Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
Median Price
$3.060
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Boersig
1+ parts
$1.479
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$3.380
Mouser Electronics
$3.640
$2.740
$2.330
$2.210
DigiKey
$4.110
$2.969
$2.524
$2.366
RS Americas
$4.130
$3.370
RS (Exports)
$4.190
Conrad
$4.881
TTI
$2.700
$2.300
Master Electronics
$1.980
$1.870
$1.840
Verical
$2.484
$2.229
Future Electronics
$2.360
$2.270
TTI Europe
$2.739
Digiode
$1.405
Bristol Electronics
$9.266
Nova Conductors
$60.590
VNN
IBS Electronics
$3.156
$1.557
NAC Semi
$4.840
$4.400
Vyrian
TME
$1.780
$1.490
Electro Sonic
$3.230
$2.380
EMSNET
LJR Electronics
Extreme Components
Van Brakel Electronic
Elcom Components
Corphita
$1.331
Andel Nordic
$1.548
$1.486
Semicontronic
$2.672
$2.658
Allen Electronics Distributors
Aranea Global
$59.378
$57.003
Bastille Electronics
$57.560
$53.925
Continental Prestige Electronics
Perfect Parts
Resion (Excess)
Argo Parts USA
Glotronic Ltd.
EMSNET (Excess)
Authorized Procurement Solutions
Eastek
Assembly Products 114020-90 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Contact Gender:
Maximum Operating Temperature:
Minimum Operating Temperature:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Lite-on Semiconductor
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
WM-6P
TE Connectivity's WM-6P is an Assembly Product for DTM SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. Designed for power and signal applications, it features Polybutylene Terephthalate material for robust performance.
249-117
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: END STOP; MIL Conformity: NO;
20824050001
Harting Electronics & Kg
CONNECTOR ACCESSORY;
DF11-22SCA
Hirose Electric
936012157
Molex
2270024-1
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Wire Gauge (AWG): 12; Maximum Wire Size: 12 AWG;
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
205090-1
205090-1 by TE Connectivity is an assembly product used in AMPLIMITE applications. It has a finish thickness of 50, terminal type of crimp, and can operate b/w -55 to 125 °C. It is designed for signal transmission with a max rated current of 7.5 A and can accommodate wire sizes ranging from 24 AWG to 20 AWG.
M80-0110005
Harwin Plc
The Harwin PLC M80-0110005 is a CRIMP terminal with max temp of 125°C and min temp of -55°C. It has a rated current of 3A, suitable for 22 AWG wire size. This FEMALE contact with ROUND PIN-SOCKET design is ideal for SIGNAL applications with 0.043" cable entry.
A114017-SR
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: AT-SR;
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
1053251002
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
13711542
Aptiv
Aptiv 13711542 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assemblies.
AT62-203-12141
16-02-0082
Molex 16-02-0082 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 3A and max operating temperature of 105°C, it is ideal for applications requiring a reliable connection in assemblies with wire sizes ranging from 30 to 24 AWG.
AT60-202-16141
RJFTVC2G
CONNECTOR ACCESSORY; Approvals (V): UL; Maximum Operating Temperature: 85 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
DT06-12SC-CE04
TE Connectivity's DT06-12SC-CE04 is a FEMALE connector with 13A rated current and 250V DC voltage. It has 0.053" to 0.12" cable entry, -55°C to 125°C operating temperature range. Ideal for POWER AND SIGNAL applications requiring reliable connections in harsh environments.
FMK2G-K201
Fct Electronic
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Operating Temperature: 100 Cel; Assembly Item Name: HOOD; Material: ZINC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
114017-ZZ
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Assembly Item Name: SEALING ITEM; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; MIL Conformity: NO;
114017
CONNECTOR ACCESSORY; Material: THERMOPLASTIC; DIN Conformity: NO; IEC Conformity: NO; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO;
114021-ZZ
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
114019-ZZ
TE Connectivity's 114019-ZZ is a sealing item designed for power and signal applications. With a temperature range of -55 to 125°C, it can accommodate wire sizes up to 0 AWG. Made from elastomer, it is suitable for use in various assembly products.
1140-0-01-15-00-00-03-0
Mill-max Mfg
114018-ZZ
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel;
114018
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Contact Gender: MALE; Material: THERMOPLASTIC; Design: POWER AND SIGNAL; DIN Conformity: NO;
114019
CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Operating Temperature: 125 Cel; Assembly Item Name: SEALING ITEM; DIN Conformity: NO; Minimum Operating Temperature: -55 Cel;
114017-E
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel; Assembly Item Name: SEALING ITEM;
114017-L
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: SEALING ITEM;
114017-ZZ-E
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; DIN Conformity: NO;
114017-LD
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; DIN Conformity: NO; Assembly Item Name: SEALING ITEM; Maximum Operating Temperature: 125 Cel;
114017-M
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Assembly Item Name: SEALING ITEM; DIN Conformity: NO;
114017-AS
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Assembly Item Name: SEALING ITEM; Maximum Wire Size: 0 AWG; IEC Conformity: NO; DIN Conformity: NO;
114017-B
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; IEC Conformity: NO; Wire Gauge (AWG): 0; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
114017-A
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; Design: POWER AND SIGNAL; IEC Conformity: NO; Maximum Wire Size: 0 AWG;
114017-LS
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO; DIN Conformity: NO;
114017-MS
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; DIN Conformity: NO; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel;
114021
CONNECTOR ACCESSORY; Assembly Item Name: WASHER; IEC Conformity: NO; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: STAINLESS STEEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved