Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 170360-1 plug/cap housing has approvals from CSA and UL, rated for 600V with a max temp of 105°C. Featuring stranded construction, crimp terminals, and brass material, it is ideal for power applications with wire gauges ranging from 22 to 18 AWG.
Median Price
$0.059
Lifecycle Status
Suppliers In-Stock
46
In-Stock Inventory
1k+
Boersig
1+ parts
$0.040
100+ parts
-
1k+ parts
10k+ parts
RS Americas
RS (Exports)
$0.060
Conrad
$0.065
Distrelec
$0.098
$0.087
$0.076
Newark
$0.137
$0.112
Element14
$0.141
$0.106
$0.094
$0.090
Powell Electronics
$0.152
Arrow
$0.058
TTI Europe
$0.038
TTI
$0.056
Chip1Stop
$0.039
$0.035
NEP Electronics
Avnet
$0.026
Farnell
$0.045
Verical
$0.084
Future Electronics
$0.036
Mouser Electronics
$0.089
DigiKey
Interstate Connecting
$0.051
Bürklin Elektronik
DF Sales Co.
Greenchips
$0.048
$0.046
$0.041
TME
$0.080
$0.066
$0.063
Maritex
$0.149
$0.023
$0.017
Component Electronics Inc.
$1.150
$0.870
$0.750
FDH Electronics
$2.500
$2.273
$1.923
$1.786
Nova Conductors
$29.020
Cyclops Electronics Ltd
IBS Electronics
$0.057
Vyrian
Electro Sonic
Elcom Components
SIE Connect GmbH - GreenChips
Q Components
NAC Semi
$0.073
Bristol Electronics
A2Z Electronics, Inc.
J & M Industries LLC
LIBRA Elektronik GmbH
Goldney Electronics S.L.
R&J Components
Mil-Aero Solutions, Inc.
ABC Electronics Ltd.
VNN
Semicontronic
$0.032
$0.031
CoreStaff
$0.072
$0.033
$0.028
Aztec Data Supply Inc.
$5.395
Netroflash
$27.569
$26.989
EMSNET (Excess)
Abacus Technologies
GreenTree Electronics
$0.047
Assy Fe
Kepictronics
Continental Prestige Electronics
$0.044
ErreBi Group
Authorized Procurement Solutions
Futuretech Components
Argo Parts USA
Eastek
Formix International (Excess)
Robosynatics
$4.735
$4.639
Lucentia Tech
Having CSA and UL approvals ensures that the product meets safety and quality standards, giving customers peace of mind.
With a high rated voltage of 600 V, this product is suitable for applications requiring high voltage levels.
The high maximum operating temperature of 105°C allows this product to be used in a wide range of environments without performance issues.
Being made of brass, this product offers good conductivity and corrosion resistance, making it a durable and reliable choice.
With a rated current of 7 A, this product can handle moderate current loads, making it suitable for various applications.
Assembly Products 170360-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
170360-1 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - 170360 Drafting Correction 13/Jan/2016 Multiple Devices Drawing Revision 11/Apr/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Taiwan Semiconductor
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
3047028
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END COVER; Approvals (V): GOST; MIL Conformity: NO; IEC Conformity: NO;
AWM-3P
Amphenol
CONNECTOR ACCESSORY;
4-745130-5
TE Connectivity
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
RM16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Style: ROUND PIN-SOCKET; Assembly Item Name: CONTACT; DIN Conformity: NO; Contact Gender: MALE;
SPH-001T-P0.5L
J S T Mfg
SPH-001T-P0.5L by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
W2P
TE Connectivity's W2P is an Assembly Product for DT SERIES, with a max operating temp of 125°C and min of -55°C. It features POWER AND SIGNAL design, POLYBUTYLENE TEREPHTHALATE material, and supports up to 0 AWG wire size. Ideal for applications requiring high temperature resistance and robust electrical connections.
293726-1
282110-1
TE Connectivity's 282110-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 15 AWG, rated for 14A current, and operates b/w -40 to 125 °C. Ideal for applications requiring female blade pin-skt contacts in assembly products.
SHF-001T-0.8BS
SHF-001T-0.8BS by J S T Mfg is a CRIMP terminal for SM SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.047-0.071 inch cable entry. It operates b/w -25 to 85 °C and supports 250V AC/DC voltage. Ideal for female contacts in assembly products requiring a straight mounting style.
163557-2
The TE Connectivity 163557-2 is a MATE-N-LOK HOUSING with CRIMP terminals. It supports wire sizes from 22 AWG to 18 AWG and rated for 15A current at 250V AC. Ideal for power applications, it features FEMALE contacts with ROUND PIN-SOCKET design and BRASS material construction.
Souriau
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 16; Contact Resistance: 3 mohm; Contact Style: ROUND PIN-SOCKET; Maximum Wire Size: 16 AWG;
D38999/33F11R
CONNECTOR ACCESSORY; Shell Sizes: 11; Maximum Operating Temperature: 175 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Material: METAL;
SAN-002T-0.8A
SAN-002T-0.8A by J S T Mfg is a CRIMP terminal with approvals from CSA and UL, rated for 2A current at 250V AC/DC. It is used in SAN CONNECTOR applications, supporting wire sizes from 30 to 24 AWG with a temperature range of -25 to 85°C.
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
43375-0001
Molex
Molex 43375-0001 CONTACT features CRIMP terminal type, rated for 1000V AC/DC, with 18A current. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and BRASS material construction.
282466-1
TE Connectivity's 282466-1 plug housing has a finish thickness of 236.22µm, supports crimp terminals for wire gauge sizes ranging from 15 AWG to 13 AWG. With a rated current of 14A and operating temperatures from -40°C to 125°C, it is ideal for discrete wire applications requiring female contacts in straight mounting style.
WP-4P
WP-4P by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a temperature range of -55 to 125°C, supports wire sizes up to 0 AWG, and is made of Polybutylene Terephthalate. Ideal for power and signal connections in various industries.
A114017-SR
CONNECTOR ACCESSORY; Manufacturer Series: AT-SR;
12089040
Aptiv
Aptiv 12089040 CONTACT is a CRIMP terminal made of BRASS for FLRY-B cables. It has 0.055-0.075 inch cable entry, suitable for assembly products. Ideal for automotive wiring applications due to its precise crimping and durable material.
12124582
Aptiv 12124582 CONTACT is a CRIMP terminal made of COPPER ALLOY for FLRY-B cables. It has a 0.075-0.11 inch cable entry range, ideal for automotive wiring harness assembly. This Assembly Product offers precise and reliable connections in vehicle electrical systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
170366-1
TE Connectivity's 170366-1 plug housing features a stranded construction with crimp terminals, rated for 600V and 7A. Suitable for discrete wire applications, it has a brass design with female contacts and operates b/w -20 to 105°C.
170362-1
TE Connectivity's 170362-1 plug housing has a rated voltage of 600V, suitable for discrete wire applications. With a construction of stranded brass and crimp terminal type, it supports wire gauges from 22 to 18 AWG. The housing is CSA and UL approved, ideal for power connections with a max operating temperature of 105°C.
1703014-1
CONNECTOR ACCESSORY; Rated Current: 34 A; Maximum Cable Entry: .118 inch; Terminal Type: CRIMP; Minimum Operating Temperature: -40 Cel; Minimum Cable Entry: .087 inch;
170364-1
TE Connectivity's 170364-1 is a male power contact with crimp terminal type, suitable for plug or cap housing applications. Featuring a rated voltage of 600V and construction using stranded brass material, it supports wire gauges from 22 to 18 AWG. With approvals from CSA and UL, this contact has a max operating temperature of 105°C and can handle up to 7A of current.
170376-1
CONNECTOR ACCESSORY; Rated Current: 2 A; Wire Gauge (AWG): 20; Minimum Operating Temperature: -20 Cel; Minimum Wire Size: 26 AWG; Assembly Item Name: CONTACT;
170359-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Finish Thickness: 31.49; Maximum Operating Temperature: 105 Cel; Cable Types: DISCRETE WIRE;
1703278-2
CONNECTOR ACCESSORY; Rated Current: 10 A; Wire Gauge (AWG): 15; Contact Design: STAMPED; Maximum Cable Entry: .094 inch; Minimum Operating Temperature: -40 Cel;
170365-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Rated DC Voltage: 600 V; MIL Conformity: NO; Minimum Operating Temperature: -20 Cel;
1703804-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Maximum Operating Temperature: 120 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
1703278-5
CONNECTOR ACCESSORY; Rated Current: 10 A; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 15 AWG; Contact Design: STAMPED; Contact Gender: MALE;
1703034-2
CONNECTOR ACCESSORY; Rated Current: 18 A; Additional Features: MATING: GOLD, TERMINATION: TIN; Wire Gauge (AWG): 17; Contact Design: STAMPED; Finish Thickness: 31;
1703034-1
CONNECTOR ACCESSORY; Rated Current: 15 A; Wire Gauge (AWG): 17; Contact Style: SQUARE PIN-SOCKET; Minimum Cable Entry: .055 inch; Maximum Wire Size: 17 AWG;
170365100201000
Odu Steckverbindungssysteme & Kg
CONNECTOR ACCESSORY; Rated Current: 23 A; Minimum Operating Temperature: -40 Cel; Assembly Item Name: CONTACT; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 12 AWG;
170360-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Terminal Type: CRIMP; Material: BRASS; Minimum Wire Size: 22 AWG;
170361-1
TE Connectivity's 170361-1 plug housing has a rated voltage of 600V, suitable for discrete wire applications. With a max operating temperature of 105°C and construction using stranded brass material, it offers a secure crimp terminal connection for wire gauges ranging from 22 to 26 AWG.
170362-4
TE Connectivity's 170362-4 plug housing has a rated voltage of 600V and can handle up to 7A current. With a construction of stranded phosphor bronze, it is ideal for power applications with wire sizes ranging from 22-18 AWG.
170363-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Finish Thickness: 31.49; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel;
1703013-1
TE Connectivity's 1703013-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 20 A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -40 to 130 °C.
1703810-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 140 Cel; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
170366-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Approvals (V): CSA; UL; Finish Thickness: 31.49; Contact Gender: FEMALE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved