Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1SNK905310R0000 JUMPER ITEM features POLYAMIDE insulator, rated for 32A current at 600V AC/DC. With CSA, IEC, and UL approvals, it operates b/w -55°C to 110°C. Ideal for connecting wires up to 0 AWG in various assembly applications.
Median Price
$7.033
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Peerless Electronics
1+ parts
$3.500
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$3.950
Standard Electric Supply Co.
$3.980
Interstate Connecting
$4.156
Arrow
$2.751
$2.719
RS Americas
$7.550
$5.440
Newark
$9.040
$5.270
$4.370
$4.180
DigiKey
$9.100
$5.119
$4.236
$4.064
Farnell
$9.520
$5.520
$5.210
Element14
$9.760
Powell Electronics
$13.601
$7.897
$7.140
Verical
$4.176
Master Electronics
$5.060
$4.130
TTI Europe
Boersig
Kempston Controls
$3.420
Nova Conductors
$3.650
Galco
$3.800
Quotebeam
$3.990
TME
$8.140
VNN
IBS Electronics
$2.691
$2.600
NAC Semi
$3.230
Bisco
Electro Sonic
$3.150
$2.870
$2.640
Vyrian
Advanced Electronics
$3.561
Argo Parts USA
Netroflash
Continental Prestige Electronics
$3.290
$3.130
Aztec Data Supply Inc.
$4.534
Perfect Parts
Eastek
Having approvals from well-known organizations like CSA, IEC, and UL ensures the product meets high safety and quality standards, making it a reliable choice.
Polyamide is a durable and heat-resistant material, providing excellent insulation properties and ensuring the longevity of the product.
With a high maximum operating temperature of 110°C, this product can withstand elevated temperatures without compromising its performance.
Being rated for a high AC voltage of 600V, this product is suitable for use in various electrical applications where higher voltage levels are required.
The ability to operate at temperatures as low as -55°C makes this product ideal for use in extreme cold conditions without any performance issues.
The designation as a jumper item indicates that this product is designed for interconnecting circuits or components, making it essential for electrical assemblies.
Supporting a maximum wire size of 0 AWG allows for compatibility with a wide range of wire gauges, providing flexibility in connecting various electrical components.
With a rated current of 32A, this product can safely handle moderate electrical currents, making it suitable for a variety of applications without any risk of overheating.
The use of Polyamide as the material of construction offers excellent durability, chemical resistance, and electrical insulation properties, contributing to the overall reliability of the product.
Being rated for a high DC voltage of 600V allows this product to be used in DC electrical systems with confidence, ensuring reliable performance and safety.
Assembly Products 1SNK905310R0000 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Approvals (V):
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Insulator Material:
MIL Conformity:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated AC Voltage:
Rated DC Voltage:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PX0733
Bulgin
CONNECTOR ACCESSORY; Assembly Item Name: CAP ITEM; Usage: PX0847; MIL Conformity: NO; IEC Conformity: NO; Maximum Operating Temperature: 70 Cel;
828905-1
TE Connectivity
TE Connectivity 828905-1 CONTACT features CRIMP terminal type, 0.0866" min cable entry, and -40 to 130°C operating temp. Ideal for STRAIGHT mounting with 0 AWG wire size, it's used in various assembly applications.
13711544
Aptiv
Aptiv 13711544 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.067-0.083 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
9025770000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Assembly Item Name: FERRULE-STRAIGHT; Approvals (V): CSA; GOST; UL;
0462-203-12141
TE Connectivity's 0462-203-12141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 12-14 AWG wires at 25A current. Ideal for SIGNAL applications requiring FEMALE ROUND PIN-SOCKET contacts in STRAIGHT mounting style.
9025760000
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 24 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; MIL Conformity: NO;
DF22A-1416SCFA
Hirose Electric
CONNECTOR ACCESSORY;
16-02-0078
Molex
1011-344-0205
TE Connectivity 1011-344-0205 is a male plug assembly product with max operating temp of 125°C and min of -55°C. It features plastic material, cap item name, and supports wire size up to 0 AWG. Ideal for applications requiring stud mounting option at 0.200".
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
175218-2
TE Connectivity's 175218-2 is a CRIMP terminal with GLASS FILLED POLYESTER insulator. With a rated current of 15A, it supports wire gauge from 20 to 16 AWG. Ideal for POWER AND SIGNAL applications, it features CSA and UL approvals.
282403-1
TE Connectivity's 282403-1 plug housing has a finish thickness of 236.22, crimp terminal type, and operates b/w -40 to 125 °C. Ideal for discrete wire applications, it accommodates wire sizes from 22 to 20 AWG with a rated current of 6A.
1-66100-9
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
590
Keystone Electronics
Keystone Electronics 590 is a male contact with compression style, made of steel. It features right angle mounting and solder terminal type, with a length of 0.12". Ideal for assembly products requiring durable connections in tight spaces.
1-66103-8
TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.
M23053/16-004-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
770904-1
TE Connectivity's 770904-1 is a plug housing with stranded construction and crimp terminal type. It has a rated voltage of 600V and can handle temperatures from -55 to 105 °C. This power contact, made of brass, is suitable for discrete wire applications with cable entry ranging from 0.059 to 0.094 inch.
76823-0321
Molex 76823-0321 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. Ideal for applications requiring 16-14 AWG wire sizes such as 170001 and 171692 assemblies.
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
19200031440
Harting Electronics & Kg
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1SNK900103R0000
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0; Insulator Material: POLYAMIDE; Maximum Wire Size: 0 AWG;
Abb
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
1SNK900618R0000
TERMINAL BLOCK ACCESSORY; Wire Gauge (AWG): 0; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYCARBONATE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel;
1SNK900620R0000
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0;
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Insulator Material: POLYCARBONATE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
1SNK900001R0000
TE Connectivity's 1SNK900001R0000 is a UL-approved terminal block with insulator material POLYAMIDE. It has a wide operating temperature range (-55 to 110 °C) and supports wire sizes up to 0 AWG. Ideal for various assembly applications requiring secure wire connections.
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Approvals (V): UL; MIL Conformity: NO; Maximum Operating Temperature: 110 Cel; Assembly Item Name: END STOP;
1SNK908310R0000
CONNECTOR ACCESSORY; Rated Current: 57 A; Insulator Material: POLYAMIDE; Rated AC Voltage: 600 V; Maximum Operating Temperature: 110 Cel; Rated DC Voltage: 600 V;
CONNECTOR ACCESSORY; Rated Current: 57 A; Maximum Operating Temperature: 110 Cel; Rated AC Voltage: 600 V; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel;
1SNK900101R0000
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel;
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
1SNK908302R0000
CONNECTOR ACCESSORY; Rated Current: 57 A; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0;
TE Connectivity's 1SNK908302R0000, made of POLYAMIDE, operates b/w -55 to 110 °C with a max AC/DC voltage of 600 V. It supports up to 0 AWG wire size and handles a rated current of 57 A. Ideal for various assembly applications requiring high voltage and current capabilities.
1SNK708911R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE;
1SNK150051R0000
TERMINAL BLOCK ACCESSORY; Mounting Style: RIGHT ANGLE; Insulator Material: POLYAMIDE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Mounting Style: RIGHT ANGLE;
1SNK906303R0000
TE Connectivity's 1SNK906303R0000 is an Assembly Product with POLYAMIDE insulator. It operates b/w -55 to 110 °C, rated at 600V AC/DC and handles up to 41A current. Ideal for applications requiring secure wire connections up to 0 AWG size in various industries.
CONNECTOR ACCESSORY; Rated Current: 41 A; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Rated AC Voltage: 600 V; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved