Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 55PC0211-8-9CS2502 is a flexible cord with copper alloy conductor, rated for 600V. With a max operating temp of 150°C and -65°C min, it is suitable for various electrical applications requiring an 8 AWG wire gauge.
Median Price
$19.771
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
$18.609
10k+ parts
Nova Conductors
$4.480
Vyrian
VNN
Semicontronic
$1.500
$1.462
$1.455
Argo Parts USA
$4.270
Continental Prestige Electronics
$4.184
Aztec Data Supply Inc.
$4.431
Netroflash
$4.390
AZTECH Wire
$13.660
High rated voltage makes it suitable for use in various electrical applications where higher voltage is required.
Tin conductor finish helps in reducing oxidation and corrosion, increasing the lifespan of the wires and cables.
The high maximum operating temperature ensures that the wires and cables can withstand heat and perform effectively in high temperature environments.
Low minimum operating temperature allows the wires and cables to function efficiently even in extremely cold conditions.
Thicker wire gauge (AWG 8) provides better conductivity and lower electrical resistance, improving the overall performance of the wires and cables.
Copper alloy conductor material offers excellent conductivity and durability, ensuring reliable electrical connections.
Being able to accommodate maximum wire size of 8 AWG allows for flexibility in various wiring applications.
SPEC 55 cables are known for their high performance, durability, and reliability, making them a preferred choice for critical applications.
The flexibility of the cord and fixture wire makes it easier to install and maneuver around tight spaces, offering versatility in applications.
Electrical Wires & Cables 55PC0211-8-9CS2502 attributes and parameters. Explore more Electrical Wires & Cables devices from TE Connectivity
Cable Types:
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Wire Gauge (AWG):
Maximum Wire Size:
Wire & Cable Name:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microsemi
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Eic Semiconductor
Diotec Semiconductor Ag
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
7919A0101000
Belden
Wires and Cables;
5875WH005
Alpha Wire
Alpha Wire's 5875WH005 is a stranded electrical wire with silver finish, rated at 1000V. Featuring PTFE insulation, it operates b/w -60 to 200°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326mm² cross-section area, and 0.046 ohm resistance.
44A0111-20-09-US
TE Connectivity
WIRE AND CABLE;
C3365/15SF
3m Electronic Products Division
3m Electronic Products Division's C3365/15SF is a 300V UL/CUL approved flat flexible cable with 15 tinned copper conductors. Featuring PVC insulation, it has a temperature range of -20 to 105°C and AWG 28 wire gauge. Ideal for electrical applications requiring flexibility and durability.
M22759/11-22-5
Specialty Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 200 Cel; Construction: STRANDED; Diameter: 1.24 mm;
UC-20AMM-QA8A01
Amphenol
Amphenol UC-20AMM-QA8A01 cable features UL approval, PVC jacket, and shielding. With USB C to USB A connectors, 24 AWG wire gauge, and 4 conductors, it's ideal for data transfer in various electrical applications.
1200661014
CABLE ASSEMBLY;
070488-000
83264
Helukabel
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; Maximum Operating Temperature: 80 Cel; Jacket Material: POLYVINYL CHLORIDE; Minimum Operating Temperature: -20 Cel;
15810
Helukabel 15810 is a CE and EAC approved stranded wire with PVC insulation. It has a rated voltage of 450V, suitable for switch cabinet construction and lab measurement setups. With DIN conformity, it operates b/w -15°C to 80°C, featuring bare copper conductor material in a flexible cord type.
94180601000
Belden 94180601000 is a stranded cable with PVC jacket, tinned copper conductor, and shielding. It has approvals from CE, CEC, UL for communication & control applications. Rated voltage of 300V, operating temp range -20 to 80°C make it suitable for various electrical installations.
100G0111-1.50-9
TE Connectivity's 100G0111-1.50-9 is a stranded electrical wire with TIN finish, rated for 1300V and operating temperatures from -55 to 125°C. With a cross-section area of 1.5mm², it is ideal for flexible cord and fixture wire applications requiring a max wire size of 15 AWG.
M22759/11-22-2
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Insulator Material: EXTRUDED POLYTETRAFLUOROETHYLENE; Conductor Finish: SILVER;
30752
PX0843/B
Bulgin
Bulgin's PX0843/B cable assembly features UL approval, PVC jacket and shielding, suitable for USB B Type to connector connection. Rated for 30V voltage, 1A current with operating temperatures from 0°C to 70°C. Ideal for electrical connections in various applications.
3365/26SF
3m Electronic Products Division's 3365/26SF is a UL-approved FLAT FLEXIBLE CABLE with 26 conductors of STRANDED TINNED COPPER. Featuring POLYVINYL CHLORIDE insulation, it operates b/w -20 to 105 °C, ideal for electrical wiring applications.
PMHDMF-4
Infinite Electronics International
6547UE8771000
52197
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; Wire Gauge (AWG): 24; Approvals (V): DNV GL; EAC; Insulator Material: CROSS-LINKED POLYOLEFIN-COPOLYMER;
3053/1BK001
Alpha Wire 3053/1BK001 is a solid wire with tin finish, rated at 300V. Featuring PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to its copper alloy conductor and 0.518mm² cross-section area.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
55PC0211-24-9CS2502
TE Connectivity's 55PC0211-24-9CS2502 is a 600V rated wire with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring 24 AWG copper alloy conductor and 19X36 stranding, it is ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.
55PC0211-20-9CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Maximum Wire Size: 20 AWG; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 20; Conductor Material: COPPER ALLOY;
55PC0211-24-9
WIRE AND CABLE; Rated Voltage: 600 V; Maximum Wire Size: 24 AWG; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Stranding: 19X36; No. of Conductors: 1;
55PC1121-22-8/98-9
WIRE AND CABLE; Rated Voltage: 600 V; Conductor Finish: TIN; Maximum Wire Size: 22 AWG; Wire Gauge (AWG): 22; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
55PC0211-16-9CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Conductor Material: COPPER ALLOY; Conductor Finish: TIN; Minimum Operating Temperature: -65 Cel; No. of Conductors: 1;
55PC2121-12-9/96-9
WIRE AND CABLE; Rated Voltage: 600 V; Conductor Finish: TIN; Minimum Operating Temperature: -65 Cel; Conductor Material: COPPER ALLOY; Wire Gauge (AWG): 12;
55PC0211-22-5LL-CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Maximum Operating Temperature: 150 Cel; Conductor Material: COPPER ALLOY; Stranding: 19X34; Conductor Finish: TIN;
55PC0211-18-9CS2502
TE Connectivity's 55PC0211-18-9CS2502 is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150 °C operating range, it's ideal for electrical applications requiring 18 AWG wire such as fixtures and cables.
55PC0242-16-3/5/6/9
WIRE AND CABLE; Rated Voltage: 600 V; Conductor Material: COPPER ALLOY; Wire Gauge (AWG): 16; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature: 200 Cel;
55PC1111-14-9-9
TE Connectivity's 55PC1111-14-9-9 is a flexible cord with copper alloy conductor, rated for 600V. With TIN finish and -65 to 200°C operating range, it suits electrical applications requiring up to 0 AWG wire size. Ideal for various industries needing reliable cables like SPEC 55 type.
55PC1211-22-9-9CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Maximum Operating Temperature: 200 Cel; Conductor Finish: TIN; Cable Types: SPEC 55; Minimum Operating Temperature: -65 Cel;
55PC1111-22-9-9CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Conductor Finish: TIN; Minimum Operating Temperature: -65 Cel; Conductor Material: COPPER ALLOY; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
55PC0211-10-9CS2502
TE Connectivity's 55PC0211-10-9CS2502 is a flexible cord and fixture wire with a rated voltage of 600V. It features a conductor finish of TIN and can operate in temperatures ranging from -65°C to 150°C. This wire, made of copper alloy, is commonly used in electrical applications requiring a max wire size of 10 AWG.
55PC0214-24-9CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Conductor Material: COPPER ALLOY; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Operating Temperature: 200 Cel; Minimum Operating Temperature: -65 Cel;
55PC1214-22-9-9CS2502
55PC1132-12-3/6/9-3
WIRE AND CABLE; Rated Voltage: 600 V; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Conductor Finish: SILVER; Cable Types: SPEC 55; Conductor Material: COPPER ALLOY;
55PC1812-22-9-9
WIRE AND CABLE; Rated Voltage: 600 V; Minimum Operating Temperature: -65 Cel; Conductor Finish: SILVER; Cable Types: SPEC 55; Maximum Operating Temperature: 200 Cel;
55PC0211-12-9CS2502
WIRE AND CABLE; Rated Voltage: 600 V; Stranding: 37X28; Maximum Operating Temperature: 150 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Wire Size: 12 AWG;
55PC0811-26-9
TE Connectivity's 55PC0811-26-9 cable features stranded construction, tin finish, and radiation-crosslinked modified ETFE insulator. With a rated voltage of 600V, it is ideal for flexible cord and fixture wire applications requiring a temperature range from -65°C to 150°C.
55PC0211-8-90
WIRE AND CABLE; Rated Voltage: 600 V; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Wire Size: 0 AWG; Conductor Material: COPPER ALLOY; Cable Types: SPEC 55;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved