Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-917808-2 is a RECTANGULAR POWER CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, operates b/w -55 to 105 °C, and offers high insulation resistance of 1 Gohm. Ideal for power applications requiring reliable male crimp terminals in commercial settings.
Median Price
$2.965
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Misumi USA
1+ parts
$1.770
100+ parts
1k+ parts
-
10k+ parts
Farnell
$2.770
$2.610
$2.380
Chip1Stop
$3.160
$1.910
$1.850
$1.750
TE Connectivity
$3.580
$3.100
$2.980
Mouser Electronics
$3.800
$2.630
$2.430
$2.180
DigiKey
$4.210
$3.065
$2.701
$2.423
Newark
$4.280
$2.760
$2.440
Element14
$5.010
$4.530
$4.320
PEI Genesis
Master Electronics
$1.923
$1.821
$0.806
Verical
$2.212
$2.141
$1.919
TTI Europe
$2.071
Powell Electronics
$2.360
$1.530
Digiode
$1.624
Vyrian
$1.650
Nova Conductors
$2.232
IBS Electronics
$2.637
$1.711
$1.304
Electro Sonic
$3.130
$2.740
$2.160
TME
$2.860
$1.590
Rapid Electronics
VNN
EMSNET
ACDS - Activité Composants Distribution Service
CoreStaff
$1.424
$0.586
$0.538
Corphita
$1.539
Argo Parts USA
Continental Prestige Electronics
$2.188
Netroflash
Perfect Parts
EMSNET (Excess)
Abacus Technologies
Assy Fe
GreenTree Electronics
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Optimal size for easy installation and compatibility with standard power connector setups.
High insulation resistance ensures safety and prevents electrical leakage or short circuits.
Can withstand high temperatures without compromising performance, suitable for a variety of conditions.
UL 94V-0 flammability rating indicates that the connector is highly flame resistant, ensuring safety in case of fire incidents.
The latch mounting option provides secure and stable attachment, minimizing the risk of disconnection or damage.
Power Connectors 1-917808-2 attributes and parameters. Explore more Power Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-917808-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs - Add alternative material 27/MAY/2021
PCN Packaging - (y)-917808-(y) packaging chg 25/FEB/2020 Packing material 04/JUL/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Central Semiconductor
EU2B-YS3103F
Idec
ROTARY SWITCH;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Sangdest Microelectronics (Nanjing)
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
39-01-4036
The Molex 39-01-4036 is a rectangular power connector with a mating contact pitch of 0.165 inches. It has a body length of 0.543 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in cable and panel mounting applications.
2008750005
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1445957-3
TE Connectivity's 1445957-3 is a RECTANGULAR POWER CONNECTOR with POLYCARBONATE insulator. Rated for 600V, it operates b/w -20 to 105 °C. Suitable for commercial applications, it accommodates wire sizes from 10 AWG to 20 AWG in STRANDED cables.
178496-1
TE Connectivity 178496-1 is a RECTANGULAR POWER CONNECTOR with 3 contacts, rated at 11A. Featuring GLASS FILLED POLYAMIDE66 shell material, it has an insulation resistance of 100MΩ and operates b/w -30 to 105°C. Ideal for board mounting applications requiring a durable connector with a mating contact pitch of 0.156 inches.
03-06-2031
Molex 03-06-2031 is a rectangular power connector with 0.145" mating contact pitch, suitable for commercial applications. Featuring 2100VAC dielectric voltage, it has a rated current of 5A and operates b/w -40 to 105°C. Ideal for panel mounting, this male connector offers reliable performance with a polarization key and crimp termination.
39-01-2060
Molex 39-01-2060 Power Connector features 6 contacts, with 0.543" body length and 0.46" width. Insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operating temp range from -40 to +105°C. Ideal for commercial applications requiring reliable power connections in various industries.
428192213
428192213 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of copper alloy, is suitable for board mounting and has a rated current of 50A.
1376388-1
TE Connectivity's 1376388-1 is a rectangular power connector with GLASS FILLED POLYAMIDE66 insulator. It has 2 contacts, rated at 10A, and operates b/w -40 to 105°C. Ideal for commercial applications, it offers high insulation resistance of 500MΩ and features a crimp termination type.
5223955-2
TE Connectivity 5223955-2 is a rectangular power connector with 4 contacts, rated at 48V and 10A. It features polyethylene insulator material, press-fit termination type, and operates in temperatures from -55 to 125°C. Ideal for board mounting applications requiring reliable commercial-grade power connections.
DF22L-2P-7.92DSA(05)
Hirose Electric
DF22L-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, Tin/Copper finish, and GLASS FILLED POLYAMIDE insulator. It has a temperature range of -35 to 85°C and UL94V-0 flammability rating. Ideal for board mounting applications requiring male blade pin-skt connectors.
39-01-2020
The Molex 39-01-2020 is a rectangular power connector with 0.213" body length, 0.42" width, and 0.77" depth. Featuring POLYAMIDE66 insulator material, it has an insulation resistance of 1Gohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 105°C and offers reliable performance in cable termination setups.
1611990000
Weidmueller & Kg
The Weidmueller & Kg 1611990000 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator and Silver (Ag) termination. Featuring 3 contacts, it is designed for CABLE mounting with SCREW termination. Ideal for applications requiring FEMALE contact gender and SOCKET body style, with UL Flammability Code of 94V-0.
1053081206
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
172233-1
TE Connectivity's 172233-1 power connector features insulation resistance of 100M ohm, rated voltage of 600V, and operating temperature range from -20 to 105°C. Ideal for commercial applications requiring a durable male receptacle with crimp termination and natural insulator color.
IPBD-04-D
Samtec
The Samtec IPBD-04-D is a Power Connector with 0.7" body length and 0.478" width. It has 8 contacts, TIN over NICKEL finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring a reliable crimped female connector with UL standard compliance.
66484-001
Dupont Electronics
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Insulator Material: POLYAMIDE; Additional Features: COMPATIBLE CONTACTS: 76146-001; 76146-003; 76148-001; 76148-003; 76150-001;
10132445-06LF
Amphenol Communications Solutions
POWER CONNECTOR; Reliability: COMMERCIAL; Contact Material: COPPER ALLOY;
15-06-0085
Molex 15-06-0085 is a rectangular power connector with a mating contact pitch of 0.165 inches. It has an insulation resistance of 1G ohm and can withstand temperatures from -40 to 105°C. This connector is commonly used in cable and panel mounting applications for power connections.
3-794630-4
TE Connectivity 3-794630-4 is a power connector with 0.118" mating contact pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, featuring POLYAMIDE insulation material and UL94V-0 flammability rating. With a compact body size of 0.27"x.364", it offers reliable performance in commercial settings.
39-30-6025
The Molex 39-30-6025 is a rectangular power connector with bright tin (Sn) termination contact finish and a polyamide insulator material. It has 2 contacts, made of brass, and is suitable for board mounting with solder termination. This male connector has a UL flammability code of 94V-2.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-917809-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: PANEL;
1-917807-2
TE Connectivity's 1-917807-2 is a RECTANGULAR POWER CONNECTOR with 4 contacts, GLASS FILLED POLYESTER insulator, and UL Flammability Code of 94V-0. It operates in temperatures from -55 to 105 °C and has an insulation resistance of 1 Gohm. Ideal for power applications requiring high reliability and crimp termination.
1-917658-3
Tyco Electronics Amp
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 917658; DIN Conformance: NO; Contact Material: COPPER ALLOY;
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel;
1-917809-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Arrangement: S0P6;
1-917541-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
1-917659-6
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Insertion Force (N): 9.7856;
1-917658-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYETHYLENE/POLYESTER; Mounting Type: BOARD; Mating Contact Finish: NOT SPECIFIED;
1-917658-2 by TE Connectivity is a rectangular power connector with 12 contacts, rated at 8A. It features a mating contact pitch of 0.2", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
1-917659-8
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .581 inch;
1-917659-5
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel;
1-917807-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: CSA, UL;
1-917808-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Additional Features: COMPATIBLE CONTACTS: 917802-2; 917802-3; 917804-2; 917804-3; 917803-2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved