Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 140 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
Median Price
$0.583
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.217
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$0.570
$0.500
$0.340
$0.290
Arrow
$0.612
$0.341
$0.337
DigiKey
$0.720
$0.522
$0.466
$0.406
Mouser Electronics
$0.750
$0.532
$0.474
$0.391
Conrad
$0.759
$0.564
Element14
$0.891
$0.803
Powell Electronics
$1.326
$0.884
TTI
$0.412
$0.402
$0.369
Master Electronics
$0.626
$0.439
$0.372
Verical
$0.418
$0.390
TTI Europe
$0.363
$0.331
$0.277
Farnell
$0.423
Future Electronics
$0.375
$0.355
RS (Exports)
Nova Conductors
$0.365
TME
$0.630
$0.527
$0.481
IBS Electronics
$0.512
$0.484
$0.379
VNN
Vyrian
Electro Sonic
$0.538
$0.435
$0.361
Rapid Electronics
Semicontronic
$0.174
$0.170
$0.169
Aranea Global
$0.358
$0.344
Argo Parts USA
$0.354
Continental Prestige Electronics
$0.561
$0.415
$0.235
Aztec Data Supply Inc.
$5.772
Perfect Parts
EMSNET (Excess)
Assy Fe
Infinite Electronics LLP (Excess)
Futuretech Components
Abacus Technologies
Robosynatics
$3.667
$3.396
Lucentia Tech
Kepictronics
Assembly Products 1564411-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Wire Gauge (AWG):
Maximum Wire Size:
PCN Design/Specification - Material chg 18/AUG/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Hy Electronic
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Vishay Telefunken
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SXH-001T-P0.6N
J S T Mfg
SXH-001T-P0.6N by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes ranging from 26 AWG to 22 AWG and can handle up to 3A of current at a max operating temperature of 85°C. Ideal for applications requiring a FEMALE contact with a contact resistance of 10 mΩ.
2411-001-2405
TE Connectivity 2411-001-2405 nut item for HDP Series Size 24 assemblies. Features include max operating temp of 125°C, min operating temp of -55°C, and contact gender female. Ideal for use with 0 AWG wire due to glass-filled PEI material.
WM-12P
The TE Connectivity WM-12P is an assembly product designed for DTM SERIES applications. It features a max operating temperature of 125°C and a min operating temperature of -55°C. With a design for power and signal, it supports wire sizes up to 0 AWG using polybutylene terephthalate material.
DF20F-2830SCFA
Hirose Electric
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
39-00-0022
Molex
Molex 39-00-0022 CONTACT features CRIMP terminals for 24-18 AWG wires, with 0.051-0.126 inch cable entry. Made of PHOSPHOR BRONZE, it has a 0.197" length and SQUARE PIN-SOCKET style. Ideal for FEMALE contacts in Assembly Products applications.
16-02-0081
CONNECTOR ACCESSORY;
AWP-2S
CONNECTOR ACCESSORY; Usage: ATP06; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel;
0460-010-20141
TE Connectivity's 0460-010-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 16-18 AWG wires at 7.5A current. Ideal for male connectors in straight mounting applications.
1766195-1
TE Connectivity's 1766195-1 is a CRIMP terminal with copper alloy material, suitable for POWER applications. With a finish thickness of 200 µm, it supports wire gauge from 14 to 12 AWG and can handle up to 35 A current. Ideal for male contact gender in straight mounting style, operating b/w -55°C to 105°C.
1062-12-0166
TE Connectivity's 1062-12-0166 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
W6P
W6P by TE Connectivity is an Assembly Product with UL approval. It is designed for DT SERIES applications, with a temperature range of -55 to 125°C. Featuring a max wire size of 0 AWG, it is made of Polybutylene Terephthalate and suitable for power and signal connections.
0462-201-1631
TE Connectivity's 0462-201-1631 contact features a CRIMP terminal type, MACHINED contact design, and can handle temperatures from -55 to 150 °C. Ideal for applications requiring a FEMALE ROUND PIN-SOCKET contact style with wire sizes ranging from 20 to 16 AWG and rated current of 13 A.
50058-8100
The Molex 50058-8100 is a bellowed contact assembly product with phosphor bronze material. It features crimp terminal type, 0.02" min cable entry, and 0.039" max cable entry. Ideal for use with 51021 housing, this female contact accommodates wire sizes from 32 to 28 AWG.
RM16M23K
Souriau
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 16; Contact Resistance: 3 mohm; Contact Style: ROUND PIN-SOCKET; Maximum Wire Size: 16 AWG;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
1053001100
AW12P
AW12P by Amphenol is an assembly product for AT Series connectors. It has a temperature range of -55°C to 125°C, suitable for various environments. With a wire size compatibility of 20-14 AWG and made of polyethylene, it ensures reliable connections in diverse applications.
13711542
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
PX0480
Bulgin
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1564411-2
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 140 Cel; Wire Gauge (AWG): 0; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Maximum Wire Size: 0 AWG;
1564562-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 140 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
1564562-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 140 Cel; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
1564980-1
CONNECTOR ACCESSORY; Rated Current: 8 A; Minimum Cable Entry: .043 inch; Wire Gauge (AWG): 22; Cross Section Area: .35 mm2; Minimum Operating Temperature: -40 Cel;
1564324-1
CONNECTOR ACCESSORY; Rated Current: 8 A; Cross Section Area: .35 mm2; Minimum Wire Size: 24 AWG; Maximum Operating Temperature: 130 Cel; Contact Gender: FEMALE;
1564562-5
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 140 Cel; Wire Gauge (AWG): 0; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Minimum Operating Temperature: -40 Cel;
1564324-2
CONNECTOR ACCESSORY; Rated Current: 8 A; Maximum Wire Size: 22 AWG; Minimum Cable Entry: .043 inch; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -40 Cel;
1564724-3
Assembly Items; Rated Current: 11 A; Contact Design: STAMPED; Maximum Wire Size: 20 AWG; Cross Section Area: .5 mm2; Minimum Operating Temperature: -40 Cel;
1564411-7
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 140 Cel; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
1564228-2
CONNECTOR ACCESSORY; Rated Current: 36 A; Minimum Operating Temperature: -40 Cel; Terminal Type: COMPLIANT FIT; Maximum Wire Size: 0 AWG; Contact Design: STAMPED;
1564411-8
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 140 Cel; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG;
1564411-5
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 140 Cel;
1564411-6
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 140 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved