Median Price
$23.900
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Verical
1+ parts
$22.820
100+ parts
$18.580
1k+ parts
$17.080
10k+ parts
-
Arrow
TE Connectivity
$24.980
$22.120
$20.190
RS Americas
$26.960
DigiKey
$30.900
$22.322
$19.929
Powell Electronics
$20.197
$12.429
$9.943
Chip1Stop
Nova Conductors
$18.535
IBS Electronics
$62.257
$29.845
$29.242
Vyrian
VNN
Rapid Electronics
Aranea Global
$18.165
$17.438
Continental Prestige Electronics
AZTECH Wire
$20.720
Glotronic Ltd.
Assy Fe
Argo Parts USA
Perfect Parts
Having three shell sizes allows for versatility in accommodating different cable sizes and configurations.
The shielding provides protection against electromagnetic interference, ensuring signal integrity in the assembly.
Allows for compatibility with various cable diameters, providing flexibility in cable connections.
With a high maximum operating temperature, this product is suitable for use in a wide range of environments without risk of overheating.
The low minimum operating temperature allows for use in extreme cold conditions without performance issues.
The backsheel design provides additional protection to cable connections and ensures a secure assembly.
Supports cables up to 0 AWG in size, making it suitable for a wide range of applications requiring larger wire sizes.
Accommodating cable entries up to 0.55 inch allows for easy installation and compatibility with larger cables.
Zinc alloy offers a good balance of strength and corrosion resistance, ensuring durability and longevity of the product.
The screw mounting option provides a secure and reliable attachment method for the assembly, preventing loosening or disconnection.
The #4-40 mounting option ensures compatibility with standard hardware, facilitating easy installation and assembly.
Assembly Products 5745653-5 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shell Sizes:
Shielding:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Transistor
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
9025760000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 24 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; MIL Conformity: NO;
08-50-0113
Molex
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
76823-0321
Molex 76823-0321 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. Ideal for applications requiring 16-14 AWG wire sizes such as 170001 and 171692 assemblies.
C88E000218M26S
Northern Technologies
CONNECTOR ACCESSORY; Mounting Option-1: M2.6; DIN Conformity: NO; Assembly Item Name: COVER ITEM; Mounting Option-2: SCREW; Material: ZINC ALLOY;
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
3003
Keystone Electronics
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Additional Features: LOW PROFILE; MIL Conformity: NO; Terminal Type: SOLDER;
6648400-1
TE Connectivity 6648400-1 is a POWER female contact with SOLDER terminal type. It has a rated current of 75A, suitable for wire sizes up to 0 AWG. With operating temperatures from -55°C to 105°C, it is ideal for high-power applications requiring reliable connections.
3026049
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 3026049;
SXA-001T-P0.6
J S T Mfg
SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.
12048074
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; IEC Conformity: NO; Assembly Item Name: CONTACT;
RJFTVC7N
Amphenol
CONNECTOR ACCESSORY; Approvals (V): UL; Maximum Operating Temperature: 85 Cel; DIN Conformity: NO; Minimum Operating Temperature: -40 Cel; Assembly Item Name: METAL CAP;
VN020160002(1)
Amphenol's VN020160002(1) features crimp terminal type, 600V AC/DC voltage rating, and 14A current. Ideal for applications requiring stamped contact design, with wire sizes ranging from 26-16 AWG. Suitable for use in environments with temperatures b/w -40 to 125°C.
1735801-1
TE Connectivity's 1735801-1 CONTACT is a FEMALE signal connector with rated voltage of 250V and current of 3A. It supports wire gauge from 30 to 24 AWG, operating temperatures from -25 to 105 °C, and is ideal for applications requiring DISCRETE WIRE connections like part numbers 1735447 and 2041423.
183025-1
TE Connectivity's 183025-1 is a CRIMP terminal with a wire gauge range of 18 AWG to 15 AWG. It has a max operating temperature of 125°C and can handle a rated current of 14 A. This CONTACT assembly product, made of PHOSPHOR BRONZE, is commonly used in connectors for various applications.
16-02-0069
CONNECTOR ACCESSORY;
0460-202-1631
TE Connectivity's 0460-202-1631 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C, suitable for wire gauges 16-20 AWG. With a rated current of 13 A, it is commonly used in male contact applications requiring a straight mounting style and round pin-socket contact design.
AWP-4S
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: WEDGE LOCK; Usage: ATP06; DIN Conformity: NO; Material: POLYETHYLENE;
SVH-21T-P1.1
SVH-21T-P1.1 by J S T Mfg is a VH series connector with crimp terminal type, rated for 250V AC/DC and 7A current. It has approvals from CSA, TUV, and UL, with operating temperatures ranging from -25°C to 85°C. Ideal for applications requiring a female contact gender and wire sizes b/w 22-18 AWG.
13697409
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: CONTACT; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Cable Entry: .075 inch;
2002-1492
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END PLATE; MIL Conformity: NO; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5745171-1
CONNECTOR ACCESSORY; Shielding: YES; IEC Conformity: NO; Maximum Wire Size: 0 AWG; MIL Conformity: NO; Material: ZINC ALLOY;
5745647-1
CONNECTOR ACCESSORY; Mounting Option-1: #4-40; Assembly Item Name: HARDWARE-RETAINING SCREW; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
5745563-1
CONNECTOR ACCESSORY; Additional Features: INDIVIDUAL KIT; Maximum Wire Size: 0 AWG; Mounting Option-2: SCREW; Material: STEEL; MIL Conformity: NO;
5745171-5
CONNECTOR ACCESSORY; Shielding: YES; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0; Assembly Item Name: BACKSHELL; MIL Conformity: NO;
5-745287-4
CONNECTOR ACCESSORY; Rated Current: 3.1 A; IEC Conformity: NO; Material: BRASS; Mounting Style: STRAIGHT; MIL Conformity: NO;
5745833-5
CONNECTOR ACCESSORY; Shielding: YES; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: CLAMP KIT; DIN Conformity: NO;
5745174-3
CONNECTOR ACCESSORY; Shielding: YES; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0; IEC Conformity: NO; Mounting Option-1: #4-40;
5745833-1
CONNECTOR ACCESSORY; Shielding: YES; DIN Conformity: NO; Mounting Option-2: SCREW; Shell Sizes: 3; MIL Conformity: NO;
5745173-1
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; Shell Sizes: 3; Maximum Cable Entry: .55 inch; Minimum Operating Temperature: -55 Cel;
5745122-2
CONNECTOR ACCESSORY; Shielding: NO; Material: POLYPROPYLENE; Wire Gauge (AWG): 0; DIN Conformity: NO; Assembly Item Name: BACKSHELL;
5745173-5
TE Connectivity's 5745173-5 backshell is a zinc alloy assembly product with 3 shell sizes and shielding. It supports plug/receptacle applications, with a min cable entry of 0.25" and max operating temperature of 85°C. Ideal for #4-40 screw mounting, it accommodates up to 0 AWG wire size.
5745174-1
TE Connectivity's 5745174-1 backshell is a zinc alloy assembly product with 4 shell sizes and shielding. It supports plug/receptacle applications, with a min cable entry of 0.35" and max wire size of 0 AWG. Ideal for temperatures ranging from -55°C to 85°C, it offers mounting options using #4-40 screws.
5745854-1
TE Connectivity's 5745854-1 backshell features shielding, 0.19" min cable entry, and 0 AWG wire size. Ideal for plug/receptacle applications with temp range -55 to 85°C. Mounting options include #4-40 screw.
5745854-3
CONNECTOR ACCESSORY; Shielding: YES; DIN Conformity: NO; Mounting Option-2: SCREW; Additional Features: ROHS COMPLIANT, SHIELDED; Shell Sizes: 1;
5745175-2
CONNECTOR ACCESSORY; Shielding: YES; Additional Features: ROHS COMPLIANT, SHIELDED; Mounting Option-1: #4-40; Usage: PLUG/RECEPTACLE; MIL Conformity: NO;
5745172-1
CONNECTOR ACCESSORY; Shielding: YES; Usage: JACKETED CABLE; Maximum Cable Entry: .55 inch; MIL Conformity: NO; Mounting Option-1: #4-40;
5745652-4
CONNECTOR ACCESSORY; Shielding: YES; Mounting Option-2: SCREW; Assembly Item Name: BACKSHELL; Minimum Operating Temperature: -55 Cel; DIN Conformity: NO;
5745652-2
TE Connectivity 5745652-2 is a Shielded Clamping Item with Shell Size 2. Made of Zinc Alloy, it supports wire up to 0 AWG. Operating temperature ranges from -55°C to 105°C, ideal for secure assembly in various applications.
5745174-4
CONNECTOR ACCESSORY; Shielding: YES; Assembly Item Name: BACKSHELL; Minimum Cable Entry: .35 inch; MIL Conformity: NO; Maximum Wire Size: 0 AWG;
5745653-2
CONNECTOR ACCESSORY; Shielding: YES; Maximum Operating Temperature: 105 Cel; Shell Sizes: 3; DIN Conformity: NO; Additional Features: ROHS COMPLIANT, SHIELDED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved