Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1825910-1 is a SPST Keypad Switch with BROWN actuator. Made of NYLON, it has an electrical life of 100000 cycles and operates b/w -35 to 85°C. Ideal for panel mounting applications, it features a max operating force of 0.98N and DC contact current of 0.05A at 24VDC.
Median Price
$0.087
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.150
100+ parts
$0.110
1k+ parts
$0.093
10k+ parts
$0.079
Element14
-
$0.074
Farnell
$0.069
$0.060
Newark
$0.112
$0.095
$0.084
Verical
Nova Conductors
$0.082
Vyrian
VNN
Semicontronic
$0.051
$0.050
$0.049
Netroflash
$0.080
Aztec Data Supply Inc.
$1.779
Continental Prestige Electronics
Robosynatics
$2.117
$1.960
Lucentia Tech
Kepictronics
Assy Fe
Authorized Procurement Solutions
Argo Parts USA
The brown color of the actuator provides a unique and aesthetically pleasing look to the keypad switch, making it stand out.
The nylon housing material ensures durability and long-lasting performance of the keypad switch, making it a reliable choice for various applications.
With a high electrical life of 100000 cycles, this keypad switch is designed to withstand frequent use and is built to last.
The compact body width of 5.99 inches makes the keypad switch suitable for installations where space is limited.
The single-pole, single-throw (SPST) switch function ensures simple on/off operation, making it easy to use for a variety of applications.
The low body height of 3.61 mm allows for a sleek and low-profile design, making it suitable for applications where space is restricted.
With a high maximum operating temperature of 85°C, this keypad switch is suitable for use in a wide range of environments.
The maximum AC contact current of 0.05A allows for efficient power transfer and reliable performance in AC circuits.
The keypad switch can operate in temperatures as low as -35°C, making it suitable for use in cold environments.
The copper alloy end contact material ensures excellent conductivity and reliability in the keypad switch, making it a dependable choice for electrical connections.
Keypad Switches 1825910-1 attributes and parameters. Explore more Keypad Switches devices from TE Connectivity
Color (Actuator):
Length (Actuator):
Material (Actuator):
Body Width:
Body Color:
Body Height:
Body Length/Diameter:
Center Contact Plating:
Circuit Config:
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
End Contact Material:
Housing Material:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
1825910-1 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
PCN Design/Specification - y-1825910-y Drawing Rev 21/Feb/2014
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rfe International
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Digitron Semiconductors
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Daco Semiconductor
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Vishay Telefunken
MCDTSA6-5R
Multicomp Pro
MCDTSA6-5R by Multicomp Pro is a SPST keypad switch with 50000 cycles electrical life. It has a body width of 6.55in and max operating force of 3.04N, making it ideal for applications requiring momentary-tactile switch action in temperatures ranging from -25°C to 70°C.
5GTH93542
Apem Components
5GTH93542 by Apem Components is a keypad switch with POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and YELLOW LED illumination. It has an electrical life of 10M cycles and IP67 sealing, suitable for applications requiring a SPST switch function in harsh environments. Operating temperatures range from -30°C to 85°C, making it ideal for industrial control panels.
PTS645SM70SMTR92LFS
C & K Components
PTS645SM70SMTR92LFS by C & K Components is a SPST keypad switch with 100000 cycle electrical life and 100000000000 ohm insulation resistance. With a max operating force of 1.57N, it is ideal for applications requiring momentary-tactile switch action in temperatures ranging from -20 to 60°C.
PTS636SK50LFS
PTS636SK50LFS by C & K Components is a black keypad switch with SPST function. It has an electrical life of 30,000 cycles and insulation resistance of 100M ohm. With sealing rating of IP40, it's ideal for applications requiring momentary-tactile switch action in temperatures ranging from -40 to 90°C.
1301.9302
Schurter Ag
The Schurter Ag 1301.9302 is a keypad switch with a single switch and a body width of 6 inches. It has a solderability of REFLOW and a terminal material made of BRASS. This switch is commonly used in applications that require momentary-tactile switch action, such as control panels or electronic devices.
B3U-1000PM
Omron
Omron B3U-1000PM is a black keypad switch with 200000 cycles electrical life. It has SPST switch function, 1.5N max operating force, and -25 to 70°C temp range. Ideal for applications requiring momentary-tactile action, such as consumer electronics or industrial control panels.
MSLPT5252BL1MTR
TE Connectivity
TE Connectivity's MSLPT5252BL1MTR is a SPST Keypad Switch with SILVER actuator and POLYETHYLENE housing. It operates b/w -25 to 70 °C, with 0.05 A AC/DC contact current. Ideal for panel mounting applications requiring 0.686 N operating force.
PTS636SM43JSMTRLFS
PTS636SM43JSMTRLFS by C & K Components is a black keypad switch with an electrical life of 50,000 cycles and insulation resistance of 100M ohm. It operates b/w -40 to 90°C, has a max DC contact voltage of 12V, and features a momentary-tactile switch action. Ideal for applications requiring a reliable surface-mount straight mounting feature in environments up to IP40 sealing standard.
PTS645SL432LFS
PTS645SL432LFS by C & K Components is a SPST keypad switch with 100000 cycles electrical life and 100000000000 ohm insulation resistance. It has a max operating temperature of 60°C and is ideal for applications requiring a momentary-tactile switch with 12VDC max rating.
147873-2
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -35 Cel; Terminal Finish: Silver (Ag);
KMT011NGJLHS
KMT011NGJLHS by C & K Components is a SPST keypad switch with IP68 sealing, suitable for surface mount applications. It offers an electrical life of 300K cycles and a max DC contact voltage of 32V. With a compact body width of 2.6", it operates in temperatures ranging from -40 to 85°C, making it ideal for various industrial and outdoor electronic devices.
DTSM-32N-V-B
Diptronics Manufacturing
DTSM-32N-V-B by Diptronics is a SPST keypad switch with 50,000 cycles electrical life. Featuring a steel housing and brass terminals, it operates b/w -25°C to 70°C. Ideal for applications requiring momentary-tactile switch action in various industries.
EVQPBC07K
Panasonic
The Panasonic EVQPBC07K is a black keypad switch with 100000 cycles electrical life and 50000000 ohm insulation resistance. It has SPST switch function, 0.25mm actuator travel, and -20 to 70°C operating temperature range. Ideal for applications requiring momentary switch action on PCBs with through-hole mounting.
1825910-6
TE Connectivity 1825910-6 is a black keypad switch with nylon housing. It has an electrical life of 100,000 cycles and operates b/w -35°C to 85°C. Ideal for panel mounting applications requiring momentary-tactile switch action with a max DC contact voltage of 24V.
1571220-1
TE Connectivity 1571220-1 is a black keypad switch with polyethylene housing, IP67 sealing, and SPST switch function. It has an electrical life of 1M cycles and operates b/w -35 to 85°C. Ideal for panel mounting applications requiring a momentary-tactile switch with 24VDC max rating.
EVQPC105K
The Panasonic EVQPC105K is a SPST Keypad Switch with 100000 cycles Electrical Life. It operates b/w -20 to 70°C, with a max DC Contact Voltage of 15V. Ideal for applications requiring a momentary switch action and through-hole-right angle mounting.
3-1437566-8
TE Connectivity 3-1437566-8 is a SPST Keypad Switch with 100000 cycles electrical life. It operates at temperatures from -35 to 85°C, with max DC contact voltage of 24V. Ideal for panel mounting applications requiring momentary-tactile switch action and solder termination.
B3FS-1010
Omron's B3FS-1010 Keypad Switch offers SPST switch function with 1000000 cycles electrical life. With a flat plunger type actuator, it has a max operating force of 1.27N and operates at temperatures ranging from -25 to 70°C. Ideal for surface mount applications requiring momentary-tactile switch action.
KMR223GLFG
Itt Cannon
KMR223GLFG by ITT Cannon is a keypad switch with SPST function, IP40 sealing, and 2.8" body width. Ideal for surface mount applications, it has a max operating temperature of 125°C and -40°C min. With a 1 ms contact bounce time and 0.01A@32VDC rating, it offers reliable performance in various electronic devices.
4FSH922
The Apem Components 4FSH922 keypad switch features a green LED illumination, SPST switch function, and IP67 sealing. With an electrical life of 10M cycles, it is ideal for applications requiring a momentary switch action in environments with temperatures ranging from -40°C to 160°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Minimum Operating Temperature: -35 Cel; Body Length/Diameter: 5.99 mm; Maximum DC Contact Voltage: 24 V;
1825910-2
TE Connectivity's 1825910-2 is a black nylon keypad switch with SPST switch function. It has a max operating temperature of 85°C and a min operating temperature of -35°C. This panel mount switch is commonly used in applications requiring momentary action and solder termination.
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Body Height: 3.61 mm; Body Length/Diameter: 5.99 mm; Maximum DC Contact Voltage: 24 V;
1825027-5
TE Connectivity's 1825027-5 Keypad Switch features SPST switch function, 100000 electrical life cycles, and 0.25mm actuator travel. Ideal for panel mounting applications with a max operating temperature of 105°C and black nylon housing material.
1825968-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Additional Features: UL;
1825027-8
TE Connectivity 1825027-8 is a BLUE BUTTON TYPE KEYPAD SWITCH with NYLON housing and COPPER ALLOY terminals. It has an electrical life of 100000 cycles, insulation resistance of 100M ohm, and operates b/w -20 to 105 °C. Ideal for PANEL MOUNT applications requiring MOMENTARY-TACTILE OFF-(ON) contact function.
1825910-7
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Housing Material: NYLON; Body Width: 5.99 inch; Body Length/Diameter: 5.99 mm;
1825965-1
TE Connectivity's 1825965-1 Keypad Switch features SPST switch function, SILVER plating, and 100000 cycle electrical life. Ideal for PANEL MOUNT applications with max operating force of 1.274 N and -35 to 85 °C temperature range.
1825955-6
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Color (Actuator): BLACK; Body Color: BLACK; Maximum Operating Temperature: 85 Cel;
1825910-3
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Electrical Life: 100000 Cycle(s); Maximum Operating Temperature: 85 Cel; Maximum DC Contact Voltage: 24 V;
1825955-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Width: 5.99 inch; End Contact Material: COPPER ALLOY; Switch Action: MOMENTARY;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; DC Maximum Rating R Load (Contact): .05A@24VDC; Manufacturer Series: 1825955; Electrical Life: 100000 Cycle(s);
1825967-1
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SQUARE TYPE; Maximum DC Contact Current: .05 A; Packing Method: BULK;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): SQUARE TYPE; No. of Switches: 1; Switch Action: MOMENTARY;
1825966-1
The TE Connectivity 1825966-1 is a black keypad switch with nylon housing. Featuring SPST switch function, it has an electrical life of 100000 cycles and insulation resistance of 1000000000 ohms. Ideal for panel mounting applications, this momentary-tactile switch operates b/w -35°C to 85°C with a max DC contact voltage of 24V.
1825967-2
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SQUARE TYPE; Minimum Operating Temperature: -35 Cel; Switch Action: MOMENTARY;
1825910-8
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Housing Material: NYLON; Minimum Operating Temperature: -35 Cel; Body Color: BLACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved