Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-826634-3 is a 26-contact male board connector with 0.1" pitch, suitable for commercial applications. Features include 5A signal current rating, POLYBUTYLENE TEREPHTHALATE insulator, and tin contact finish. Ideal for PCB mounting in electronics with operating temperatures from -65 to 105°C.
Median Price
$2.276
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$4.500
100+ parts
-
1k+ parts
$2.866
10k+ parts
$2.756
Verical
$2.453
Arrow
$1.913
$1.643
Chip1Stop
$2.100
Vyrian
$1.901
Nova Conductors
$1.912
Digiode
$3.249
LIBRA Elektronik GmbH
VNN
Rapid Electronics
Pegasus Components GmbH
ECAB
ACDS - Activité Composants Distribution Service
IBS Electronics
$2.250
$1.925
Aranea Global
$1.873
$1.798
Corphita
$3.078
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Close contact pitch allows for compact design and efficient use of space.
Optimal length for fitting in various electronic applications without taking up too much space.
High insulation resistance ensures reliable and stable performance, especially in demanding environments.
Tin termination provides good conductivity while being cost-effective.
Durable and heat-resistant insulator material for long-term usage.
Suitable for use in applications where high temperatures may be encountered.
Wide temperature range allows for versatility in usage.
Optimal plating thickness for good conductivity and durability.
Specifically designed for board-to-board connections for efficient circuitry.
UL safety certification ensures product meets industry standards for flammability.
High rated current allows for strong signal transmission capabilities.
Color-coding for easy identification and organization in electronic setups.
Sufficient number of contacts for various connections in a single product.
Board mounting for easy integration into electronic circuit boards.
Standard terminal pitch for compatibility with a wide range of components.
Suitable for handling mains power connections up to 5A ratings.
Male contacts for versatile connections in various electronic devices and systems.
Right angle mounting allows for space-saving and ergonomic connections.
Square pin/socket contact style ensures secure and stable connections.
Optimal terminal length for secure connections and easy installation.
Rectangular contact pattern for efficient and stable connections.
Commercial grade reliability for consistent performance in various applications.
Headers & Edge Type Connectors 1-826634-3 attributes and parameters. Explore more Headers & Edge Type Connectors devices from TE Connectivity
Additional Features:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-826634-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - 826629 Tolerance 22/Jan/2019 AMPMODU II Pin Headers Material 07/Apr/2014
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LL4148
Rectron
Taiwan Semiconductor
Loras Industries
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Continental Device India
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
ASP-134486-01
Samtec
Samtec ASP-134486-01 is a 10-row, 400-contact board connector with 0.05" pitch and gold over nickel finish. It features liquid crystal polymer insulator, surface mount termination, and polarized housing for commercial applications requiring high reliability.
09031646921
Harting Electronics & Kg
09031646921 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Body Length of 3.701", and Insulation Resistance of 1000000000000 ohm. Ideal for board connections in applications requiring high durability, it features a PCB Contact Row Spacing of 2.54mm, UL Flammability Code of 94V-0, and Rated Current - Signal at 2A.
XHP-4-BK
J S T Mfg
XHP-4-BK by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
78171-0003
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
B2B-PH-SM4-TB(LF)(SN)
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
B2B-XH-A
B2B-XH-A by J S T Mfg is a BOARD CONNECTOR with 2.5mm Terminal Pitch, Tin/Copper Termination Contact Finish, and Brass Contact Material. It is used for straight mounting on boards, mating with XHP-2 connectors, and has UL Flammability Code of 94V-0.
1473005-4
TE Connectivity
TE Connectivity 1473005-4 is a card edge connector with 200 contacts, 0.024" pitch, and polyethylene insulation. It operates b/w -55°C to 85°C, suitable for PCB mounting applications requiring high durability and reliability in commercial settings.
PAP-02V-S
PAP-02V-S by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 3A signal current rating, and 800VAC dielectric voltage. It features POLYAMIDE66 insulation material and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a reliable female SQ PIN-SKT contact style connector.
B4P-VH-FB-B(LF)(SN)
B4P-VH-FB-B(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.156" mating contact pitch, 0.698" body length, and 0.382" body width. It features tin (Sn) termination contact finish and glass-filled polybutylene terephthalate insulator material. Ideal for applications requiring a male straight mounting style connector with solder termination type.
120591-1
Tyco Electronics Amp
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: PHOSPHOR BRONZE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;
53261-0371
Molex 53261-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style, right-angle mounting, and surface mount termination type.
09061486901
09061486901 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.2", Insulation Resistance of 1TΩ, and Dielectric Withstanding Voltage of 1550VAC. Ideal for board connections in applications requiring durability, reliability, and high current signal transmission at temperatures ranging from -65 to 125°C.
35362-0450
Molex 35362-0450 is a board connector with 4 contacts, featuring 0.079" mating pitch and 0.406" body length. It uses matte tin finish, brass contact material, and polyamide insulator. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
22-03-2021
Molex 22-03-2021 is a board connector with mating contact pitch of 0.1", insulation resistance of 50000000000 ohm, and dielectric voltage of 1500VAC. It has a male contact gender, rated current of 4A for signal transmission, and is suitable for commercial applications requiring durable connections on PCBs.
SHR-03V-S-B
SHR-03V-S-B by J S T Mfg is a BOARD CONNECTOR with 3 contacts, rated for 1A signal current. Featuring a mating contact pitch of 0.039", it has an insulation resistance of 100M ohm and can withstand up to 500VAC. Ideal for applications requiring a compact header connector with high insulation properties and secure crimp termination.
22-05-7048
Molex 22-05-7048 is a board connector with 4 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
BM05B-GHS-TBT(LF)(SN)(N)
BM05B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE insulator, and 500VAC dielectric voltage. Ideal for commercial applications, it features PHOSPHOR BRONZE contacts, TIN finish, and operates b/w -25 to 85 °C.
DF40C-100DP-0.4V(51)
Hirose Electric
DF40C-100DP-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" pitch, 100VAC dielectric voltage, and gold termination finish. Ideal for PCB applications requiring a durable, polarized male plug with liquid crystal polymer insulator material. Operating temperature range from -35 to 85°C makes it suitable for commercial use in various electronic devices.
52207-1160
The Molex 52207-1160 is a FFC/FPC connector with 11 contacts, mating pitch of 0.039", and tin termination finish. It operates b/w -30 to 85°C, suitable for board mounting in applications requiring a right angle receptacle design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-826656-0
TE Connectivity 1-826656-0 is a board connector with 20 contacts, rated at 5A. It features tin termination finish, PBT insulator, and phosphor bronze contact material. With UL certification and green insulator color, it is ideal for applications requiring high insulation resistance and operating temperatures from -65 to 105°C.
1-826634-0
TE Connectivity 1-826634-0 is a 20-contact male board connector with 0.1" pitch, suitable for commercial applications. Features include tin finish, PBT insulator, and phosphor bronze contacts rated at 5A signal current. Ideal for PCB mounting in right-angle configuration with UL94V-0 flammability rating.
1-826629-2
TE Connectivity 1-826629-2 is a board connector with 12 contacts, 0.1" pitch, and tin finish. It has a body length of 1.2", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
1-826658-0
TE Connectivity 1-826658-0 is a 20-contact board connector with POLYBUTYLENE TEREPHTHALATE insulator, Tin termination finish, and rated at 5A. It operates b/w -65 to 105°C and has an insulation resistance of 5G ohm. Ideal for applications requiring high current signal connections in electronic devices.
1-826632-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 26;
1-826629-3
TE Connectivity 1-826629-3 is a board connector with 13 contacts, 0.1" pitch, and 5A signal rating. It features POLYBUTYLENE TEREPHTHALATE insulation, tin finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male receptacle connectors on PCBs.
1-826631-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: GREEN; Additional Features: AMPMODU;
1-826470-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO; Plating Thickness (inch): 31.5u;
1-826631-6
TE Connectivity 1-826631-6 is a board connector with 16 contacts, rated at 5A for signal current. It features tin termination finish, polybutylene terephthalate insulator, and operates b/w -65 to 105°C. Ideal for applications requiring right angle mounting on boards.
1-826632-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: STRAIGHT; DIN Conformance: NO;
1-826469-0
TE Connectivity 1-826469-0 is a 20-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring PCT-POLYESTER insulation material, it offers high insulation resistance of 5G ohm and can handle up to 5A signal current. With a temperature range from -65°C to 105°C, this header connector is ideal for various PCB mounting needs.
1-826629-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.6 inch;
1-826646-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: NO;
1-826947-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Termination Type: SOLDER;
1-826631-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; No. of Ports: 1;
1-826631-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105; MIL Conformity: NO;
1-826629-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
1-826631-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mounting Type: BOARD; UL Flammability Code: 94V-0;
1-826652-0
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO; No. of Ports: 1;
1-826634-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; JESD-609 Code: e3; Maximum Operating Temperature (Cel): 105;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved