Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-1564528-1 is a Combination Line Connector with dimensions 2.071" x 1.063" x 1.894". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and can handle up to 40A signal current. Ideal for applications requiring a polarized, UL-rated connector with male contact gender.
Median Price
$4.542
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Newark
1+ parts
$2.680
100+ parts
1k+ parts
10k+ parts
-
TE Connectivity
$3.790
Farnell
$4.250
$2.630
$2.580
Element14
$5.323
$4.266
$3.282
Mouser Electronics
$5.490
$3.780
$3.490
DigiKey
$6.740
$5.109
$4.136
Conrad
$7.277
Master Electronics
$3.700
$2.930
$2.730
Verical
$4.353
$3.576
Powell Electronics
$4.730
$3.840
Digiode
$2.688
Maritex
$3.501
$2.266
Nova Conductors
$3.510
VNN
IBS Electronics
$5.189
$4.109
$3.829
TME
$2.090
Vyrian
Euro-Tech
Bristol Electronics
Corphita
$2.547
Continental Prestige Electronics
$3.509
$3.439
Argo Parts USA
Aztec Data Supply Inc.
$3.523
ErreBi Group
EMSNET (Excess)
Abacus Technologies
This length ensures that the connector can fit easily into various types of equipment or devices.
The high rated voltage of 60V allows for reliable and efficient power transmission in applications that require this level of voltage.
This high-quality insulator material ensures excellent electrical insulation and resistance to heat, making the connector durable and long-lasting.
The high maximum operating temperature allows the connector to be used in a wide range of environments without compromising performance.
This specific type of connector is designed for multiple connections, making it versatile and suitable for various applications.
With a high number of contacts, this connector can accommodate multiple connections, improving efficiency and functionality.
Combination Line Connectors 1-1564528-1 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
1-1564528-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Material chg 06/FEB/2023
PCN Assembly/Origin - Manual assembly line added 07/SEP/2022
PCN Packaging - Packaging chg 08/FEB/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
DT06-4S-CE04
TE Connectivity's DT06-4S-CE04 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
AT06-2S-BLK
Amphenol
Amphenol's AT06-2S-BLK is a combination line connector with 2 contacts, rated at 13A. It has a compact body size of 0.713" x 0.591" x 1.126", made of polyethylene for durability. Ideal for cable mounting applications, it operates b/w -55°C to 125°C, featuring female contact gender and crimp termination.
12065402
Aptiv
Aptiv's 12065402 is a Combination Line Connector with dimensions of 0.964" x 0.791" x 1.023". It features 2 female SQ PIN-SKT contacts and is ideal for automotive applications.
282189-1
TE Connectivity 282189-1 is a Combination Line Connector with dimensions of 0.937"x.866"x1.476". Rated for 24V, it has POLYAMIDE insulator and operates b/w -30 to 125°C. With 20A signal current, it features polarized housing and female contact gender, suitable for cable mounting applications.
DTM06-2S-E004
TE Connectivity's DTM06-2S-E004 is a 1.085" x 0.475" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features polarized housing, UL 94V-0 flammability code, and crimp termination. Ideal for applications requiring a 7.5A signal current in cable mounting setups.
12020832
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: COMPATIBLE CONTACTS: 12124581; 12124580; 15408312; 12020801; Mixed Contacts: NO; Insulator Material: POLYAMIDE6;
AT06-2S-SR01BLK
The Amphenol AT06-2S-SR01BLK is a combination line connector with 2 contacts, rated for 13A signal current. It features a POLYETHYLENE insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with round pin sockets.
174257-2
TE Connectivity's 174257-2 is a Combination Line Connector with dimensions of 1.087" x 0.811" x 1.154". Rated for 12V, it has POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -30 to 105 °C. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
DTM06-12SB-E003
TE Connectivity's DTM06-12SB-E003 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle up to 7.5A signal current. Ideal for applications requiring a polarized, crimp termination female connector with plug body style and strain relief mounting option.
DF62W-2EP-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
AT04-4P-BLK
The Amphenol AT04-4P-BLK is a combination line connector with 2 rows, rated for 13A signal current. With a temperature range of -55 to 125°C, it features male contact gender and round pin/socket style. Ideal for cable mounting applications, mating with AT04-4S-BLK connectors.
DTP06-4S-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel; Additional Features: POALRIZED; Insulator Material: POLYETHYLENE;
12131792
COMBINATION LINE CONNECTOR;
934446121
TE Connectivity 934446121 is a Combination Line Connector with 2 loaded rows. It operates b/w -55°C to 125°C, suitable for cable mounting applications. Features include polarized key, terminal pitch of 4.45mm, and mains connector rating of 115/230VAC.
1379674-1
TE Connectivity's 1379674-1 is a Combination Line Connector with dimensions of 0.551" x 1.315" x 0.463". Rated for 14V, it has UL certification and operates b/w -40 to 100°C. Ideal for cable mounting applications, this connector features a total of 4 contacts with a rated current of 7.5A.
AT06-2S-BRN
The Amphenol AT06-2S-BRN is a combination line connector with 2 contacts, rated for 13A signal current. It features a POLYETHYLENE insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female contact style plug with crimp termination.
DT06-12SB-CE06
TE Connectivity's DT06-12SB-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped female plug with strain relief, rated at 13A signal current.
2-2141227-2
TE Connectivity's 2-2141227-2 is a EMI shielded combination line connector with rated current of 45A. It operates b/w -40 to 140°C, featuring solder termination and male contact gender. Ideal for panel mounting applications with terminal pitch of 11.5mm and straight mounting style.
2-1418390-1
TE Connectivity 2-1418390-1 is a Combination Line Connector with dimensions 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, suitable for cable mounting applications at up to 40A signal current.
DT06-3S
TE Connectivity's DT06-3S is a 3-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications, this female connector features nickel termination finish and glass-filled polyamide insulator material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1563759-1
TE Connectivity 1-1563759-1, a Combination Line Connector with 18 contacts, rated voltage of 60V and current of 20A. Ideal for cable mounting applications, featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operating temperatures from -40 to 140°C.
1-1564416-1
TE Connectivity 1-1564416-1 is a Combination Line Connector with dimensions 1.673" x 1.852" x 1.567". It has a rated voltage of 60V, UL flammability code of 94V-0, and can handle up to 20A current. Ideal for applications requiring male connectors with polarized polarization key and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material.
1-1564526-1
TE Connectivity's 1-1564526-1 is a combination line connector with dimensions of 2.461" x 1.567" x 1.854". It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 140°C. This connector is commonly used in panels and has a UL flammability code of 94V-0, making it suitable for various applications requiring a max current of 20A.
1-1564297-6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Maximum Operating Temperature (Cel): 120; Contact Material: NOT SPECIFIED;
1-1564520-1
TE Connectivity 1-1564520-1 is a Combination Line Connector with dimensions 1.988" x 1.852" x 1.567". It has a rated voltage of 60V, UL flammability code of 94V-0, and can handle up to 20A current. Ideal for applications requiring male contact gender, panel mounting, and polarization key for secure connections.
1-1564330-1
TE Connectivity's 1-1564330-1 is a combination line connector with dimensions of 2.646" x 1.012" x 1.23". It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 140°C. This connector is commonly used for cable mounting applications, offering a max current rating of 40A and UL flammability code of 94V-0.
1-1564559-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 25A; DIN Conformance: NO; Panel Mount: NO;
1-1564337-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mains Connector Rating: 40A; IEC Conformity: NO; UL Flammability Code: 94V-0;
1-1564414-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Current - Signal: 20 A; Rated Voltage: 60 V; Mating Contact Finish: NOT SPECIFIED;
1-1564512-1
TE Connectivity's 1-1564512-1 is a combination line connector with dimensions of 1.283" x 1.854" x 1.063". It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 140°C. This connector has a total of 8 contacts, UL flammability code of 94V-0, and is suitable for panel mounting applications requiring a current rating of up to 20A.
1-1564514-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Total No. of Contacts: 10; Mixed Contacts: NO;
1-1564534-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Maximum Operating Temperature (Cel): 140; UL Flammability Code: 94V-0;
1-1564516-1
TE Connectivity's 1-1564516-1 is a combination line connector with dimensions of 1.598" x 1.063" x 1.894". It has a rated voltage of 60V and can handle a max operating temperature of 140°C. This connector is commonly used in panel mounting applications, offering a rated current of 40A and UL flammability code of 94V-0.
1-1564407-1
TE Connectivity's 1-1564407-1 is a Combination Line Connector with dimensions of 2.461" x 1.894" x 1.567". It has a rated voltage of 60V, UL Flammability Code of 94V-0, and can handle up to 40A current. Ideal for applications requiring a polarized male hybrid connector with strain relief mounting on panels.
1-1564542-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Polarization Key: POLARIZED; Contact Material: NOT SPECIFIED;
1-1564518-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Terminal Pitch (mm): 4; EMI Shielded: NO;
1-1564532-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 2.461 inch; MIL Conformity: NO; Terminal Pitch (mm): 4;
1-1564522-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Body Length: 1.598 inch; EMI Shielded: NO;
1-1564546-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Panel Mount: NO; Filter Feature: NO;
1-1564544-1
TE Connectivity 1-1564544-1 is a Combination Line Connector with dimensions 1.283" x 1.992" x 1.063". Rated for 60V, it operates b/w -40°C to 140°C. With UL certification, it has a rated current of 40A and is ideal for panel mounting applications requiring male contact gender and polarized key features.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved