Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 55A0811-22-0 is a STRANDED wire with TIN finish, rated at 600V. Ideal for AIRFRAME and MEDIUM WEIGHT applications, it operates b/w -65 to 150 °C, with a conductor made of COPPER ALLOY. Featuring a diameter of 1.27mm and stranding of 19X34, this FLEXIBLE CORD AND FIXTURE WIRE is designed for use in various electrical setups.
Median Price
$5.885
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Master Electronics
1+ parts
$1.870
100+ parts
-
1k+ parts
$1.860
10k+ parts
WireMasters
DigiKey
$9.900
$9.318
$9.131
Nova Conductors
$1.105
VNN
Vyrian
Rapid Electronics
Quittner & Schimek s.r.o.
Bastille Electronics
$1.050
$0.997
$0.983
Argo Parts USA
Continental Prestige Electronics
$1.083
Aztec Data Supply Inc.
$2.722
AZTECH Wire
$10.090
The stranded construction provides flexibility and durability, making it suitable for bending and movement in various applications.
The high rated voltage ensures safety and reliability in electrical installations requiring a higher voltage.
The tin finish enhances conductivity and corrosion resistance, ensuring efficient transmission of electricity and longevity of the wire.
Designed for use in airframe applications and medium weight installations, providing the necessary strength and performance in such environments.
With a maximum operating temperature of 150°C, this wire can handle high temperature environments without degradation in performance.
Capable of operating in extremely low temperatures down to -65°C, making it suitable for a wide range of environments.
The 22 AWG gauge is ideal for various applications requiring a specific wire size for optimal performance.
The specific diameter of 1.27 mm ensures compatibility and efficiency in installations that require this wire size.
The stranding of 19X34 provides flexibility and durability, making the wire suitable for applications that require bending and movement.
The cross-sectional area of 0.38 mm2 meets the requirements for conductivity and performance in various electrical installations.
The copper alloy conductor material offers excellent conductivity and durability, ensuring reliable performance in electrical systems.
With a maximum wire size of 22 AWG, this wire is suitable for applications that require this specific gauge for optimal performance.
Designed to meet SPEC 55 standards, ensuring compatibility and reliability in applications that require conformance to this specification.
Suitable for use as flexible cord and fixture wire, providing versatility and reliability in various electrical applications.
Electrical Wires & Cables 55A0811-22-0 attributes and parameters. Explore more Electrical Wires & Cables devices from TE Connectivity
Application:
Cable Types:
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
Diameter:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Shielding:
Stranding:
Wire Gauge (AWG):
Maximum Wire Size:
Wire & Cable Name:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Protek Devices
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Sensitron Semiconductor
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
44A0111-20-6
TE Connectivity's 44A0111-20-6 cable is a stranded wire with 600V rating, TIN finish, and 20 AWG gauge. Ideal for general purpose applications, it has a temperature range of -65 to 150°C. This flexible cord and fixture wire features copper alloy conductor material in a compact diameter of 1.4mm.
3-1437356-0
3-1437356-0 by TE Connectivity is a 28 AWG stranded flat cable with PVC jacket, UL approval, and tin finish. It has 10 conductors, rated for 300V DC voltage and 2A current. Ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20 to 105°C.
095FJZFJZAH-012
Amphenol
CABLE ASSEMBLY;
M17/94-RG179
Harbour Industries
WIRE AND CABLE; Rated Voltage: 1200 V; Shielding: YES; No. of Conductors: 1; Approvals (V): MIL; Insulator Material: PTFE;
FFSD-05-D-02.00-01-N
Samtec
FFSD-05-D-02.00-01-N by Samtec is a UL approved stranded flat cable with tin conductor finish and PVC insulation. It operates b/w -40 to 105°C, has 10 conductors, each with a cross-section area of 0.0509 mm2. Ideal for high reliability applications requiring a rated current of 2.3A.
M22759/11-22-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Diameter: 1.245 mm; Cross Section Area: .326 mm2;
AA59569R36T0375
Allied Wire & Cable
WIRE AND CABLE; Shielding: YES; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Conductor Material: TINNED COPPER; MIL Conformity: YES; IEC Conformity: NO;
45-389
Gc Electronics
CABLE ASSEMBLY; Connector Side-1: DB9 FEMALE; Connector Side-2: DB9 FEMALE; Shielding: NO; No. of Conductors: 7; Wire Gauge (AWG): 28;
5010/15CBK199
Alpha Wire
Wires and Cables;
313006-01
Qualtek Electronics
313006-01 by Qualtek Electronics is a POWER CABLE with 18 AWG wire gauge, rated for 125V and 10A. It features IEC60320 C13 to NEMA 5-15P connectors, suitable for electrical applications requiring up to 60°C operating temperature. Approved by CUL and UL, it's ideal for various electrical wiring setups.
IDSD-20-D-06.00-G-R
CABLE ASSEMBLY; Rated Current: 3.4 A; Shielding: NO; Stranding: 7X36; Construction: STRANDED; Maximum Operating Temperature: 105 Cel;
3365/10-100SF
3m Electronic Products Division
3m Electronic Products Division's 3365/10-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 30.48mm. Ideal for electrical applications requiring flexibility and durability.
Tri-star Electronics International
WIRE AND CABLE; Shielding: YES; Construction: STRANDED; Insulator Material: PTFE; MIL Conformity: YES; Conductor Finish: SILVER;
M16878/6BDE-9
Carlisle Interconnect Technologies
M16878/6BDE-9 by Carlisle Interconnect Technologies is a MIL-approved stranded wire with silver finish, PTFE insulation, and copper conductor. It operates b/w -55 to 200 °C and has a resistance of 0.126 ohm. Ideal for flexible cord and fixture wire applications due to its construction and rated voltage of 250 V.
152661034
Molex
Molex 152661034 is a FLAT FLEXIBLE CABLE with 33 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for various electrical wiring applications. Length of 0.076mm provides flexibility in installations.
XS2W-D421-G81-SA
Omron
CTL3VGA-250
Infinite Electronics International
2451320630
Molex 2451320630 wire is UL approved with 300V rating, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for secure connections in electrical setups.
DCPLUG-P1J-R7B
Mean Well Enterprises
M16878/4BJE-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Additional Features: CHEMICAL/FLAME/MOISTURE RESISTANT, STANDARD: MIL-W-16878/4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
55A0111-22-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Resistance: .053 ohm; Wire Gauge (AWG): 22; No. of Conductors: 1;
55A0111-20-0
TE Connectivity 55A0111-20-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring copper alloy conductor with tin finish and 19X32 stranding, it operates b/w -65 to 150 °C. Ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.
55A0111-22-0
TE Connectivity's 55A0111-22-0 is a stranded electrical wire with a rated voltage of 600V and max operating temperature of 150°C. It is constructed with tin-finished copper alloy conductor and has a wire gauge of 22 AWG. This flexible cord and fixture wire is commonly used in applications requiring CSA, CAA, MIL, and UL approvals.
55A0111-22-97
TE Connectivity's 55A0111-22-97 cable is a stranded wire with tin finish, rated at 600V. With a conductor made of copper alloy and 19X34 stranding, it operates b/w -65 to 150 °C. Ideal for general purpose applications, this flexible cord has a diameter of 1.09mm and is suitable for lightweight use.
55A0111-28-3
TE Connectivity's 55A0111-28-3 wire is a stranded copper alloy cable with 28 AWG and rated for 600V. With a temperature range of -65 to 150 °C, it is ideal for general purpose and lightweight applications like flexible cords and fixtures.
55A0121-22-2/6
TE Connectivity's 55A0121-22-2/6 cable is a stranded wire with 600V rating, TIN finish, and 22 AWG size. Ideal for general purpose applications, it has a temperature range of -65 to 150°C. This flexible cord is lightweight and suitable for various electrical needs.
55A0111-20-9
TE Connectivity's 55A0111-20-9 wire is a CSA, CAA, MIL, UL approved stranded cable with a rated voltage of 600V. Constructed with tin finish copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its 19X32 stranding and resistance of 0.032 ohm.
55A0111-16-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -65 Cel; Construction: STRANDED; Resistance: .016 ohm;
55A0111-24-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Cable Types: SPEC 55; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 24 AWG;
55A0111-22-98
TE Connectivity's 55A0111-22-98 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 22 AWG, this flexible cord and fixture wire has a diameter of 1.09mm and stranding of 19X34 for versatile use.
55A0111-12-0
TE Connectivity's 55A0111-12-0 cable is a stranded wire with 600V rating, TIN finish, and 2.98mm² cross-section area. Ideal for general purpose applications, it operates b/w -65°C to 150°C temperatures and features copper alloy conductor material.
55A0111-24-90
TE Connectivity's 55A0111-24-90 wire is a stranded copper alloy cable with tin finish, rated for 600V. With a diameter of 0.94mm and 19X36 stranding, it operates b/w -65 to 150°C. Ideal for general purpose applications, this flexible cord and fixture wire is lightweight and has a cross-sectional area of 0.24 mm2.
55A0111-22-91
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Cross Section Area: .38 mm2; No. of Conductors: 1; Cable Types: SPEC 55;
55A0111-26-90
TE Connectivity's 55A0111-26-90 wire is stranded with tin finish, rated for 600V. With a conductor made of copper alloy, it operates b/w -65 to 150 °C and has a diameter of 0.81mm. Ideal for general purpose and lightweight applications, this flexible cord and fixture wire is commonly used in SPEC 55 cables.
55A0111-22-92
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Stranding: 19X34; Cross Section Area: .38 mm2; Maximum Operating Temperature: 150 Cel;
55A0111-22-96
TE Connectivity's 55A0111-22-96 is a stranded electrical wire with a rated voltage of 600V and conductor finish of TIN. It is used for general purpose applications, lightweight, and has a max operating temperature of 150°C.
55A0111-24-0
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Wire Size: 24 AWG; No. of Conductors: 1; Conductor Material: COPPER ALLOY;
55A0111-28-0
TE Connectivity's 55A0111-28-0 is a stranded electrical wire with 600V rating, TIN finish, and copper alloy conductor. With a temperature range of -65 to 150°C, it is ideal for flexible cord and fixture wire applications requiring 28 AWG wires.
55A0111-22-94
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Cross Section Area: .38 mm2; Wire Gauge (AWG): 22; Construction: STRANDED;
55A0111-22-95
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 22 AWG; Application: GENERAL PURPOSE, LIGHTWEIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved