Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK C0603X5R0J333K030BC is a SMT ceramic capacitor with 10% tolerance, X5R temp. characteristics, and 0.033 uF capacitance. Ideal for applications requiring compact surface mount components in a temperature range of -55 to 85°C such as consumer electronics and automotive systems.
Median Price
$0.011
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Bristol Electronics
Vyrian
ACDS - Activité Composants Distribution Service
Quantum Digital Technology
Prism Electronics
Ampacity Inc.
$0.010
Semicontronic
Aranea Global
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
Aztec Data Supply Inc.
$0.200
Corohmni
$0.405
AZTECH Wire
$5.687
Authorized Procurement Solutions
Ceramic is a reliable dielectric material known for its stability and low loss, making this capacitor durable and efficient.
Rectangular package shape allows for efficient use of space on a PCB, making it a compact choice for electronic designs.
Multi-layer construction provides high capacitance values in a small package, making it suitable for applications requiring high capacitance in limited space.
TR packing method ensures safe transportation and storage of capacitors, helping to maintain their quality.
Having 2 terminals simplifies the installation process and ensures proper connectivity in a circuit.
Surface mount technology (SMT) allows for easy and secure mounting of the capacitor on a PCB, saving space and facilitating automated assembly processes.
Wraparound terminals provide a strong connection to the PCB, ensuring reliable performance in various environmental conditions.
A negative tolerance of 10% ensures that the actual capacitance value will not be less than -10% of the specified value, providing a margin of safety in design.
X5R temperature characteristics indicate stable capacitance over a wide temperature range, suitable for applications with varying operating conditions.
With a maximum operating temperature of 85°C, this capacitor can withstand high temperature environments, ensuring reliable performance.
Being a ceramic capacitor, it offers high reliability, stability, and low loss, making it suitable for a wide range of applications.
With a minimum operating temperature of -55°C, this capacitor is suitable for use in extreme cold environments without compromising performance.
A temperature coefficient of 15% indicates minimal change in capacitance with temperature variations, ensuring consistent performance over a wide range of operating temperatures.
Matte tin finish with nickel barrier provides good solderability and corrosion resistance, ensuring reliable connections and long-term performance.
Low profile height of 0.3mm allows for compact design and efficient use of space in electronic circuits.
Narrow width of 0.3mm allows for placement in tight spaces on a PCB, making it suitable for miniaturized electronic devices.
Surface mount design enables easy and secure mounting on the surface of a PCB, simplifying assembly processes and saving space.
Compact length of 0.6mm allows for efficient placement on a PCB without taking up excess space, ideal for miniaturized electronic designs.
A positive tolerance of 10% ensures that the actual capacitance value will not exceed +10% of the specified value, providing a margin of safety in design.
With a capacitance of 0.033 uF, this capacitor is suitable for filtering, coupling, and bypass applications in electronic circuits.
With a rated DC voltage of 6.3V, this capacitor can handle low to moderate voltage levels, making it suitable for various electronic devices and circuits.
Fixed Capacitors C0603X5R0J333K030BC attributes and parameters. Explore more Fixed Capacitors devices from TDK
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
C0603X5R0J333K030BC Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 22/Apr/2016
PCN Part Number - MLCC Part Number Change 30/Nov/2012
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
NXP Semiconductors
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM358N
Harris Semiconductor
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
C0603C104J5RACTU
KEMET Corporation
KEMET C0603C104J5RACTU is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for SMT applications requiring compact size and high reliability. Its multi-layer design and wraparound terminals ensure stable performance in various electronic circuits.
12065C223KAT2A
KYOCERA AVX
12065C223KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.022 uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring compact, high-performance capacitors in surface mount technology.
VJ0603Y104KXXCW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
M39006/22-0360
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0805KKX7R7BB105
Yageo
Yageo's CC0805KKX7R7BB105 is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C0603C102J5GACTU
The KEMET Corporation C0603C102J5GACTU is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. Featuring a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for high precision applications requiring stable performance in varying temperatures. With a compact SMT package style, this fixed capacitor is suitable for surface mount designs in electronic circuits.
C0402C473K4RACAUTO
KEMET C0402C473K4RACAUTO is a ceramic capacitor with 0.047uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and matte tin terminal finish.
C1608X5R1H105K080AB
TDK C1608X5R1H105K080AB is a SMT ceramic capacitor with 1uF capacitance, 10% tolerance, and X5R temperature coefficient. Ideal for surface mount applications in electronics requiring stable performance from -55 to 85°C.
VJ0805Y104KXACW1BC
Vishay Intertechnology's VJ0805Y104KXACW1BC is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic devices.
CGA2B3X7R1H104K050BD
TDK's CGA2B3X7R1H104K050BD is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C1812C681JFGACTU
C1812C681JFGACTU by KEMET Corp is a ceramic capacitor with 0.00068uF capacitance, 1500V URdc, C0G temp code. Ideal for SMT applications with 5% tolerance, -55 to 125 °C operating range. Rectangular package, multi-layer design suitable for various electronic circuits.
C1206F104K1RACTU
C1206F104K1RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 100 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for various applications.
GRM155R60J106ME15D
Murata Manufacturing
Murata Manufacturing's GRM155R60J106ME15D is a ceramic capacitor with 10uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1x0.5x0.5mm) and high reliability with a temperature coefficient of 15%.
C0603C104K4RACTU
KEMET Corporation's C0603C104K4RACTU is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
M39006/22-0350
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM32ER61C476ME15L
Murata Manufacturing's GRM32ER61C476ME15L is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors.
GCM32ER71H475KA55L
Murata Manufacturing's GCM32ER71H475KA55L is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 3.2x2.5x2.5mm.
BFC237035104
Vishay Intertechnology BFC237035104 is a film capacitor with 0.1uF capacitance, rated for 250V DC and 160V AC. It has a rectangular package shape, through-hole mount feature, and is suitable for applications requiring high reliability in automotive electronics.
GRM155R61A104KA01D
Murata Manufacturing's GRM155R61A104KA01D is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and stable performance in various electronic devices.
M39006/25-0072
Vishay Intertechnology's M39006/25-0072 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 486mA ripple current. It is MIL-PRF-39006/25 compliant, suitable for applications requiring high reliability in temperatures ranging from -55 to 125 °C. The polarized capacitor features a tubular package with through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
C0603C103K5RACTU
KEMET C0603C103K5RACTU is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
C0603C104K3RACTU
KEMET C0603C104K3RACTU is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0603C104J4RACTU
KEMET C0603C104J4RACTU is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and high reliability.
C0603C102K5RACTU
KEMET Corporation's C0603C102K5RACTU is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. Ideal for surface mount applications in electronics, it operates b/w -55 to 125 °C with a rated DC voltage of 50 V.
C0603C101J5GACTU
KEMET C0603C101J5GACTU is a ceramic capacitor with 0.0001uF capacitance, 50V URdc, and ±5% tolerance. Ideal for SMT applications with -55 to 125°C operating range, it features C0G temp characteristics and compact 1.6x0.8mm size for various electronic circuits.
C0603C104K5RAC7411
KEMET C0603C104K5RAC7411 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its small size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C0603C104K5RACAUTO7411
KEMET Corporation's C0603C104K5RACAUTO7411 is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
C0603C105K4RACTU
KEMET C0603C105K4RACTU is a ceramic capacitor with 1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C).
C0603C104K8RACTU
KEMET Corporation's C0603C104K8RACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with wraparound terminals.
C0603C105K8PACTU
The KEMET C0603C105K8PACTU is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0603C105K3RACTU
KEMET C0603C105K3RACTU is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact rectangular package shape and multi-layer design.
C0603C103J5RACTU
KEMET C0603C103J5RACTU is a ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for SMT applications due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C). Suitable for various electronic devices requiring stable capacitance in a small form factor.
C0603C223K5RACTU
The KEMET C0603C223K5RACTU is a ceramic capacitor with 0.022uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact rectangular package capacitors.
C0603C104K5RAC3121
C0603C104K5RAC3121 by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C0603C102K5RACAUTO
C0603C102K5RACAUTO by KEMET is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. It is ideal for automotive applications due to its AEC-Q200 standard compliance and 50V rated DC voltage. With SMT package style and compact dimensions of 1.6mm x 0.8mm x 0.8mm, it is suitable for surface mounting in tight spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved