Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK DPX165950DT-8048A1 is a surface mount Duplexer with Tx Insertion Loss of 0.65 dB and Rx Insertion Loss of 0.65 dB. It operates b/w -40 to 85 °C, with Transmit and Receive Center Frequency at 5425 MHz. Ideal for applications requiring high-frequency signal filtering in compact spaces.
Median Price
$0.196
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.143
1k+ parts
-
10k+ parts
Mouser Electronics
$0.320
$0.236
$0.188
$0.153
DigiKey
$0.235
$0.203
$0.180
Avnet
$0.127
Farnell
$0.177
$0.130
$0.118
Element14
$0.291
$0.269
$0.265
Chip1Stop
$0.102
$0.087
$0.086
Newark
$0.214
$0.198
Verical
$0.131
Chip Stock
Prism Electronics
Sunrise Surplus Inc.
Formix International (Excess)
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Kepictronics
Perfect Parts
iodParts Technologies Inc.
A duplexer allows for simultaneous transmission and reception on the same frequency band, making it ideal for devices that need to send and receive signals at the same time.
The high maximum operating temperature ensures that this duplexer can be used in a variety of environments without risk of overheating or malfunctioning.
The low insertion loss on the transmit side ensures minimal signal loss during transmission, resulting in clear and reliable communication.
The low minimum operating temperature allows the duplexer to function even in very cold conditions, making it suitable for use in a wide range of climates.
The compact width of the duplexer makes it easy to integrate into existing circuitry or devices without taking up too much space.
The short length of the duplexer also contributes to its small form factor, making it an ideal choice for compact electronics.
The surface mount design of the duplexer simplifies the installation process and allows for easy integration onto printed circuit boards or other surfaces.
The receive center frequency of 5425 MHz enables the duplexer to effectively filter and separate incoming signals at this specific frequency for optimal performance.
Just like the transmit side, the low insertion loss on the receive side ensures minimal signal loss during reception, resulting in clear and reliable communication.
The transmit center frequency of 5425 MHz aligns with the receive center frequency, allowing for seamless communication and data transmission between devices.
The slim height of the duplexer further contributes to its compact design, making it an excellent choice for space-constrained applications.
Duplexers DPX165950DT-8048A1 attributes and parameters. Explore more Duplexers devices from TDK
Additional Features:
Filter Type:
Height:
Rx Insertion Loss:
Tx Insertion Loss:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Receive Center Frequency:
Transmit Center Frequency:
Width (mm):
PCN Assembly/Origin - Additional Manufacturing Site 08/Feb/2019
PCN Packaging - Carrier Tape Material 04/Sep/2017
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Diotec Semiconductor Ag
Leshan Radio
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Semitron
ACMD-7407-TR1
Broadcom
DUPLEXER; Length: 2.5 mm; JESD-609 Code: e4; Additional Features: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Transmit Center Frequency: 1880 MHz;
ACMD-6103-TR1
DUPLEXER; Minimum Operating Temperature: -40 Cel; Transmit Center Frequency: 1747.5 MHz; Receive Center Frequency: 1842.5 MHz; Tx Insertion Loss: 3.5 dB; Packing Method: TR, 7 INCH;
ACMD-7606-TR1
DUPLEXER; Tx Insertion Loss: 2.7 dB; Rx Insertion Loss: 3 dB; Maximum Operating Temperature: 85 Cel; Additional Features: TAPE AND REEL; Package Material: PLASTIC;
ACMD-7612-TR1
DUPLEXER; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC; Tx Insertion Loss: 1.6 dB; Height: 1.2 mm; Maximum Operating Temperature: 85 Cel;
ACMD-7402-TR1
DUPLEXER; Maximum Operating Temperature: 85 Cel; Length: 3.8 mm; Minimum Operating Temperature: -30 Cel; Height: 1.2 mm; Terminal Finish: Gold (Au);
ACMD-6025-TR1
DUPLEXER; Minimum Operating Temperature: -10 Cel; Terminal Finish: Gold (Au); Mounting Type: SURFACE MOUNT; Height: .85 mm; No. of Terminals: 9;
TQQ1030
Qorvo
TQQ1030 by Qorvo is a surface mount duplexer with Tx Insertion Loss of 2.3 dB and Rx Insertion Loss of 2.8 dB. It operates b/w -20°C to 90°C, with Transmit Center Frequency at 2310 MHz and Receive Center Frequency at 2355 MHz. Ideal for applications requiring high-performance duplexing in compact spaces.
ACMD-7407-BLK
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Additional Features: ANTI-STATIC BAG; Maximum Operating Temperature: 85 Cel; Height: .95 mm; Transmit Center Frequency: 1880 MHz;
ACMD-7614-TR1
DUPLEXER; Transmit Center Frequency: 1950 MHz; Rx Insertion Loss: 2.3 dB; No. of Terminals: 9; Packing Method: TR; Additional Features: TAPE AND REEL; POWER CAPTURED WITH RESPECT TO -40 TO 85 TEMP RANGE;
ACMD-7702-TR1
DUPLEXER; Transmit Center Frequency: 1765 MHz; Height: 1.2 mm; Minimum Operating Temperature: -30 Cel; Dimensions: L3.8XB3.8XH1.2 (mm)/L0.15XB0.15XH0.047 (inch); No. of Terminals: 3;
SAYEY1G88BA0B0A
Murata Manufacturing
Murata Manufacturing's SAYEY1G88BA0B0A is a Duplexer with Tx Insertion Loss of 2.8 dB and Rx Insertion Loss of 3.2 dB. Operating temperatures range from -20 to 85°C, suitable for applications requiring Transmit Center Frequency at 1880 MHz and Receive Center Frequency at 1960 MHz.
ACMD-6107-TR1
DUPLEXER; Packing Method: TR; Additional Features: TR, 7 INCH; Transmit Center Frequency: 2535 MHz; Tx Insertion Loss: 3 dB; Mounting Type: SURFACE MOUNT;
ACMD-7612
DUPLEXER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3; Rx Insertion Loss: 2 dB; Additional Features: CW TRANSMIT POWER CONSIDERED WITH RESPECT TO OPERATING TEMP -40 TO 85; Height: 1.2 mm;
ACMD-7403-TR1
DUPLEXER; Tx Insertion Loss: 2.7 dB; Width (mm): 3.0; Length: 3 mm; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel;
ACMD-7403-BLK
DUPLEXER; No. of Terminals: 3; Transmit Center Frequency: 1909 MHz; Minimum Operating Temperature: -30 Cel; Width (mm): 3.0; Rx Insertion Loss: 3.2 dB;
ACMD-6207-TR1
DUPLEXER; Minimum Operating Temperature: -40 Cel; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Packing Method: TR, 7 INCH; Height: .825 mm; Length: 2 mm;
TDX1210
Vectron International
DUPLEXER; Length: 3.8 mm; Rx Insertion Loss: 5 dB; Tx Insertion Loss: 5 dB; Transmit Center Frequency: 1210 MHz; Packing Method: TR, EMBOSSED, 13 INCH;
ACMD-7409-BLK
DUPLEXER; Minimum Operating Temperature: -30 Cel; Tx Insertion Loss: 3.5 dB; Additional Features: ANTI-STATIC BAG; Rx Insertion Loss: 3.5 dB; Mounting Type: SURFACE MOUNT;
DIP2450-01D3
STMicroelectronics
DUPLEXER;
ACMD-7609-TR1
DUPLEXER; Width (mm): 2.0; No. of Terminals: 9; Maximum Operating Temperature: 85 Cel; Additional Features: TAPE AND REEL; Mounting Type: SURFACE MOUNT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TDK
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved