Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-1379165-3 is a Combination Line Connector with 0.803" body length and 0.339" width. Rated for 12V, it operates b/w -40 to 85°C. Ideal for board mounting with solder termination, suitable for applications requiring male contact gender and mains connector rating of 115/230VAC.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
Digiode
AZTECH Wire
$8.180
Continental Prestige Electronics
Argo Parts USA
Corphita
Bastille Electronics
A compact body length of 0.803 inch makes this connector suitable for applications with limited space.
The slim body width of 0.339 inch allows for easy integration into various devices and equipment.
Safe and efficient operation at a rated voltage of 12V, suitable for low voltage applications.
Board lock feature ensures secure mounting on the board, minimizing the risk of disconnection.
High maximum operating temperature of 85°C allows for reliable performance in various environmental conditions.
With a minimum operating temperature of -40°C, this connector is suitable for use in cold environments.
Empty shell design allows for customization and flexibility in configuring the connector according to specific requirements.
Specifically designed for combination line connectivity, making it a specialized choice for certain applications.
Board mounting type ensures easy installation on circuit boards, enhancing overall efficiency.
Standard terminal pitch of 2.54mm allows for compatibility with various components and boards.
High mains connector rating of 115/230VAC enables versatile use in different power supply setups.
Solder termination type offers a reliable and secure connection method for long-term usage.
Male contact gender is commonly used for connecting to female connectors, ensuring compatibility in a wide range of applications.
Straight mounting style provides a simple and straightforward installation process, ideal for quick and efficient assembly.
Combination Line Connectors 1-1379165-3 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Board Mounting Option:
Body Width:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Voltage:
Terminal Pitch (mm):
Termination Type:
1-1379165-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
SMBJ18CA
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Multicomp Pro
175975-2
TE Connectivity
TE Connectivity's 175975-2 is a Combination Line Connector with dimensions of 0.886" x 1.575". It has Matte Tin finish, rated for 12V, and operates b/w -30 to 105°C. With 20 contacts, it uses POLYBUTYLENE TEREPHTHALATE insulator material and is ideal for board mounting in applications requiring a mains connector rating of 115/230VAC.
1719105-1
TE Connectivity's 1719105-1 is a Combination Line Connector with dimensions of 1.902" x 1.299" x 0.909". Rated for 12V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 130 °C. With a total of 14 contacts, it is ideal for cable mounting applications at up to 30A signal current.
AT06-12SA-SS01
Amphenol
Amphenol's AT06-12SA-SS01 is a 2-row COMBINATION LINE CONNECTOR with 12 contacts, rated at 13A. It has dimensions of 1.598" x 0.815" x 1.354" and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-12PA-SS01 FEMALE connectors using RND PIN-SKT contact style.
DT06-08SA-CE10
TE Connectivity's DT06-08SA-CE10 is a combination line connector with dimensions of 1.217" x 0.776" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a max current rating of 13A and UL flammability code of 94V-0.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
194180002
Molex
Molex 194180002 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER insulator. Featuring 8 contacts, it uses CRIMP termination and is UL 94V-0 rated. Ideal for cable mounting applications requiring female receptacle connectors.
DT04-08PA-CE03
TE Connectivity's DT04-08PA-CE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 8 contacts, rated at 250V and 13A for signal current. With a temperature range of -55 to 125 °C, it is ideal for cable mounting applications requiring a polarized male connector with strain relief option.
DTM06-12SA
TE Connectivity's DTM06-12SA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with crimp termination.
12162193
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Insulator Material: POLYBUTYLENE TEREPHTHALATE; IEC Conformity: NO;
12065298
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Empty Shell: NO; Body Depth: 1.023 inch;
DT06-08SA-E008
TE Connectivity's DT06-08SA-E008 is a 2-row combination line connector with dimensions of 1.742" x 0.872" x 1.465". It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and UL flammability rating of 94V-0. With a total of 8 contacts, this female connector is ideal for applications requiring a current signal rating of up to 13A in cable mounting setups with crimp termination and strain relief option.
ATM06-3S
The Amphenol ATM06-3S is a combination line connector with 3 contacts, rated at 7.5A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has a body size of 0.642" x 0.638" x 1.087".
180923
TE Connectivity 180923 is a Combination Line Connector with POLYAMIDE insulator. It has 2 contacts, suitable for cable mounting with 0.9"x.453"x.902" dimensions. Operating from -40 to 105°C, it's a female receptacle connector for mains rated at 115/230VAC, mating with 180924.
12015799
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Mixed Contacts: NO; Filter Feature: NO;
929504-7
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; IEC Conformity: NO; MIL Conformity: NO;
1-350766-1
TE Connectivity 1-350766-1 is a Combination Line Connector with 600V rating, POLYAMIDE insulator, and -55 to 105 °C operating temperature range. It has one connector with three contacts for cable mounting applications. Compliant with CSA, UL, V standards, it features crimp termination and female contact gender in a brown plug shell.
DT06-12SA-C017
TE Connectivity's DT06-12SA-C017 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
DT06-2S-CE04
TE Connectivity's DT06-2S-CE04 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features a polarized design, UL94V-0 flammability code, and supports 13A signal current. Ideal for cable mounting applications requiring crimp termination with strain relief.
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
DT06-12SD-P012
TE Connectivity's DT06-12SD-P012 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1379674-1
TE Connectivity 1-1379674-1 is a Combination Line Connector with dimensions of 0.551" x 1.315" x 0.463". Rated for 14V, it has an operating temperature range of -40 to 100°C. Ideal for applications requiring a polarized male connector with a signal current rating of 7.5A.
1-1379165-6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; EMI Shielded: NO; Mounting Style: STRAIGHT;
1-1379165-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; EMI Shielded: NO; Mating Contact Finish: NOT SPECIFIED; Mounting Type: BOARD;
1-1376430-7
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; No. of Ports: 1; Mounting Type: BOARD;
1-1379913-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 85; Body Length: 1.559 inch; Minimum Operating Temperature: -40 Cel;
1-1379913-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Mating Contact Row Spacing (inch): 0.35;
1-1376392-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 4;
1-1379114-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; Body Length: 1.587 inch; Filter Feature: NO; Mounting Type: PANEL;
1-1376350-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Rated Voltage: 12 V; No. of Ports: 1;
1-1376350-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; EMI Shielded: NO; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Panel Mount: NO;
1-1376350-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .559 inch; Terminal Pitch (mm): 2.2; No. of Rows Loaded: 2;
1-1376350-9
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mains Connector Rating: 115/230VAC; No. of Rows Loaded: 2;
1-1376357-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mains Connector Rating: 115/230VAC; IEC Conformity: NO;
1-1376357-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; DIN Conformance: NO; Body Width: 1.673 inch;
1-1376430-8
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Body Width: 4.437 inch; No. of Rows Loaded: 3;
1-1379684-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Board Mounting Option: BOARD LOCK; Mixed Contacts: NO;
1-1376111-1
Combination Line Connectors; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; No. of Ports: 1; Terminal Pitch (mm): 2.2;
1-1376111-3
Combination Line Connectors; Option: GENERAL PURPOSE; Contact Gender: MALE; EMI Shielded: NO; Maximum Operating Temperature (Cel): 105; No. of Rows Loaded: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved