Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Additional Features: ANTI-STATIC BAG; Maximum Operating Temperature: 85 Cel; Height: .95 mm; Transmit Center Frequency: 1880 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
M&R Communications
Bristol Electronics
LWI Electronics Inc
Native Components
$0.693
Northwest PG Solutions
$0.762
Decca Corp
$6.000
$5.880
$5.821
Andel Nordic
$7.981
$7.662
A-Z Elektronik GmbH
Alle Elektronik GmbH
Supply Digital
Authorized Procurement Solutions
Kepictronics
Corphita
Futuretech Components
Duplexers ACMD-7407-BLK attributes and parameters. Explore more Duplexers devices from Broadcom
Additional Features:
Filter Type:
Height:
Rx Insertion Loss:
Tx Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Receive Center Frequency:
Terminal Finish:
Transmit Center Frequency:
Width (mm):
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
D6HQ1G962DP39
Taiyo Yuden
Taiyo Yuden's D6HQ1G962DP39 is a surface mount DUPLEXER with Tx Insertion Loss of 2.4 dB and Rx Insertion Loss of 2.7 dB. Operating temperatures range from -10°C to 85°C, making it ideal for various applications in telecommunications and wireless devices.
B39771B8035P810
TDK
TDK's B39771B8035P810 is a surface mount DUPLEXER with Tx Insertion Loss of 3.2 dB and Rx Insertion Loss of 3.5 dB. Operating temperatures range from -10°C to 85°C, making it ideal for applications requiring duplexing at frequencies around 718 MHz for receiving and 773 MHz for transmitting signals.
LFD21829MDPFC270
Murata Manufacturing
Murata Manufacturing's LFD21829MDPFC270 is a duplexer with Tx Insertion Loss of 0.55 dB and Rx Insertion Loss of 0.32 dB. It operates b/w -40 to 85 °C, with Transmit Center Frequency at 2200 MHz and Receive Center Frequency at 829 MHz. Ideal for applications requiring high-frequency filtering in compact spaces.
FL1012
Pulse Electronics
FL1012 by Pulse Electronics is a 17 MHz DUPLEXER with Tx Insertion Loss of 1 dB and Rx Insertion Loss of 0.8 dB. Measuring L25.02XB9.78XH8.08 (mm), it's ideal for THROUGH HOLE MOUNT applications in various electronic devices requiring duplexing capabilities.
ACMD-7605-BLK
Broadcom
DUPLEXER; JESD-609 Code: e4; Additional Features: BAG; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -30 Cel; Rx Insertion Loss: 4 dB;
DPX202700DT-4162A1
DPX202700DT-4162A1 by TDK is a surface mount DUPLEXER with Tx Insertion Loss of 0.5 dB and Rx Insertion Loss of 0.5 dB. It operates b/w -40 to 85 °C and has Transmit/Receive Center Frequency at 2205 MHz, making it ideal for RF communication applications.
D6HQ1G962DP39-Z
DUPLEXER;
0892DP14A1850T
Johanson Technology
ACMD-7403
DUPLEXER; Maximum Operating Temperature: 85 Cel; Transmit Center Frequency: 1880 MHz; Tx Insertion Loss: 2.7 dB; Additional Features: CW TRANSMIT POWER CONSIDERED WITH RESPECT TO OPERATING TEMP -40 TO 85; Receive Center Frequency: 1960 MHz;
TDX1227
Microsemi
DUPLEXER; Length: 3.81 mm; Maximum Operating Temperature: 85 Cel; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Packing Method: TR, 13 INCH; Mounting Type: SURFACE MOUNT;
ACMD-7402-BLK
DUPLEXER; Package Material: PLASTIC; Dimensions: L3.8XB3.8XH1.2 (mm)/L0.15XB0.15XH0.047 (inch); Height: 1.2 mm; Minimum Operating Temperature: -30 Cel; Manufacturer Series: ACMD-7402;
SP000252220
Infineon Technologies
DUPLEXER; Minimum Operating Temperature: -30 Cel; Tx Insertion Loss: 3.5 dB; Length: 3.8 mm; Height: 1.11 mm; Rx Insertion Loss: 3.8 dB;
ACMD-6025-TR1
DUPLEXER; Minimum Operating Temperature: -10 Cel; Terminal Finish: Gold (Au); Mounting Type: SURFACE MOUNT; Height: .85 mm; No. of Terminals: 9;
D6PF1G960M3B6-Z
ACMD-6103-TR1
DUPLEXER; Minimum Operating Temperature: -40 Cel; Transmit Center Frequency: 1747.5 MHz; Receive Center Frequency: 1842.5 MHz; Tx Insertion Loss: 3.5 dB; Packing Method: TR, 7 INCH;
D5FC847M0K3NE-Z
Taiyo Yuden's D5FC847M0K3NE-Z is a surface mount Duplexer with Tx Insertion Loss of 2.5 dB and Rx Insertion Loss of 3 dB. Operating b/w -30°C to 85°C, it has Transmit Center Frequency at 847 MHz and Receive Center Frequency at 806 MHz, making it ideal for wireless communication applications.
HPMD-7904-BLK
DUPLEXER; Minimum Operating Temperature: -30 Cel; Dimensions: L11.88XB5.63XH1.9 (mm)/L0.468XB0.222XH0.075 (inch); Rx Insertion Loss: 3.8 dB; Width (mm): 5.63; No. of Terminals: 3;
ACMD-7606-TR1
DUPLEXER; Tx Insertion Loss: 2.7 dB; Rx Insertion Loss: 3 dB; Maximum Operating Temperature: 85 Cel; Additional Features: TAPE AND REEL; Package Material: PLASTIC;
HPMD-7905-BLK
DUPLEXER; Additional Features: BULK; Terminal Finish: Tin/Lead (Sn/Pb); Rx Insertion Loss: 3.8 dB; Minimum Operating Temperature: -30 Cel; Height: 1.9 mm;
LFD21829MDKED859
Murata Manufacturing's LFD21829MDKED859 is a duplexer with Tx Insertion Loss of 0.5 dB and Rx Insertion Loss of 0.5 dB. Operating temperatures range from -40 to 85 °C, suitable for applications requiring a compact design at 2200 MHz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACMD-6225
ACMD-6103-BLK
DUPLEXER; Receive Center Frequency: 1842.5 MHz; Tx Insertion Loss: 3.5 dB; Rx Insertion Loss: 4 dB; Packing Method: TAPE; Width (mm): 1.6;
ACMD-6013-TR1
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Additional Features: TR, 7 INCH; Rx Insertion Loss: 2.5 dB; Transmit Center Frequency: 782.25 MHz; Height: .95 mm;
ACMD-6207-BLK
DUPLEXER; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; Tx Insertion Loss: 2.4 dB; Height: .825 mm; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE;
ACMD-6107-BLK
DUPLEXER; Maximum Operating Temperature: 85 Cel; Width (mm): 1.6; Dimensions: L2.0XB1.6XH0.825 (mm)/L0.079XB0.063XH0.032 (inch); Mounting Type: SURFACE MOUNT; Rx Insertion Loss: 2.5 dB;
ACMD-6102-TR1
DUPLEXER; Height: .825 mm; Terminal Finish: Gold (Au); Mounting Type: SURFACE MOUNT; Tx Insertion Loss: 2.5 dB; Packing Method: TR;
ACMD-6307-BLK
DUPLEXER; Width (mm): 1.6; Additional Features: TAPE; BAG; Dimensions: L2.0XB1.6XH0.825 (mm)/L0.079XB0.063XH0.032 (inch); Height: .825 mm; Transmit Center Frequency: 2535 MHz;
ACMD-6003-TR1
DUPLEXER; Length: 2.5 mm; Height: .95 mm; No. of Terminals: 9; Additional Features: TAPE AND REEL; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch);
ACMD-6025-BLK
DUPLEXER; Height: .85 mm; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -10 Cel; JESD-609 Code: e4;
ACMD-6125-TR1
DUPLEXER; Height: .825 mm; Rx Insertion Loss: 3.8 dB; Receive Center Frequency: 1962.5 MHz; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
ACMD-6107-TR1
DUPLEXER; Packing Method: TR; Additional Features: TR, 7 INCH; Transmit Center Frequency: 2535 MHz; Tx Insertion Loss: 3 dB; Mounting Type: SURFACE MOUNT;
ACMD-6102-BLK
DUPLEXER; Tx Insertion Loss: 2.5 dB; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -20 Cel; Width (mm): 1.6; Dimensions: L2.0XB1.6XH0.825 (mm)/L0.079XB0.063XH0.032 (inch);
ACMD-6207-TR1
DUPLEXER; Minimum Operating Temperature: -40 Cel; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Packing Method: TR, 7 INCH; Height: .825 mm; Length: 2 mm;
ACMD-6007-TR1
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Height: .95 mm; Packing Method: TR; Additional Features: POWER CAPTURED WITH RESPECT TO -40 TO 85 TEMP RANGE; TAPE AND REEL; Minimum Operating Temperature: -20 Cel;
ACMD-6103
DUPLEXER; Height: .825 mm; JESD-609 Code: e4; Receive Center Frequency: 1842.5 MHz; Terminal Finish: Gold (Au); Width (mm): 1.6;
ACMD-6003-BLK
DUPLEXER; Transmit Center Frequency: 1747.5 MHz; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Receive Center Frequency: 1842.5 MHz; Width (mm): 2.0; No. of Terminals: 9;
ACMD-6007-BLK
DUPLEXER; No. of Terminals: 9; Length: 2.5 mm; Transmit Center Frequency: 2535 MHz; Tx Insertion Loss: 2.1 dB; Height: .95 mm;
ACMD-6125-BLK
DUPLEXER; Height: .825 mm; Length: 2 mm; Maximum Operating Temperature: 100 Cel; Tx Insertion Loss: 4 dB; Transmit Center Frequency: 1882.5 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved