Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 2311774-1 D-Sub Connector features Matte Tin finish, Glass Filled Polybutylene Terephthalate insulator, and 3 loaded rows. Ideal for board mounting with a temperature range of -55 to 85°C, it has a total of 15 contacts and is rated at 3A for signal current.
Median Price
$7.080
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$4.590
100+ parts
-
1k+ parts
10k+ parts
Arrow
$4.597
$4.461
$4.328
$4.285
Farnell
$5.040
$4.490
$4.310
TE Connectivity
$6.820
$5.280
$4.880
RS Americas
Newark
$7.890
$7.140
Mouser Electronics
$8.480
$6.240
$5.860
Chip1Stop
$9.530
$4.690
$4.510
DigiKey
$9.670
$7.036
$6.201
$5.905
Element14
$11.560
$8.420
$7.880
Powell Electronics
$19.512
$11.707
Verical
Future Electronics
$5.020
$4.860
TTI Europe
Master Electronics
$3.854
$3.796
Vyrian
$4.050
Digiode
$5.377
VNN
Bristol Electronics
IBS Electronics
$7.307
$7.237
NAC Semi
$9.640
$8.760
Nova Conductors
Atlantic Semiconductor
Corphita
$5.094
Continental Prestige Electronics
$6.500
$5.170
Allen Electronics Distributors
$6.950
Authorized Procurement Solutions
Argo Parts USA
GreenTree Electronics
Glotronic Ltd.
Aranea Global
Perfect Parts
Matte tin finish with nickel barrier provides excellent corrosion resistance and ensures reliable electrical contact over time.
Glass-filled polybutylene terephthalate offers high strength and durability, making the connector suitable for rugged applications.
Three rows of contacts allow for a higher number of connections, increasing versatility and functionality of the connector.
With a high maximum operating temperature, this connector can withstand a wide range of environmental conditions without performance degradation.
Steel shell construction provides robustness and mechanical strength, ensuring the connector can withstand rough handling and environments.
D-Sub Connectors 2311774-1 attributes and parameters. Explore more D-Sub Connectors devices from TE Connectivity
Board Mounting Option:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Shell Finish:
Shell Material:
Shell Size:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2311774-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Drawings Document Clarification 16/May/2019 Multiple Drawings Document Clarification 22/May/2018
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Renesas Electronics
661-037-364-034
Edac
The Edac 661-037-364-034 is a D-sub connector with a mating contact pitch of 0.109 inches, insulation resistance of 5G ohm, and a dielectric withstand voltage of 1400VAC. It is commonly used in applications requiring reliable signal transmission and can be mounted on a board using the split board lock option.
M24308/24-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 9; Mating Contact Finish: NOT SPECIFIED;
M83513/04B04N
Bel Fuse
Bel Fuse's M83513/04B04N D-Sub Connector features 15 contacts, gold termination finish, and glass-filled polyethylene insulator. With a 600VAC dielectric voltage rating, it is ideal for military applications requiring reliable signal transmission in harsh environments. Operating temperature ranges from -55 to 125°C make it suitable for diverse industrial settings.
M83513/03-A03C
Airborn
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mixed Contacts: NO;
M24308/4-4F
TE Connectivity's M24308/4-4F D-Sub Connector features 37 contacts, rated at 7.5A for signal current. With a body size of 2.744" x 0.509" x 0.414", it operates b/w -55°C to 125°C. Ideal for military applications due to MIL-C-24308 reliability standards and steel shell material with cadmium finish.
M83513/03-A04N
Defense Logistics Agency
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
M24308/4-3F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Shell Finish: CHROMATE; Contact Material: BRASS;
DDMM-36W4S
D SUBMINIATURE CONNECTOR; Contact Gender: FEMALE; Termination Type: SOLDER; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e4; Empty Shell: NO;
M83513/04-D03N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Reference Standard: MIL;
M24308/2-2F
D Type Connectors; Option: GENERAL PURPOSE; Reliability: MIL-C-24308; Contact Gender: FEMALE; Contact Design: PREASSEM CONN; Insulation Resistance: 1000000000 ohm;
DA3W3SA00LF
Amphenol Communications Solutions
DA3W3SA00LF by Amphenol is a D-Sub Connector with 3 contacts, made of steel shell finish in copper tin. It features insulation resistance of 5000000000 ohm and operates b/w -55 to 125 °C. Ideal for applications requiring a female contact style, such as industrial machinery and telecommunications equipment.
205210-3
TE Connectivity's 205210-3 D-Sub Connector features EMI shielding, UL 94V-0 flammability rating, and crimp termination. With a total of 37 contacts, it is suitable for commercial applications with operating temperatures ranging from -55°C to 105°C. The connector is designed for cable and panel mounting, offering reliable performance in various electronic systems.
M24308/24-5F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; No. of Rows Loaded: 3;
M24308/23-3F
TE Connectivity's M24308/23-3F D-Sub Connector features 25 contacts, rated at 5A. With a body size of 2.103" x 0.509" x 0.264", it operates b/w -55°C to 125°C. Ideal for board mounting applications with staggered PCB contact pattern and solder termination.
83612-9020
Molex
The Molex 83612-9020 D-Sub Connector features a mating contact pitch of 0.05", dielectric voltage of 600VAC, and UL flammability rating of 94V-0. Ideal for commercial applications, this connector has a total of 15 contacts, right-angle mounting style, and solder termination for reliable signal transmission.
8-1532021-1
TE Connectivity's 8-1532021-1 D Microminiature Connector features 21 contacts with preassembled design and black insulator. Suitable for commercial use, it has a polyphenylene sulfide insulator material and 50u plating thickness. Ideal for cable mounting with stranded wire termination, this male connector is designed for 26 AWG wires in a locking shell style.
M24308/6-3P
Itt Cannon
ITT Cannon's M24308/6-3P D-Sub Connector has 25 contacts, rated at 5A signal current. With a body size of 2.103" x 0.509" x 0.375", it operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications due to its stainless steel shell and crimp termination.
M24308/4-13F
TE Connectivity's M24308/4-13F D-Sub Connector has a temperature range of -55 to 125°C. With 44 contacts, it supports a signal current of 5A. Ideal for cable mounting, this connector features a steel shell with cadmium plating, suitable for various applications.
Hi Rel Connectors
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Filter Feature: NO;
M24308/23-33F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO; PCB Contact Pattern: STAGGERED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2311765-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Shell Finish: NICKEL; Mating Contact Finish: NOT SPECIFIED;
2311763-3
TE Connectivity's 2311763-3 D-Sub Connector features glass-filled polybutylene terephthalate insulator, 15 contacts, and 3A signal current rating. Ideal for board mounting with right-angle style, it operates b/w -55 to 85°C. Suitable for applications requiring reliable female receptacle connectors with solder termination.
2311770-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Total No. of Contacts: 44;
2311776-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO; Insulation Resistance: 1000000000 ohm;
2311773-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Body Length: 2.72 inch;
2311797
Phoenix Contact
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; MIL Conformity: NO; Total No. of Contacts: 9;
2311768-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Mounting Type: BOARD; No. of Rows Loaded: 3;
2311770-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 3; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Terminal Pitch (mm): 2.29;
2311763-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 3; Mains Connector Rating: 3A; Board Mounting Option: BOARD LOCK;
2311763-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; Maximum Operating Temperature (Cel): 85;
2311768-2
TE Connectivity D-Sub Connector 2311768-2 with 26 contacts, rated at 3A signal current. Features glass-filled PBT insulator, nickel finish, and steel shell material. Ideal for board mounting applications with right-angle receptacle style and screwlocks mounting option.
2311766-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Termination Type: SOLDER; No. of Ports: 1; EMI Shielded: NO; Contact Style: RND PIN-SKT;
2311767-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Insulator Color: BLACK; Filter Feature: NO; Mixed Contacts: NO; Mounting Type: BOARD;
2311586-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED; Rated Current - Signal: 3 A; Minimum Operating Temperature: -55 Cel;
2311762-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Terminal Pitch (mm): 2.77; IEC Conformity: NO; EMI Shielded: NO; MIL Conformity: NO;
2311765-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Option-1: #4-40; Contact Material: NOT SPECIFIED;
2311586-3
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.077; Terminal Pitch (mm): 2.29; Mounting Type: BOARD;
2311771-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.077; Mains Connector Rating: 3A; Empty Shell: YES;
2311586-5
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Termination Contact Finish: NOT APPLICABLE; Minimum Operating Temperature: -55 Cel; DIN Conformance: NO; Rated Current - Signal: 3 A;
2311775-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; EMI Shielded: NO; Mounting Option-2: SCREWLOCKS; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved