Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
Median Price
$1.900
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$1.100
100+ parts
$1.060
1k+ parts
-
10k+ parts
Heilind Electronics
$1.147
$0.921
$0.907
Interstate Connecting
$1.288
$1.048
$1.019
Master Electronics
$1.701
$1.114
$0.888
$0.881
Mouser Electronics
$1.490
$1.170
$1.090
Farnell
$1.960
$1.240
$0.952
RS Americas
$1.550
$1.370
Chip1Stop
$2.030
Distrelec
$2.114
Newark
$2.360
$1.580
$1.450
TE Connectivity
$2.490
$1.800
RS (Exports)
$3.140
$2.560
$2.420
DigiKey
$3.180
$2.296
$1.982
$1.798
TTI
$0.970
$0.950
Arrow
$1.346
Verical
$1.434
NEP Electronics
$1.190
Digiode
Nova Conductors
$1.195
DF Sales Co.
Maritex
$3.035
$1.681
$1.284
Bristol Electronics
Atlantic Semiconductor
IBS Electronics
$2.063
$1.826
$1.344
NAC Semi
VNN
Electro Sonic
$1.062
$0.932
$0.886
Vyrian
Rapid Electronics
$1.551
TME
$2.680
$2.080
R&J Components
Lantek
EMSNET
Cyclops Electronics Ltd
Powertech Controls
American Connector Supply Corp
Semicontronic
$0.880
$0.858
$0.854
Corphita
$1.032
Argo Parts USA
Continental Prestige Electronics
$1.870
$1.290
$1.020
Aztec Data Supply Inc.
$8.996
Perfect Parts
Eastek
Assy Fe
GreenTree Electronics
Netroflash
$1.171
$1.135
$1.111
D-Sub Connectors 205204-8 attributes and parameters. Explore more D-Sub Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Shell Size:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
205204-8 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Multiple Devices Location 05/Jan/2017
PCN Packaging - Mult Devs - package material chg 30/OCT/2020
PCN Other - Multiple Devices Material 01/May/2014
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Vishay Sprague
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Lite-on Semiconductor
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
261
Deltrol Controls
Other Relays;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Hitano Enterprise
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
M83513/03-G03N
TE Connectivity's M83513/03-G03N D-Sub Connector features 51 contacts, 3A signal current rating, and MIL standard compliance. With a durable design for 500 cycles, it is ideal for cable mounting applications requiring male contact gender and crimp termination. The connector offers high insulation resistance of 5Gohm and operates in temperatures ranging from -55 to 125°C.
205210-3
TE Connectivity's 205210-3 D-Sub Connector features EMI shielding, UL 94V-0 flammability rating, and crimp termination. With a total of 37 contacts, it is suitable for commercial applications with operating temperatures ranging from -55°C to 105°C. The connector is designed for cable and panel mounting, offering reliable performance in various electronic systems.
Cristek Interconnects
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mounting Option-1: HOLE .094;
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
628-037-371-276
Edac
Edac D-Sub Connector 628-037-371-276 has 37 contacts, rated at 5A signal current. With insulation resistance of 1Gohm and dielectric voltage withstand of 1414VAC, it operates b/w -55 to 85°C. Ideal for EIA RS-232 applications with UL94V-0 flammability rating and solder termination.
M83513/01CN
Bel Fuse
Bel Fuse's M83513/01CN is a D-Sub Connector with 21 contacts and a mating contact pitch of 0.05". It has a body length of 1.075", insulation resistance of 5GΩ, and can withstand voltages up to 600VAC. This connector is commonly used in military applications due to its MIL conformity and reliability (MIL-C-83513).
M24308/2-14F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: CRIMP; IEC Conformity: NO;
M83513/03-A03C
Defense Logistics Agency
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mixed Contacts: NO;
M24308/4-4F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Size: 4/C; Body or Shell Style: PLUG; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED;
M83513/02-CC
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.043;
M24308/4-444F
Amphenol
Amphenol's M24308/4-444F D-Sub Connector has 78 contacts, 4 rows, and operates b/w -55°C to 125°C. With a rated current of 5A, it features a steel shell, glass-filled polyester insulator, and male contact gender. Ideal for cable mounting applications with durability up to 500 cycles.
D25P24A4GV00LF
Amphenol Communications Solutions
D25P24A4GV00LF by Amphenol is a D-Sub connector with 25 contacts, male gender, and straight mounting style. It features a body length of 2.07", insulation resistance of 5G ohm, and rated current of 5A. Ideal for board and panel mounting applications requiring reliable signal connections in temperatures ranging from -55°C to 125°C.
M24308/24-4F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-24308; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1250VAC; PCB Contact Pattern: STAGGERED;
M24308/2-2F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mating Contact Finish: NOT SPECIFIED;
M24308/3-2F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; IEC Conformity: NO; Filter Feature: NO;
M24308/3-3F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mounting Option-1: HOLE .12;
M83513/04-B04N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Total No. of Contacts: 15;
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Shell Size: 2/A; DIN Conformance: NO;
M24308/2-3Z
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: HOLE .12; MIL Conformity: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
205203-3
TE Connectivity 205203-3 D-Sub Connector with 1.213" body length, EMI shielding, and polyethylene insulator is ideal for cable mounting applications. Features include 9 contacts, UL-rated insulation resistance of 500MΩ, and operating temperature range from -55 to 105°C.
205203-8
TE Connectivity 205203-8 D-Sub Connector with 1.213" body length, EMI shielding, and polyethylene insulator is ideal for commercial applications. Rated at 105°C max operating temp, it features copper alloy contacts and UL94V-0 flammability code. Suitable for cable mounting with crimp termination, this connector has a total of 9 contacts in a single row configuration.
205204-4
TE Connectivity 205204-4 D-Sub Connector features EMI shielding, insulation resistance of 500M ohm, and UL94V-0 flammability rating. Ideal for commercial applications with operating temp range -55 to 105°C, it has a total of 9 contacts and supports wire sizes from 28 to 18 AWG.
205206-3
The TE Connectivity 205206-3 D-Sub Connector features EMI shielding, polyethylene insulator, and steel shell material. With 15 contacts in a 2-row configuration, it is suitable for commercial applications requiring reliable connections. Operating temperature range from -55°C to 105°C makes it versatile for various environments.
205204-9
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: PLUG;
205209-2
TE Connectivity 205209-2 D-Sub Connector has 37 contacts, insulation resistance of 5G ohm, and EMI shielding. With a body length of 2.729", it is used in commercial applications for signal currents up to 3.1A at temperatures ranging from -55 to 105°C.
205205-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: YES; Reference Standard: UL;
205204-1
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; IEC Conformity: NO; MIL Conformity: NO;
TE Connectivity 205204-1 D-Sub Connector features 9 contacts, GLASS FILLED POLYAMIDE insulator, and ZINC shell finish. Ideal for commercial applications, it has a body size of 1.213" x 0.494" x 0.432", UL94V-0 flammability rating, and CRIMP termination type.
205203-1
TE Connectivity 205203-1 D-Sub Connector features 9 contacts, GLASS FILLED POLYAMIDE insulator, and ZINC/YELLOW CHROMATE shell finish. With a rated current of 3.7A, it is ideal for commercial applications requiring a reliable connector with UL and CSA standards compliance. Operating temperature range from -55 to 105°C makes it suitable for various environments.
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: ZINC; Contact Material: NOT SPECIFIED; Additional Features: AMPLIMITE;
205207-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Shell Size: 3/B;
TE Connectivity's 205207-1 D-Sub Connector has a body length of 2.088", insulation resistance of 500MΩ, and a dielectric withstand voltage of 1000VAC. It is commonly used in cable mounting applications and offers reliable performance in commercial settings.
205205-7
The TE Connectivity 205205-7 D-Sub Connector features EMI shielding, polyethylene insulator, and UL flammability rating. With a total of 15 contacts, it is suitable for commercial applications requiring a rated current of 3.1A and operating temperatures ranging from -55 to 105°C.
205206-9
TE Connectivity 205206-9 D-Sub Connector features EMI shielding, UL 94V-0 flammability rating, and 15 contacts. Ideal for commercial applications with operating temperatures from -55 to 105°C. Dimensions: 1.541" L x 0.494" W x 0.432" D.
205209-7
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Shell Finish: ZINC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
205210-8
The TE Connectivity 205210-8 D-Sub Connector features EMI shielding, polyethylene insulator, and steel shell material. With a total of 37 contacts, it is suitable for commercial applications with an operating temperature range from -55 to 105°C. This connector has a male contact gender and is designed for cable mounting with crimp termination.
205209-1
TE Connectivity's 205209-1 D-Sub Connector features 37 contacts, 2 rows, and a body length of 2.729". With insulation resistance of 500MΩ and dielectric voltage withstand of 1000VAC, it is ideal for cable and panel mounting applications requiring high-quality female connectors.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved