Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-776262-1 is a Combination Line Connector with Mating Contact Pitch of 0.157", UL Flammability Code 94V-0, and Rated Current of 17A. Ideal for board mounting applications in commercial settings due to its high reliability and polarized design.
Median Price
$8.392
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.050
100+ parts
-
1k+ parts
10k+ parts
Arrow
$7.763
$6.201
$5.261
Mouser Electronics
$7.890
$6.280
$5.540
Verical
$9.012
Newark
$9.300
$6.860
$6.190
Element14
$11.302
Powell Electronics
$28.096
$12.607
Future Electronics
$5.760
$5.680
TTI
$5.460
$5.270
Avnet
$8.894
$5.430
$4.746
Master Electronics
$4.520
$4.220
$4.210
DigiKey
$10.170
$6.440
Digiode
$4.640
Nova Conductors
$5.699
TME
$9.240
$8.080
$7.720
IBS Electronics
$7.952
$6.928
$6.592
Bristol Electronics
NAC Semi
$11.580
$10.530
Vyrian
VNN
Chip Stock
Electro Sonic
$5.210
$4.620
SPM Sales
Rapid Electronics
Prism Electronics
Semicontronic
$3.420
$3.334
$3.317
Corphita
$4.396
Netroflash
Aztec Data Supply Inc.
$5.700
Continental Prestige Electronics
$8.500
$6.180
ErreBi Group
Authorized Procurement Solutions
Futuretech Components
Argo Parts USA
Glotronic Ltd.
Perfect Parts
Abacus Technologies
EMSNET (Excess)
Assy Fe
The close contact pitch ensures secure and reliable connections between the components, reducing the possibility of signal interference or loss.
The compact body size allows for efficient use of space in the electronic device or equipment where the connector is installed.
The high operating temperature range ensures that the connector can withstand harsh environmental conditions without compromising performance.
The insulator material provides excellent insulation properties, making the connector suitable for a wide range of applications.
The high rated current allows the connector to handle high-power signal transmissions without overheating or damage.
Combination Line Connectors 1-776262-1 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-776262-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 1-77yyyy-(y) standardize plating process 17/FEB/2020 y-77626y-y - design chg 12/FEB/2021
PCN Assembly/Origin - Additional molding and plating capabilities 17/APR/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Weitronic Enterprise
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Socay Electronics
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Meritek Electronics
Surge Components
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
1379658-1
TE Connectivity
TE Connectivity's 1379658-1 is a Combination Line Connector with dimensions of 0.465" x 0.748" x 0.396". Rated for 14V, it operates b/w -40 to 100°C. With UL certification, it has 4 female contacts and is ideal for cable mounting applications.
1719105-1
TE Connectivity's 1719105-1 is a Combination Line Connector with dimensions of 1.902" x 1.299" x 0.909". Rated for 12V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 130 °C. With a total of 14 contacts, it is ideal for cable mounting applications at up to 30A signal current.
DTP06-4S-CE02
Amphenol
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Body Depth: 1.374 inch; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
AT06-12SA-OMGRY
The Amphenol AT06-12SA-OMGRY is a Combination Line Connector with 12 contacts, rated for 13A signal current. It features glass-filled polyamide66 insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug connector with round socket contact style.
DT06-6S-E008
TE Connectivity's DT06-6S-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.701" x 0.814" x 0.946".
15476346
Aptiv
COMBINATION LINE CONNECTOR;
DTM06-12SA-EE04
TE Connectivity's DTM06-12SA-EE04 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
2103124-2
TE Connectivity's 2103124-2 is a Combination Line Connector with EMI shielding, male contact gender, and 2 contacts. It has a body length of 1.78", width of 1.59", and depth of 1.224". This connector is ideal for applications requiring reliable commercial-grade connections in straight mounting configurations.
1718489-1
TE Connectivity's 1718489-1 is a Combination Line Connector with dimensions of 1.512"x.925"x.374". Rated for 36V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 120 °C. Ideal for cable mounting applications, this connector features 18 contacts with a terminal pitch of 4mm and UL Flammability Code of 94-HB.
DTM04-6P-E003
TE Connectivity's DTM04-6P-E003 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
DT06-08SA-EP06
TE Connectivity's DT06-08SA-EP06 is a Combination Line Connector with 8 contacts, rated voltage of 250V, and UL Flammability Code of 94V-0. It features GLASS FILLED POLYAMIDE insulator material and operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, crimp termination female connector with plug body style.
DT04-12PB-B016
TE Connectivity's DT04-12PB-B016 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
DTM04-2P-E007
TE Connectivity's DTM04-2P-E007 is a 2.005" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, polarized key, and male gender suitable for cable mounting applications at 7.5A signal current.
AT06-6S
The Amphenol AT06-6S is a female combination line connector with 6 contacts, rated for 13A signal current. With a compact body size of 0.98" x 0.717" x 1.237", it operates b/w -55°C to 125°C, making it ideal for cable mounting applications.
DTP04-4P-L012
TE Connectivity's DTP04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for panel mounting applications requiring a polarized, UL-certified connector with male contact gender.
DT06-12SD
The TE Connectivity DT06-12SD is a combination line connector with 12 contacts, rated for 250V and 13A. It features glass-filled polyamide insulator material, operates b/w -55 to 125°C, and has UL flammability rating of 94V-0. Ideal for cable mounting applications requiring polarized female connectors with strain relief.
AT06-4S-MM01ORG
33472-1201
Molex
The Molex 33472-1201 is a Combination Line Connector with 12 contacts, rated at 22A. It features a mating contact pitch of 0.138", GLASS FILLED NYLON insulator material, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal connections in polarized housings with crimp terminations.
54201415
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; DIN Conformance: NO; Body Depth: 1.378 inch;
3-1418469-1
TE Connectivity's 3-1418469-1 is a Combination Line Connector with dimensions of 1.693"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140°C. With UL certification, it features 6 contacts at 0.118" spacing, ideal for cable mounting applications at up to 20A signal current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-776163-1
TE Connectivity 1-776163-1 is a Combination Line Connector with 35 contacts, rated at 17A. It features a mating contact pitch of 0.157", POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring a reliable right-angle male connector with solder termination.
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Insulator Material: POLYBUTYLENE TEREPHTHALATE; MIL Conformity: NO;
1-776231-1
TE Connectivity's 1-776231-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, 3.03" Body Length, and Insulation Resistance of 100M ohm. Ideal for applications requiring a durable connector with 35 contacts, rated at 17A signal current and operating temperatures from -40 to 125°C.
1-776087-1
TE Connectivity 1-776087-1 is a Combination Line Connector with dimensions 2.394" x 1.498" x 1.492". It has 23 contacts, rated at 17A, suitable for board mounting applications at temperatures ranging from -40°C to 125°C. The connector features POLYBUTYLENE TEREPHTHALATE insulator material and UL94V-0 flammability code, making it ideal for various electronic systems requiring a polarized, right-angle male terminal connection.
1-776228-1
TE Connectivity's 1-776228-1 is a Combination Line Connector with 23 contacts, rated at 17A. Featuring POLYETHYLENE insulator material, it operates b/w -40 to 125 °C and has a UL Flammability Code of 94V-0. Ideal for board mounting applications, it uses solder termination and mates with connectors like 770680-1; 770680-3.
1-776280-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Panel Mount: NO; Board Mounting Option: BOARD LOCK;
1-776267-1
TE Connectivity's 1-776267-1 is a Combination Line Connector with 3 rows, 14 contacts, and UL94V-0 flammability rating. Featuring a mating contact pitch of 0.157", it is ideal for board mounting applications with a temperature range of -40 to 125°C. The connector has a polarization key, solder termination, and rated current of 17A for reliable commercial use.
1-776163-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Contact Material: BRASS; DIN Conformance: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Mixed Contacts: NO; MIL Conformity: NO;
1-776267-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Body Length: 1.921 inch; DIN Conformance: NO;
1-776163-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 776163; Additional Features: POLARIZED; UL Flammability Code: 94V-0;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
1-776275-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 1.606 inch; Mixed Contacts: NO; Filter Feature: NO;
1-776087-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Filter Feature: NO; Empty Shell: YES;
1-776231-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 3.03 inch;
1-776266-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
1-776087-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; No. of Ports: 1; Board Mounting Option: BOARD LOCK;
1-776180-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Maximum Operating Temperature (Cel): 125; Terminal Pitch (mm): 4;
1-776228-4
TE Connectivity 1-776228-4 is a Combination Line Connector with 23 contacts, rated at 17A. It features POLYETHYLENE insulator material and operates b/w -40 to 125°C. Ideal for board mounting applications due to its straight mounting style and solder termination type.
1-776261-1
TE Connectivity 1-776261-1 is a Combination Line Connector with dimensions 1.921" x 1.264" x 0.759". It has 3 rows, operates b/w -40°C to 125°C, and supports up to 17A signal current. Ideal for board mounting applications requiring a polarized male connector with 14 contacts.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved