Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-1747277-3 is a rectangular power connector with GLASS FILLED POLYESTER insulator. It has 3 contacts, rated at 23A, suitable for board mounting with solderable retention clips. Operating temperature range from -55 to 105 °C makes it ideal for various power applications.
Median Price
$8.640
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$11.200
100+ parts
$11.000
1k+ parts
$7.330
10k+ parts
$6.860
Chip1Stop
-
$6.560
$5.770
$2.280
Farnell
$8.260
Master Electronics
$9.020
$7.030
Verical
$10.612
$10.529
Powell Electronics
$7.480
$7.350
Digiode
$8.484
Vyrian
VNN
IBS Electronics
$24.153
$8.770
Nova Conductors
TME
$9.360
Semicontronic
$3.060
$2.984
$2.968
Corphita
$8.037
Perfect Parts
Futuretech Components
Continental Prestige Electronics
GreenTree Electronics
Argo Parts USA
Netroflash
Assy Fe
Compact size allows for easy installation in tight spaces.
Provides excellent insulation and durability, ensuring reliable performance.
Can withstand high temperatures, suitable for various environments.
Specifically designed for power applications, ensuring secure and stable connections.
UL 94V-0 rated for high flame resistance, enhancing safety.
Allows for multiple connections, increasing versatility.
Solder termination ensures a strong and reliable connection.
Power Connectors 1-1747277-3 attributes and parameters. Explore more Power Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-1747277-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
39-01-2146
Molex
The Molex 39-01-2146 is a rectangular power connector with 14 contacts, POLYAMIDE insulator, and 2200VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination connectors on panels.
2-794617-4
TE Connectivity
TE Connectivity 2-794617-4 is a Power Connector with 24 contacts, rated at 250V and 5A. Featuring POLYAMIDE66 insulator material, it has a mating contact pitch of 0.118" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable power connections.
1723161106
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
43650-0300
Molex 43650-0300 is a rectangular power connector with 3 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN and insulator material of glass filled liquid crystal polymer.
1-917807-2
TE Connectivity's 1-917807-2 is a RECTANGULAR POWER CONNECTOR with 4 contacts, GLASS FILLED POLYESTER insulator, and UL Flammability Code of 94V-0. It operates in temperatures from -55 to 105 °C and has an insulation resistance of 1 Gohm. Ideal for power applications requiring high reliability and crimp termination.
76829-0004
Molex 76829-0004 is a rectangular power connector with 4 contacts, featuring liquid crystal polymer insulator and matte tin finish. Withstanding voltage of 2200VAC, it's ideal for board mounting applications in commercial settings with operating temperatures ranging from -40 to 105°C.
43025-1200
The Molex 43025-1200 is a power connector with 0.742" x 0.326" x 0.551" dimensions, polyester insulator, and 12 contacts. It operates b/w -40°C to 105°C, UL94V-0 rated, and features crimp termination for cable mounting. Ideal for commercial applications requiring board connectors with female SQ pin-skt contact style.
4-794627-0
TE Connectivity 4-794627-0 is a Power Connector with 0.118" contact pitch, rated for 250V and -40 to 105°C operating range. Ideal for board mounting with matte tin finish, it features POLYAMIDE insulation and UL94V-0 flammability rating.
15-24-6181
The Molex 15-24-6181 is a rectangular power connector with 18 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL.
1-917658-3
TE Connectivity 1-917658-3 is a rectangular power connector with 12 contacts, rated at 8A. It features a body length of 1.551", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durable connectors with solder termination.
1723163308
Molex 1723163308 power connector has dimensions of 0.681" x 0.533" x 0.732", made of liquid crystal polymer. With 8 contacts, it operates b/w -40°C to 105°C, UL certified with flammability rating of 94V-0. Used in board mounting applications for solder termination, mating with 1722583108.
DF22R-2P-7.92DSA(05)
Hirose Electric
DF22R-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, male blade pin-skt style. It has GLASS FILLED POLYAMIDE insulator, Tin/Copper termination finish, and operates b/w -35 to 85°C. Ideal for board mounting applications requiring UL 94V-0 compliance.
03-09-1032
Molex 03-09-1032 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 1500VAC and can handle up to 12A signal current. With POLYAMIDE66 insulator material, it operates b/w -40°C to 105°C temperature range.
350781-1
TE Connectivity's 350781-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. With 6 contacts, it operates in -55 to 105 °C and has an insulation resistance of 1000000000 ohm. Ideal for power applications, this connector features a panel mounting type and male contact gender.
10153466-08LF
Amphenol Communications Solutions
The Amphenol 10153466-08LF is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40°C to 105°C, ideal for cable mounting applications requiring crimp termination. The connector's compact dimensions of 0.764" x 0.484" x 0.78" make it suitable for various power transmission needs.
43650-0224
Molex 43650-0224 is a rectangular power connector with bright tin finish. It features glass-filled liquid crystal polymer insulator and brass contacts. Ideal for board mounting in applications requiring male surface mount connectors with 2 contacts.
2-282191-1
TE Connectivity's 2-282191-1 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYAMIDE66 insulator. Featuring 3 FEMALE contacts, it is designed for CABLE mounting with WIRE termination. Ideal for power applications requiring reliable and secure connections.
794805-1
TE Connectivity's 794805-1 is a rectangular power connector with POLYAMIDE insulator. It has 2 loaded rows, 4 contacts, and operates b/w -20 to 105°C. Suitable for cable mounting applications at 115/230VAC, UL94V-0 rated with crimp termination for female contacts.
1954289-2
TE Connectivity's 1954289-2 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures ranging from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
44300-0400
The Molex 44300-0400 is a rectangular power connector with 4 contacts, 0.118" mating contact pitch, and -40 to 105°C operating temperature range. It features polyester insulation, UL94V-0 flammability rating, and crimp termination for commercial applications in cable and panel mounting scenarios.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1747277-2
TE Connectivity 1-1747277-2 is a rectangular power connector with GLASS FILLED POLYESTER insulator. It has a rated current of 24A, solder termination, and operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender and straight mounting style.
1-1747147-5
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
1-1747147-7
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Rated Current - Signal: 20 A; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
1-1747819-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO; UL Flammability Code: 94V-0;
1-1744524-5
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; No. of Ports: 1;
1-1744524-6
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-2: LATCHING; Maximum Wire Size: 18 AWG;
1-1744490-0
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 1; DIN Conformance: NO;
1-1744524-0
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Terminal Length: .145 inch;
1-1744524-1
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 120u; EMI Shielded: NO;
1-1744524-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO; Reference Standard: UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved