Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HEAT SHRINK BOOT; Maximum Operating Temperature: 105 Cel; Construction: DUAL WALL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -30 Cel;
Median Price
$25.500
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$25.490
100+ parts
$22.680
1k+ parts
-
10k+ parts
Master Electronics
$22.690
$22.350
Verical
$30.380
$29.340
Bristol Electronics
$24.000
Nova Conductors
$24.177
IBS Electronics
$35.764
$31.823
$31.430
Vyrian
VNN
TME
$37.350
AZTECH Wire
$20.960
Heat Shrinks 202K163-100/184-0 attributes and parameters. Explore more Heat Shrinks devices from TE Connectivity
Connector Accessory Type:
Construction:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358M
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diotec Semiconductor Ag
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SO63-2-9036-18
TE Connectivity
TE Connectivity SO63-2-9036-18 heat shrink features single wall construction with polyvinylidene fluoride jacket. Solder terminal type, 150°C max operating temp, 2.65mm diameter, and supports up to 0 AWG wire size. Ideal for electrical insulation in various applications.
S01-03-RCS918
HEAT SHRINK SOLDER SLEEVE; Terminal Type: SOLDER; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Diameter: 4.3 mm;
M23053/5-102-9
Defense Logistics Agency
HEAT SHRINK TUBE; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Construction: SINGLE WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN;
B-013-10
HEAT SHRINK SOLDER SLEEVE; Wire Gauge (AWG): 22; Terminal Type: SOLDER; Maximum Operating Temperature: 200 Cel; Maximum Wire Size: 22 AWG;
MT1000-3/32-0-SP
HEAT SHRINK TUBE; Jacket Material: FLUOROPOLYMER; Construction: SINGLE WALL;
TMS-SCE-3/8-2.0-4
HEAT SHRINK MARKER SLEEVE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Jacket Material: POLYOLEFIN; Wire Gauge (AWG): 0; Maximum Operating Temperature: 135 Cel;
M83519/2-9
HEAT SHRINK SOLDER SLEEVE; Jacket Material: POLYVINYLIDENE FLUORIDE;
202K121-25-01/225-0
TE Connectivity's 202K121-25-01/225-0 heat shrink features dual wall construction with elastomer jacket material. It has a max operating temp of 150°C and min cable entry of 5.6". Ideal for applications requiring durable insulation in extreme temperature environments.
HSTTV75-T
Panduit
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL;
RNF-100-1/8-WH-SP
HEAT SHRINK TUBE; Construction: SINGLE WALL; Jacket Material: POLYOLEFIN; Additional Features: APPROVAL: VDE;
SO63-2-9030
TE Connectivity's SO63-2-9030 heat shrink features a single wall construction with crosslinked modified PVDF jacket material. With a max operating temp of 150°C, it has a diameter of 2.65mm and supports up to 0 AWG wire size. Ideal for solder terminals in various electrical applications.
NB14134001
HEAT SHRINK TUBE; Maximum Operating Temperature: 135 Cel; Maximum Wire Size: 0 AWG; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Additional Features: REFERENCE STANDARD: CSA; UL; Wire Gauge (AWG): 0;
342A024-25/225-0
TE Connectivity's 342A024-25/225-0 is a dual wall heat shrink with elastomer jacket material. It has a max operating temp of 150°C and min of -75°C, suitable for wires up to 0 AWG. Ideal for applications requiring durable insulation in extreme temperature environments.
222D921-25/225-0
TE Connectivity's 222D921-25/225-0 is an ELASTOMER heat shrink with a min cable entry of 2.1 inch and max operating temperature of 150°C. It is suitable for applications requiring protection and insulation for cables up to 0 AWG, with a max cable entry of 4.6 inch.
ATUM-6/2-0-STK
Commscope
HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Jacket Material: POLYOLEFIN; Construction: DUAL WALL; Maximum Operating Temperature: 110 Cel;
M23053/5-108-0
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Maximum Wire Size: 0 AWG; Construction: SINGLE WALL; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel;
M83519/2-7
HEAT SHRINK TUBE; Jacket Material: POLYVIMYLIDENE FLUORIDE;
TMS-SCE-3/8-2.0-9
HEAT SHRINK MARKER SLEEVE; Maximum Wire Size: 0 AWG; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 135 Cel;
FIT-221-1/4CL005
Alpha Wire
HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN;
NB13434001
HEAT SHRINK TUBE; Maximum Operating Temperature: 135 Cel; Jacket Material: POLYOLEFIN; Additional Features: REFERENCE STANDARD: VDE; Construction: SINGLE WALL; Wire Gauge (AWG): 0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
202K132-25/225-0
TE Connectivity's 202K132-25/225-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and accommodates up to 0 AWG wire. Ideal for applications requiring a min cable entry of 5.9" and max of 15".
202K121-25/225-0
TE Connectivity's 202K121-25/225-0 heat shrink features ELASTOMER jacket material, -75 to 150 °C operating temp range, and fits cables up to 0 AWG. Ideal for applications requiring a min cable entry of 5.6 inch and max of 14 inch.
202K132-25-0
TE Connectivity's 202K132-25-0 heat shrink features single wall construction with elastomer jacket material. It has a max operating temp of 150°C and min cable entry of 5.9". Ideal for applications requiring -75 to 150°C range, accommodating up to 0 AWG wire size in a 15" cable entry space.
202K1322501-225-0
TE Connectivity's 202K1322501-225-0 heat shrink features dual wall construction with elastomer jacket material. It offers a wide temperature range from -75°C to 150°C, accommodating wire sizes up to 0 AWG. Ideal for applications requiring a min cable entry of 5.9" and max of 15".
202K121-25/225-0-CS6939
HEAT SHRINK BOOT; Construction: DUAL WALL; Jacket Material: ELASTOMER;
202K132-25-01/86-0
TE Connectivity's 202K132-25-01/86-0 heat shrink features dual wall construction with elastomer jacket material. It has a min cable entry of 5.9" and can withstand temperatures from -75°C to 150°C. Ideal for applications requiring protection and insulation for cables up to 0 AWG size with a max cable entry of 15".
202K121-25-01/86-0
TE Connectivity's 202K121-25-01/86-0 heat shrink features ELASTOMER jacket material, -75 to 150°C operating temp range, and fits cables up to 14" with a min entry of 5.6". Ideal for electrical insulation in various applications.
202K121-25-0
TE Connectivity's 202K121-25-0 heat shrink features single wall construction with elastomer jacket material. It has a max operating temp of 150°C and min operating temp of -75°C. Ideal for applications requiring a min cable entry of 5.6" and accommodating up to 0 AWG wire size.
202K142-25-01/86-0
TE Connectivity's 202K142-25-01/86-0 heat shrink features ELASTOMER jacket material, -75 to 150°C temp range, and fits cables up to 17" with 0 AWG wire size. Ideal for electrical insulation in various applications.
202K142-25/225-0
TE Connectivity's 202K142-25/225-0 heat shrink features ELASTOMER jacket material, -75 to 150 °C operating temp range, and fits cables up to 0 AWG. Ideal for applications requiring a min cable entry of 7.1 inches and max of 17 inches.
202K142-25-0
HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Minimum Cable Entry: 7.1 inch; Construction: SINGLE WALL; Jacket Material: ELASTOMER;
202K121-25-01-0
HEAT SHRINK BOOT; Minimum Cable Entry: 5.6 inch; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Maximum Cable Entry: 14 inch;
202K132-25-G03/86-0
HEAT SHRINK BOOT; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -75 Cel; Jacket Material: ELASTOMER;
202K142-25-01-0
HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Minimum Cable Entry: 7.1 inch; Maximum Operating Temperature: 150 Cel; Jacket Material: ELASTOMER; Material: ELASTOMER;
202K142-25-01/225-0
HEAT SHRINK BOOT; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG; Minimum Cable Entry: 7.1 inch; Maximum Operating Temperature: 150 Cel;
202K142-25-00-0
HEAT SHRINK BOOT; Material: ELASTOMER; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
202K121-25-01/42-0
HEAT SHRINK BOOT; Jacket Material: ELASTOMER; Material: ELASTOMER; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
202K132-25-00-0
HEAT SHRINK BOOT; Jacket Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG;
202K153-25/225-0
TE Connectivity's 202K153-25/225-0 heat shrink features dual wall construction with elastomer jacket material. It has a max operating temp of 150°C and min operating temp of -75°C, suitable for cables up to 0 AWG size. Ideal for applications requiring a min cable entry of 8.4 inches and max cable entry of 20 inches.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved