Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1-776200-1 is a Combination Line Connector with dimensions of 2.394" x 1.264" x 0.757". It has 23 contacts, rated at 17A, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring a polarized male connector with solder termination.
Median Price
$9.715
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$9.150
100+ parts
$7.140
1k+ parts
$4.580
10k+ parts
-
Verical
$9.460
$9.120
$5.620
$5.050
Mouser Electronics
$13.680
$10.540
$8.790
DigiKey
$10.543
$8.402
Element14
$15.159
$13.356
$12.186
PEI Genesis
Chip1Stop
$9.670
$5.590
$4.460
Farnell
Master Electronics
$9.760
$8.060
Newark
$9.930
$9.540
Powell Electronics
$9.170
$8.810
Avnet
$8.934
$5.479
$4.810
Nova Conductors
$7.282
Digiode
$8.692
TME
$14.800
$11.470
Vyrian
IBS Electronics
$9.113
$5.612
Rapid Electronics
VNN
Electro Sonic
$10.370
$6.120
Bastille Electronics
$6.918
$6.481
Corphita
$8.235
Continental Prestige Electronics
$9.350
Argo Parts USA
Assy Fe
Perfect Parts
The compact size of the body allows for efficient use of space in the connector.
The moderate width of the body provides a good balance between compactness and stability.
The shallow depth of the body makes it ideal for applications where space is limited.
The use of high-quality insulator material ensures reliable electrical insulation and protection.
The high maximum operating temperature allows for use in a wide range of environments.
The low minimum operating temperature ensures the connector can function in cold conditions.
Having multiple loaded rows increases the connector's capacity and versatility.
The specific connector type indicates its compatibility for various applications involving line connections.
The UL 94V-0 flammability rating ensures the connector meets stringent safety standards.
The high rated current allows for efficient transmission of signals without risk of overload.
Having a large number of contacts increases the connector's versatility for different connection requirements.
The board mounting type allows for secure and stable installation on a variety of surfaces.
The solder termination type ensures strong and reliable connections for signal transmission.
Combination Line Connectors 1-776200-1 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-776200-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 1-77yyyy-(y) standardize plating process 17/FEB/2020 y-77yyyy-y - design chg 13/JAN/2021
PCN Assembly/Origin - Additional molding and plating capabilities 17/APR/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
CRG0805F10R
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Unitrode
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
DT04-4P-E008
TE Connectivity's DT04-4P-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief.
1318747-1
TE Connectivity's 1318747-1 is a Combination Line Connector with dimensions of 0.827" x 1.472" x 0.622". It has 32 contacts, rated for 12V and operating temperatures from -30 to 105°C. Ideal for cable mounting applications, this connector features POLYBUTYLENE TEREPHTHALATE insulator material and UL certification.
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
DTM04-12PA-L012
TE Connectivity's DTM04-12PA-L012, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 12 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a male contact gender and panel mounting with strain relief option.
174257-2
TE Connectivity's 174257-2 is a Combination Line Connector with dimensions of 1.087" x 0.811" x 1.154". Rated for 12V, it has POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -30 to 105 °C. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
32006-C22
Eaton Corporation
Eaton Corporation's 32006-C22 is a COMBINATION LINE CONNECTOR with 8 contacts in 2 rows. It has dimensions of 1.571" x 1.035" x 1.213". Ideal for cable mounting, this male connector is suitable for various applications requiring reliable connection solutions.
1-1703639-1
TE Connectivity 1-1703639-1 is a Combination Line Connector with dimensions 2.13"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 140°C. Ideal for applications requiring a polarized, UL-rated connector with 12 contacts and 20A signal current capacity.
AT04-12PA-BL08
Amphenol
The Amphenol AT04-12PA-BL08 is a Combination Line Connector with 12 contacts, rated at 13A signal current. It has a body size of 2.181" x 1.402" x 1.992", made of POLYETHYLENE for -55 to 125°C applications in cable and panel mounting setups.
ATP06-4S-KIT01
ATP06-4S-KIT01 by Amphenol is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signals, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring crimp termination, featuring female contact gender and plug body style.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
ATP06-2S-BLK
The Amphenol ATP06-2S-BLK is a combination line connector with polyethylene insulator, rated for 25A signal current. It operates b/w -55°C to 125°C, suitable for cable mounting applications. Featuring a female contact gender and round pin/socket style, it is ideal for use in environments requiring high temperature resistance.
SMS36SE3K9
Esterline Technologies
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Total No. of Contacts: 36; Mounting Type: BOARD;
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
ATM15-4P-BM03
The Amphenol ATM15-4P-BM03 is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 7.5A for signal current, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring female contact gender and SQ PIN-SKT style connectors.
776536-1
TE Connectivity 776536-1 is a Combination Line Connector with dimensions of 0.969"x1.872"x.884". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125 °C. Suitable for applications requiring a polarized connector with 13A signal current rating and UL certification.
DT04-3P-L012
TE Connectivity's DT04-3P-L012 is a 1.698" x 1.595" x 1.25" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C operating temperatures. It features UL-rated 13A signal current, polarized key, and male contact gender, suitable for panel mounting applications requiring crimp termination with strain relief.
DT04-6P-P021
TE Connectivity's DT04-6P-P021 is a 3-row combination line connector with dimensions of 1.868" x 0.82" x 0.951". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, featuring a male contact gender and glass-filled polyamide insulator material.
776280-1
TE Connectivity's 776280-1 is a Combination Line Connector with dimensions of 1.606" x 1.498" x 1.263". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, UL94V-0 flammability rating, and rated current of 8A. Ideal for board mounting applications in electronics, offering polarized connectors with solder termination and a max operating temperature of 105°C.
1674312-1
The TE Connectivity 1674312-1 is a Combination Line Connector with dimensions of 0.827" x 1.819" x 0.622". It has a rated voltage of 12V and operates b/w -30°C to 105°C. With UL certification, it features 40 contacts in a polarized plug design for cable mounting applications.
3-1418469-1
TE Connectivity's 3-1418469-1 is a Combination Line Connector with dimensions of 1.693"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140°C. With UL certification, it features 6 contacts at 0.118" spacing, ideal for cable mounting applications at up to 20A signal current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-776163-1
TE Connectivity 1-776163-1 is a Combination Line Connector with 35 contacts, rated at 17A. It features a mating contact pitch of 0.157", POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring a reliable right-angle male connector with solder termination.
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Insulator Material: POLYBUTYLENE TEREPHTHALATE; MIL Conformity: NO;
1-776231-1
TE Connectivity's 1-776231-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, 3.03" Body Length, and Insulation Resistance of 100M ohm. Ideal for applications requiring a durable connector with 35 contacts, rated at 17A signal current and operating temperatures from -40 to 125°C.
1-776087-1
TE Connectivity 1-776087-1 is a Combination Line Connector with dimensions 2.394" x 1.498" x 1.492". It has 23 contacts, rated at 17A, suitable for board mounting applications at temperatures ranging from -40°C to 125°C. The connector features POLYBUTYLENE TEREPHTHALATE insulator material and UL94V-0 flammability code, making it ideal for various electronic systems requiring a polarized, right-angle male terminal connection.
1-776228-1
TE Connectivity's 1-776228-1 is a Combination Line Connector with 23 contacts, rated at 17A. Featuring POLYETHYLENE insulator material, it operates b/w -40 to 125 °C and has a UL Flammability Code of 94V-0. Ideal for board mounting applications, it uses solder termination and mates with connectors like 770680-1; 770680-3.
1-776280-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Panel Mount: NO; Board Mounting Option: BOARD LOCK;
1-776267-1
TE Connectivity's 1-776267-1 is a Combination Line Connector with 3 rows, 14 contacts, and UL94V-0 flammability rating. Featuring a mating contact pitch of 0.157", it is ideal for board mounting applications with a temperature range of -40 to 125°C. The connector has a polarization key, solder termination, and rated current of 17A for reliable commercial use.
1-776163-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Contact Material: BRASS; DIN Conformance: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Mixed Contacts: NO; MIL Conformity: NO;
1-776262-1
TE Connectivity 1-776262-1 is a Combination Line Connector with Mating Contact Pitch of 0.157", UL Flammability Code 94V-0, and Rated Current of 17A. Ideal for board mounting applications in commercial settings due to its high reliability and polarized design.
1-776267-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Body Length: 1.921 inch; DIN Conformance: NO;
1-776163-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 776163; Additional Features: POLARIZED; UL Flammability Code: 94V-0;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
1-776275-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 1.606 inch; Mixed Contacts: NO; Filter Feature: NO;
1-776087-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Filter Feature: NO; Empty Shell: YES;
1-776231-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 3.03 inch;
1-776266-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: NO; Filter Feature: NO;
1-776087-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; No. of Ports: 1; Board Mounting Option: BOARD LOCK;
1-776180-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Maximum Operating Temperature (Cel): 125; Terminal Pitch (mm): 4;
1-776228-4
TE Connectivity 1-776228-4 is a Combination Line Connector with 23 contacts, rated at 17A. It features POLYETHYLENE insulator material and operates b/w -40 to 125°C. Ideal for board mounting applications due to its straight mounting style and solder termination type.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved