Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 30u;
Median Price
$2.530
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.290
100+ parts
$2.040
1k+ parts
$1.560
10k+ parts
$1.460
DigiKey
$2.770
-
Digiode
$2.004
Vyrian
$2.110
Corphita
$1.899
Perfect Parts
Authorized Procurement Solutions
Assy Fe
Power Connectors 2-1445098-8 attributes and parameters. Explore more Power Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2-1445098-8 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Micro Commercial Components
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Rectron
428192223
Molex
428192223 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of glass-filled polyamide46, is suitable for board mounting and has a rated current of 50A.
42816-0412
The Molex 42816-0412 is a rectangular power connector with 4 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC, it has an insulation resistance of 1G ohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring high reliability, this connector uses crimp termination on cables with a locking mounting option.
105313-2102
105313-2102 by Molex is a RECTANGULAR POWER CONNECTOR with 2 contacts, TIN OVER NICKEL finish. Made of LIQUID CRYSTAL POLYMER, it's UL 94V-0 rated for BOARD mounting. Ideal for applications requiring reliable MALE solder connections in power systems.
1648132-1
TE Connectivity
TE Connectivity's 1648132-1 is a rectangular power connector with 40 contacts, rated at 250V. Made of polybutylene terephthalate, it operates b/w -40 to 105°C. Ideal for applications requiring male connectors in black insulator color and UL flammability rating of 94V-0.
1-1123824-1
TE Connectivity 1-1123824-1 is a RECTANGULAR POWER CONNECTOR with rated voltage of 250V and current of 8A. It has POLYAMIDE66 insulator, BRASS shell material, and operates b/w -25 to 105 °C. Ideal for board mounting applications requiring reliable power connections.
66484-001
Dupont Electronics
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Insulator Material: POLYAMIDE; Additional Features: COMPATIBLE CONTACTS: 76146-001; 76146-003; 76148-001; 76148-003; 76150-001;
15-06-0101
Molex 15-06-0101 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1000000000 ohm. Ideal for PANEL mounting in commercial applications due to its reliability and UL certification.
DF22R-2P-7.92DSA(53)
Hirose Electric
DF22R-2P-7.92DSA(53) by Hirose Electric is a POWER CONNECTOR with GLASS FILLED POLYAMIDE insulator, 2 contacts, and 0.678" x 0.49" x 0.713" dimensions. It operates b/w -55 to 85°C, UL94V-0 rated, suitable for BOARD mounting with SOLDER termination.
5-5223955-2
TE Connectivity 5-5223955-2 is a rectangular power connector with 3 contacts, rated at 250V and 16A. It features polyethylene insulator, polyester shell material, and press-fit termination. Ideal for board mounting applications in commercial settings with operating temperatures from -55 to 125°C.
IPBD-02-D-K
Samtec
Samtec's IPBD-02-D-K is a rectangular power connector with 4 contacts, made of POLYAMIDE. Measuring 0.37" x 0.478" x 0.773", it has UL 94V-2 flammability rating and female SQ PIN-SKT contact style. Ideal for cable mounting applications requiring reliable wire termination.
B2P3-VH(LF)(SN)
J S T Mfg
B2P3-VH(LF)(SN) by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 7A. It features BRASS contacts with Tin finish and POLYAMIDE66 insulator material. Ideal for board mounting applications, operating b/w -25 to 85°C.
3-794630-4
TE Connectivity 3-794630-4 is a power connector with 0.118" mating contact pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, featuring POLYAMIDE insulation material and UL94V-0 flammability rating. With a compact body size of 0.27"x.364", it offers reliable performance in commercial settings.
172310-1102
Molex 172310-1102 is a RECTANGULAR POWER CONNECTOR with LIQUID CRYSTAL POLYMER insulator. Featuring 2 contacts, it's UL 94V-0 rated for board mounting with solder termination. Ideal for power applications requiring reliable male connectors.
43650-0424
The Molex 43650-0424 is a rectangular power connector with bright tin finish and glass-filled liquid crystal polymer insulator. Featuring brass contacts, it has 4 male contacts and UL 94V-0 flammability rating. Ideal for board mounting in various power applications.
39-30-1041
Molex 39-30-1041 is a rectangular power connector with 4 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1000000000 ohm, and operates b/w -40 to 105 °C. Ideal for board mounting applications in commercial settings due to its durability and reliability.
178496-1
TE Connectivity 178496-1 is a RECTANGULAR POWER CONNECTOR with 3 contacts, rated at 11A. Featuring GLASS FILLED POLYAMIDE66 shell material, it has an insulation resistance of 100MΩ and operates b/w -30 to 105°C. Ideal for board mounting applications requiring a durable connector with a mating contact pitch of 0.156 inches.
36804-0001
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 36804; Contact Material: NOT SPECIFIED;
50-84-1060
The Molex 50-84-1060 is a rectangular power connector with 6 contacts, rated at 11A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
1445957-3
TE Connectivity's 1445957-3 is a RECTANGULAR POWER CONNECTOR with POLYCARBONATE insulator. Rated for 600V, it operates b/w -20 to 105 °C. Suitable for commercial applications, it accommodates wire sizes from 10 AWG to 20 AWG in STRANDED cables.
76825-0002
Molex 76825-0002 is a RECTANGULAR POWER CONNECTOR with 2 contacts, Tin finish, and LIQUID CRYSTAL POLYMER insulator. Ideal for BOARD mounting applications requiring MALE contact gender and UL 94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved