Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-1617128-9 is a DPDT-CO power/signal relay with 2 FORM C sealing. It has a max operating temperature of 125°C and coil resistance of 100 ohm. Ideal for applications requiring hermetically sealed, momentary relay action in panels with AC/DC supply needs.
Median Price
$111.969
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$95.180
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$98.300
$85.100
Master Electronics
$77.260
Verical
$112.400
Farnell
$114.660
Newark
$127.000
PEI Genesis
Powell Electronics
$89.280
$80.110
Rapid Electronics
$99.948
VNN
Nova Conductors
Vyrian
TME
EMSNET
IBS Electronics
Aztec Data Supply Inc.
$1.960
Semicontronic
$75.860
$73.964
$73.584
Argo Parts USA
Continental Prestige Electronics
Assy Fe
Bastille Electronics
The DPDT-CO function allows for double pole, double throw operation, providing versatile switching capabilities.
Having 2 FORM C configuration allows for two independent circuits to be controlled by a single relay, increasing efficiency.
Hermetically sealed construction ensures protection against environmental factors, increasing reliability and durability.
With a high maximum operating temperature of 125 °C, this relay can function effectively even in extreme heat conditions.
Low DC coil current consumption of 0.05 A helps in energy efficiency and reduces power consumption.
The ability to handle a maximum AC contact current of 1 A makes this relay suitable for various low-power applications.
The low minimum operating temperature of -65 °C ensures reliable operation even in extremely cold environments.
Capable of handling up to 28 V DC contact voltage, making it suitable for a wide range of voltage applications.
Supports both AC and DC supply types, providing flexibility in compatibility with different systems.
The dual capability as a power and signal relay makes this product versatile for various types of circuits.
The coil power consumption of 250 mW is efficient and helps in reducing overall power usage.
The low coil resistance results in faster response times and improved relay performance.
The option of solder or quick connect termination provides ease of installation and maintenance.
Panel mounting feature allows for easy and secure installation in various equipment and systems.
Supports a maximum DC coil voltage of 5 V, suitable for low voltage applications and minimizing power requirements.
Power & Signal Relays 1-1617128-9 attributes and parameters. Explore more Power & Signal Relays devices from TE Connectivity
Relay Type:
Relay Function:
Relay Action:
Relay Form:
Coil/Input Supply Type:
Contact/Output Supply Type:
Contact Maximum AC Current:
Contact Maximum AC Voltage:
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Coil Power:
Coil Resistance:
Coil Maximum DC Voltage:
Coil Maximum DC Coil Current:
Mounting Type:
Minimum Operating Temperature:
Maximum Operating Temperature:
Termination Type:
Sealing Type:
Additional Features:
1-1617128-9 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.41.00.20
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Asi Semiconductor
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1393203-9
Tyco Electronics Cii
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
40.31.9.024.0000
Finder
Finder's 40.31.9.024.0000 is a SPDT power/signal relay with 7ms operate time and 200,000 cycles electrical life. It has a max AC contact current of 10A@250VAC, making it ideal for applications requiring momentary relay action in industrial settings.
1721547-5
TE Connectivity 1721547-5 is a SPST power/signal relay with 1 FORM A configuration. Operate time of 10ms, insulation resistance of 1Gohm, and max AC contact current of 5A@250VAC. Ideal for applications requiring momentary relay action in various industries.
UB2-12NUN-L
KEMET Corporation
UB2-12NUN-L by KEMET is a DPDT relay with 2 FORM C, operate time of 2ms, and electrical life of 100000 cycles. Ideal for power applications at temperatures ranging from -40 to 85°C, it features a max contact DC power rating of 30W@220VDC. With gold alloy plating and silver alloy contacts, this relay is suitable for AC/DC supply types in various electronic systems.
1649329-1
TE Connectivity 1649329-1 is a DPDT relay with 2 FORM C, suitable for power/signal applications. It operates b/w -40 to 85°C, with coil voltage of 3.5V DC and contact current up to 8A AC/DC. Featuring SILVER NICKEL contacts, it meets UL and VDE standards for reliable performance in various industries.
PRD-5AY0-120
TE Connectivity's PRD-5AY0-120 is a 1 FORM C SPDT power/signal relay with 120V coil voltage. It features 25A max AC/DC contact current, 0.082A max AC coil current, and 290 ohm coil resistance. Ideal for panel mounting applications in various industries requiring reliable switching capabilities.
1-1649329-3
TE Connectivity 1-1649329-3 is a DPDT relay with 2 FORM C, suitable for power/signal applications. It has a max AC contact current of 8A and operates at a coil voltage of 12V DC. With dimensions of 29mm x 12.7mm x 15.7mm, it offers dielectric strength up to 5000 Vrms b/w coil & contacts.
RTB14024F
Tyco Electronics Elcon
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
1-1415899-9
G2RL-14-E-CFDC12
Omron
Omron's G2RL-14-E-CFDC12 is a SPDT power/signal relay with 7ms operate time and 15.7mm height. It has 16A@440VAC max contact AC rating, ideal for applications requiring momentary relay action in temperatures ranging from -40 to 85°C.
40.61.7.024.0000
Finder 40.61.7.024.0000 is a SPDT power/signal relay with 1 FORM C, suitable for AC/DC applications. It operates at 10ms, has a max AC contact current of 16A@400VAC, and a coil resistance of 1150 ohm. Ideal for various industries requiring reliable switching control in compact spaces.
G5V-2DC5
Omron G5V-2DC5 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 5V, has 8 terminals, and offers gold plating for end contacts. With a coil resistance of 50 ohm and max contact ratings of 2A@125VAC/DC, it's ideal for applications requiring reliable switching in industrial electronics.
1-1393239-6
TE Connectivity 1-1393239-6 is a SPDT power/signal relay with 8ms operate time and 6000 cycles electrical life. It has a max AC contact current of 12A@400VAC, making it suitable for applications requiring momentary relay action in power systems.
DK2A-5V
Panasonic
DK2A-5V by Panasonic is a DPST power/signal relay with 10ms operate time and 100000 cycle electrical life. It has a max AC contact current of 8A@250VAC, making it suitable for applications requiring momentary relay action in various industries. With a compact size of 20mm x 15mm x 10mm and gold terminal finish, it offers reliable performance in temperature ranges from -40°C to 65°C.
G5LE-1-E-DC5
Omron G5LE-1-E-DC5 is a SPDT power/signal relay with 10.6ms operate time and 36000 cycles electrical life. It has a max AC contact current of 16A@250VAC, making it suitable for applications requiring momentary relay action in various industries.
G6K-2F-YDC4.5
Omron G6K-2F-YDC4.5 is a DPDT relay with 2 FORM C form factor, operate time of 3ms, and insulation resistance of 1Gohm. Ideal for AC/DC applications with max contact current of 1A@30VDC and AC rating of 0.3A@125VAC. Suitable for power/signal relay needs in various industries due to its compact size (10mm x 6.5mm x 5.2mm) and sealed design ensuring reliability in harsh environments.
G5V-2-H1DC5
Omron G5V-2-H1DC5 is a DPDT power/signal relay with 7ms operate time and 100000 cycles electrical life. It has a max AC contact current of 1A@125VAC, making it suitable for applications requiring momentary relay action in various electronic devices.
1393236-2
TE Connectivity's 1393236-2 is a SPDT power/signal relay with 1 FORM C form factor. It operates at 12ms, has a max temp of 85°C, and supports AC contact current up to 6A@400VAC. Ideal for applications requiring momentary relay action in power systems or signal processing setups.
ALQ305
ALQ305 by Panasonic is a 1 FORM A SPST power/signal relay with 20ms operate time and 50,000 cycles electrical life. With a max contact DC power rating of 150W@30VDC, it is suitable for applications requiring momentary relay action in moisture-proof environments. This compact relay features a coil resistance of 125 ohm and dielectric strength up to 4000 Vrms, making it ideal for AC/DC switching control on PCBs.
1-1649328-3
TE Connectivity 1-1649328-3 is a SPDT power/signal relay with 1 FORM C form factor. It operates at -40 to 85°C, with coil voltage of 12V and contact current up to 12A AC/DC. Ideal for applications requiring momentary relay action, such as control systems and industrial automation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1618002-8
TE Connectivity 1-1618002-8 is a SPST-NO power/signal relay with 500A AC/DC contact current and 900V DC contact voltage. Featuring copper alloy end contacts, it has a coil resistance of 3.14 ohm and supports panel mounting. Ideal for applications requiring momentary relay action in various industries.
1-1618240-4
TE Connectivity 1-1618240-4 is a SPST-NC power/signal relay with 25A max AC/DC contact current and 10V max DC contact voltage. Ideal for applications requiring momentary relay action, such as panel-mounted power systems or signal control circuits.
1-1617119-6
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST-CO; Coil or Input Supply Type: DC; Maximum AC Contact Voltage: 28 V;
1-1617076-6
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT-CO; Coil or Input Supply Type: DC; Contact or Output Supply Type: AC/DC;
1-1617146-8
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Termination Type: SOLDER/QUICK CONNECT;
1-1617122-4
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Maximum AC Contact Current: 1 A; Coil Resistance: 1560 ohm;
1-1617749-8
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Relay Form: 2 FORM C;
1-1617122-3
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Maximum DC Contact Current: 1 A; Termination Type: SOLDER/QUICK CONNECT;
1-1618278-6
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Contact or Output Supply Type: AC/DC; Termination Type: SOLDER/QUICK CONNECT;
1-1617121-1
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Maximum AC Contact Voltage: 28 V;
1-1617122-2
TE Connectivity 1-1617122-2 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates in temperatures from -65 to 125 °C, with max DC contact current of 1A. Ideal for applications requiring hermetically sealed, momentary action relays.
1-1617754-7
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT-CO; Coil or Input Supply Type: DC; Relay Form: 4 FORM C;
1-1617128-6
1-1617076-3
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT-CO; Coil or Input Supply Type: DC; Reference Standard: M39016;
1-1617120-2
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Function: SPST-CO; Coil or Input Supply Type: DC; Termination Type: SOLDER/QUICK CONNECT; Maximum DC Coil Voltage: 5 V;
1-1617039-2
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Relay Form: 2 FORM C; Minimum Operating Temperature: -65 Cel;
1-1617795-3
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST-NO-DM; Coil or Input Supply Type: DC; Sealing: HERMETICALLY SEALED;
1-1617788-6
The TE Connectivity 1-1617788-6 is a hermetically sealed power/signal relay with a DPDT-CO function. It has a max operating temperature of 125°C and a min operating temperature of -70°C. It has a coil resistance of 320 ohm and a max DC coil voltage of 28V. This relay is designed for panel mounting and is suitable for various applications requiring reliable power and signal switching.
1-1617036-5
POWER/SIGNAL RELAY;
1-1617121-4
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Maximum AC Contact Current: 1 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved