Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): 1 W; Tolerance: 20 %; No. of Terminals: 3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 1-1625939-5 attributes and parameters. Explore more Variable Resistors devices from TE Connectivity
Orientation (Actuator):
Type (Actuator):
Manufacturer Series:
Mounting Type:
No. of Terminals:
No. of Turns:
Shape (Package):
Rated Power Dissipation (P):
Resistance:
Law Of Resistance:
Resistor Type:
Technology:
Terminal Shape:
Tolerance:
1-1625939-5 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Vishay Intertechnology
EU2B-YS2J03C
Idec
ROTARY SWITCH;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
RV4LAYSA102A
Clarostat Sensors And Controls
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
P161G201QSA30D105
Tt Electronics Plc
P161G201QSA30D105 by Tt Electronics Plc is a 1M ohm potentiometer with 12 terminals, rated at 0.1W power dissipation. Featuring conductive plastic technology and an audio resistance law, it is designed for PCB mounting applications requiring precise resistance adjustments in a temperature range of -10 to 70°C.
3299P-1-101LF
Bourns
Bourns 3299P-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
91A1A-B28-A15L
The Bourns 91A1A-B28-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
T93YB103KT20
Vishay Intertechnology's T93YB103KT20 is a 10000 ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a CERMET technology, matte tin terminal finish, and can handle up to 0.5 W power dissipation.
64WR1KLF
64WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 1000 ohm resistance, 12 turns, and linear resistance law. It operates b/w -65 to 150 °C and has a rated power dissipation of 0.25 W. Ideal for PCB mounting applications due to its rectangular package shape and through-hole mounting type.
PVZ3A104C01B00
Murata Manufacturing
Murata Manufacturing's PVZ3A104C01B00 is a 100k ohm linear trimmer resistor with 30% tolerance, suitable for surface mount applications. It operates b/w -25°C to 85°C, with a temperature coefficient of 500 ppm/°C and max voltage of 50V. The rectangular package measures 3.2mm x 3.1mm x 1.85mm, featuring a screw actuator and gold terminal finish for precise resistance adjustments up to 230° rotation angle.
3362U-1-501LF
Bourns 3362U-1-501LF is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
RT025AS4700KB
Vishay Intertechnology's RT025AS4700KB is a 470 ohm linear wire wound potentiometer with 10% tolerance. Operating voltage of 108V, rated power dissipation of 25W, and temperature range from -55 to 320 °C make it ideal for panel mount applications requiring precise resistance control.
3224W-1-253E
The Bourns 3224W-1-253E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 25k ohm, tolerance of 10%, and rated power dissipation of 0.25W. Ideal for applications requiring precise resistance adjustments in compact SMT designs with operating temperatures ranging from -65 to 150°C.
3006P-1-203LF
The Bourns 3006P-1-203LF is a CERMET potentiometer with 20000 ohm resistance, 15 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise voltage control.
TC73W-1-103E
Bourns TC73W-1-103E is a 10000 ohm linear trimmer resistor with 20 turns, rated for temperatures b/w -25 to 85 °C. Ideal for SMT applications, featuring a screw actuator and 30% tolerance, suitable for various electronic circuit adjustments.
P160KNP-0EC15A100K
P160KNP-0EC15A100K by Tt Electronics Plc is a 100k ohm POTENTIOMETER with CONDUCTIVE PLASTIC tech, AUDIO law of resistance, and 20% tolerance. It's used in applications requiring precise rotary control like audio equipment and industrial machinery due to its PCB Mount package style and PANEL mounting type.
534B1202JC
Vishay Intertechnology's 534B1202JC is a 2000 ohm linear wire wound potentiometer with 10 turns and 5% tolerance. Operating at temperatures from -55 to 125 °C, it has a rated power of 2W and operates at an operating voltage of 63.2V. Ideal for precise resistance adjustments in various electronic applications.
3006P-1-501LF
Bourns 3006P-1-501LF is a 500 ohm linear trimmer pot with 15 turns and CERMET technology. It has a max operating temperature of 125°C, suitable for PCB mount applications in various electronic circuits requiring precise resistance adjustments.
3224J-1-100E
Bourns 3224J-1-100E is a linear trimmer pot with 12 turns, 10 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for precise resistance adjustments in electronic circuits requiring compact SMT components.
PTA6043-2215DPB103
Bourns PTA6043-2215DPB103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It has a slide actuator, through-hole mounting type, and operates at -10 to 50 °C. Ideal for PCB applications requiring precise voltage control in compact spaces.
25XR100LF
25XR100LF by Tt Electronics Plc is a linear variable resistor with a resistance of 100 ohm. It has a max operating temperature of 125 °C and can handle an operating voltage of 300 V. This trimmer resistor is commonly used in PCB mount applications for precise resistance adjustments.
3852A-282-103AL
Bourns 3852A-282-103AL is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 2 W power dissipation. It has a linear law of resistance, operates b/w -1 to 125 °C, and offers a shaft actuator for precise control. Ideal for panel mount applications requiring a reliable and durable variable resistor.
RJS5K0E
Ohmite Manufacturing
The Ohmite Manufacturing RJS5K0E is a 5000 ohm linear wire wound potentiometer with 10% tolerance and 50W power dissipation. It features a circular package, panel mount style, and shaft actuator for precise control in various applications such as industrial machinery and electronic equipment.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TE Connectivity
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved