Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: 1.25 ohm; Rated Current: .2 A; Packing Method: TR, 7 INCH; Minimum Operating Temperature: -55 Cel;
Median Price
$0.054
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.053
1k+ parts
$0.041
10k+ parts
$0.029
DigiKey
$0.043
$0.040
TTI
-
Future Electronics
Arrow
Verical
Element14
$0.049
$0.037
Farnell
$0.044
$0.038
$0.026
Chip1Stop
Newark
$0.059
$0.047
Chip Stock
Bristol Electronics
NAC Semi
Inventory MP
Resion
Semtec, LLC
Prism Electronics
Metaverse IC Inc.
Authorized Procurement Solutions
Kepictronics
Perfect Parts
Data Line Filters MMZ0603S102HT000 attributes and parameters. Explore more Data Line Filters devices from TDK
Construction:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
MMZ0603S102HT000 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - MMZ,MPS Series Oct/2014
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
35F0121-0SR-10
Laird Technologies
Laird Technologies' 35F0121-0SR-10 is a chip bead data line filter with 2 terminals, rated for 10A current. With dimensions of L4.06XB3.05XH2.54 mm, it operates b/w -45 to 125 °C and offers an output impedance of 36 OHM. Ideal for surface mount applications, this filter has a max frequency of 13 MHz and DC resistance of 0.0008 ohm.
ZJYS51R5-M4PA(T)-01
TDK ZJYS51R5-M4PA(T)-01 is a data line filter with 4 functions, rated voltage of 50V, and insulation resistance of 100 Mohm. It operates b/w -25 to 85 °C and has dimensions of L10.5xB6.86xH4.57 mm. Ideal for applications requiring noise suppression in data lines at a max current of 0.5A.
YFF31HC2A105MT000N
YFF31HC2A105MT000N by TDK is a FEED THROUGH CAPACITOR with 100 V rated voltage, 40 dB max insertion loss, and 6 A rated current. Ideal for data line filtering applications due to its compact dimensions of L3.2XB1.6XH1.3 (mm) and surface mounting type.
1250F-003
Spectrum Control
DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;
744229
Wuerth Elektronik & Kg
Wurth Elektronik 744229 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 6.5uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.95 ohm, and output impedance of 18400 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
P0469NLT
Pulse Electronics
P0469NLT by Pulse Electronics is a DATA LINE FILTER with 2 functions, inductance of 630uH, and max operating temp of 120°C. Ideal for automotive applications due to AEC-Q200 screening level, rated current of 11.6A, and compact dimensions of L30.99xB25.4xH12.7mm.
LI0805G301R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; No. of Functions: 1; Terminal Finish: Tin (Sn); Output Impedance (ohm): 300 OHM;
CM1624-08DE
CM1624-08DE by Onsemi is a 4-function data line filter with a rated voltage of 2.5V, inductance of 0.02uH, and max DC resistance of 46 ohm. It operates b/w -40 to 85 °C and has dimensions of L3.4XB1.45XH0.55 (mm). Ideal for applications requiring efficient data line filtering in compact spaces.
HZ1206E601R-10
Laird Technologies' HZ1206E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers an output impedance of 600 OHM and a max frequency of 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a DC resistance of 0.3 ohm and rated current of 0.5 A.
742792133
Wurth Elektronik 742792133 is a FERRITE CHIP Data Line Filter with dimensions L3.2XB1.6XH1.1 (mm). It has a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C, suitable for surface mount applications with a rated current of 0.5 A and output impedance of 600 OHM.
HZ0603B112R-10
FERRITE CHIP; Maximum DC Resistance: .8 ohm; Rated Current: .2 A; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; No. of Terminals: 2;
FBMH1608HM102-T
Taiyo Yuden
Taiyo Yuden's FBMH1608HM102-T is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -40 to 125 °C and has a max DC resistance of 0.35 ohm. Ideal for surface mount applications, it offers an output impedance of 1000 OHM at a min frequency of 100 MHz.
ACT45B-510-2P-TL001
The TDK ACT45B-510-2P-TL001 is a data line filter with 2 functions, rated at 50V and 0.2A. It offers a min insulation resistance of 10 Mohm and operates b/w -40 to 150 °C. Ideal for applications requiring noise suppression in data lines.
7116
Bourns
The Bourns 7116 is a data line filter with two functions. It has a maximum operating temperature of 105°C and a minimum operating temperature of -55°C. The inductance is 8000 uH and the maximum DC resistance is 0.2 ohm. It is a through-hole mount and rated for a current of 2 A.
ILBB-0805ER601V
Vishay Intertechnology
Vishay Intertechnology's ILBB-0805ER601V is a 2-terminal data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 0.3 ohm DC resistance and 600 OHM output impedance at 100 MHz. Ideal for surface mount applications, this chip measures L2.0XB1.25XH0.9 (mm) and is commonly used in electronic devices for noise suppression.
MPZ1608S601ATA00
TDK's MPZ1608S601ATA00 is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.15 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM18AG102SN1D
Murata Manufacturing
Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
74279263
Wurth Elektronik 74279263 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and a max frequency of 350 MHz, it offers an output impedance of 220 ohm and can handle up to 1A rated current. Ideal for surface mount installations in electronic devices requiring noise suppression on data lines.
BLM21AG151SN1D
BLM21AG151SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to reduce noise in data lines.
BLM15PX601SN1D
Murata Manufacturing's BLM15PX601SN1D is a FERRITE CHIP data line filter with 0.5mm width, 1mm length, and 0.5mm height. It has a max DC resistance of 0.23 ohm and an output impedance of 600 ohm, suitable for surface mount applications in electronics to manage interference on data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved