Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK's B72660M0131K072 varistor has a max energy capacity of 9.5J, operating voltage of 170V, and max circuit RMS voltage of 130V. With SMT package style, it is ideal for surge protection in electronics with temp range -40 to 85°C.
Median Price
$0.810
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.453
1k+ parts
$0.404
10k+ parts
-
Mouser Electronics
$0.459
$0.352
Newark
$1.010
$0.787
Distrelec
$1.079
$0.730
Verical
$0.511
Arrow
$0.510
Element14
$0.923
$0.604
$0.562
Farnell
$0.570
$0.458
$0.431
Chip1Stop
$0.554
Nova Conductors
$0.534
VNN
Vyrian
Sensible Micro Corp
Aztec Data Supply Inc.
$0.010
Corohmni
$0.137
Aranea Global
$0.523
$0.502
Argo Parts USA
$0.517
Continental Prestige Electronics
$0.749
$0.525
$0.495
Perfect Parts
Dual ended terminal placement allows for versatile installation options and easy connection to the circuit.
Metal oxide film technology offers high energy absorption capacity and stability under high voltage conditions, making the product reliable and durable.
With a high energy absorbing capacity of 9.5 J, this varistor can effectively protect the circuit from voltage surges and spikes, ensuring equipment safety.
The high maximum operating temperature of 85°C allows the varistor to function reliably in various environmental conditions.
The low minimum operating temperature of -40°C ensures the varistor can operate in cold environments without any issues.
Surface mount design provides easy and secure installation on circuit boards, saving space and facilitating mass production.
Non-linear Resistors B72660M0131K072 attributes and parameters. Explore more Non-linear Resistors devices from TDK
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
B72660M0131K072 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - Mult devs design chg 29/NOV/2019
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Taiwan Semiconductor
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SS14
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bytesonic Electronics
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
RUEF900K-2
Littelfuse
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
B72210-S271-K101
TDK's B72210-S271-K101 varistor has a max energy capacity of 43J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
ERTJ1VT472J
Panasonic
Panasonic ERTJ1VT472J is a 4700 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 4450 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this SMT resistor features dual-ended terminals in a rectangular package.
TRF250-145U
TE Connectivity's TRF250-145U is a PTC resettable fuse with 2 terminals, rated for 60V AC voltage. Its disk package measures 6mm x 3.8mm x 10mm and operates b/w -40°C to 85°C. Ideal for temperature sensing applications with radial terminal placement.
2920L110/60MR
2920L110/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it operates b/w -40 to 85 °C.
PRG18BB101MB1RB
Murata Manufacturing
Murata Manufacturing's PRG18BB101MB1RB is a PTC resettable fuse with 100 ohm resistance, rated for 24V AC. It features dual-ended terminals in a rectangular SMT package, ideal for overcurrent protection applications. With operating temperatures from -20°C to 75°C, it meets CUL and UL standards for reliability.
B72214-S350-K101
The TDK B72214-S350-K101 is a VARISTOR with 10J energy capacity, 35V RMS voltage, and -40 to 85°C operating range. Ideal for surge protection in circuits with 45V operating voltage. RADIAL terminals and DISK PACKAGE make it suitable for THROUGH HOLE MOUNT applications.
0ZCF0100AF2A
Bel Fuse
Bel Fuse's 0ZCF0100AF2A is a PTC resettable fuse with resistance of 0.09 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for temperature sensing applications with dual-ended terminals in a rectangular SMT package.
V20E25P
V20E25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temp of 85°C and -40°C min, it offers protection against voltage spikes up to 31V RMS and DC. Its radial package style makes it ideal for through-hole mounting.
MF-MSMF150/24X-2
Bourns
Bourns MF-MSMF150/24X-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
MF-R090-2
Bourns MF-R090-2 is a PTC resettable fuse with resistance of 0.14 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It has radial terminal placement, wire-shaped terminals, and disk package shape. Ideal for applications requiring overcurrent protection in electronic circuits.
B72207-S301-K101
The TDK B72207-S301-K101 is a VARISTOR with 300V max RMS voltage and 23J energy absorption. Suitable for applications requiring protection against voltage surges, it has a radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85°C, making it ideal for various electronic devices.
SMD030F-2
TE Connectivity's SMD030F-2 is a PTC resettable fuse with a resistance of 4.8 ohm and rated AC voltage of 60V. It is commonly used for temperature sensing applications, with dimensions of 7.98mm x 5.44mm x 3.18mm and an operating temperature range of -40 to 85 °C.
MICROSMD050F-2
TE Connectivity's MICROSMD050F-2 is a PTC resettable fuse with 2 terminals, rated for 13.2V AC voltage and 0.8W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminal placement in a rectangular package suitable for surface mounting at up to 85°C operating temperature.
B72220S3271K101
B72220S3271K101 by TDK is a VARISTOR with 260J energy capacity, 350V operating voltage, and 275V RMS circuit voltage. It has radial terminal placement and metal oxide film technology. Ideal for surge protection in applications requiring high energy absorption and voltage regulation.
NANOSMDC010F-2
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
55002
Ysi
NTC THERMISTOR; No. of Terminals: 2;
RF1403-000
TE Connectivity's RF1403-000 is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection applications, it features SMT package style, matte tin over nickel terminal finish, and CSA/TUV/UL reference standards.
0ZCM0010FF2G
Bel Fuse's 0ZCM0010FF2G is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 15V, and max circuit DC voltage of 15V. It is designed for non-linear resistor applications in automotive electronics due to its AEC-Q200 compliance and wide temperature range from -40°C to 85°C.
Z250PA40C
Hv Component Associates
VARISTOR; Mounting Type: CHASSIS MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 250 V; Minimum Operating Temperature: -40 Cel; Terminal Shape: LUG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B72650M0131K072
B72650M0131K072 by TDK is a non-linear resistor with a max energy absorbing capacity of 4.2 J. It is a metal oxide film varistor that can operate at temperatures ranging from -40 to 85 °C. This surface mount varistor has a max circuit RMS voltage of 130 V and is commonly used for surge protection in electronic devices.
B72660M0171K072
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Package Style (Meter): DO-214var; Operating Voltage: 225 V;
B72650M0271K072
TDK's B72650M0271K072 is a METAL OXIDE FILM VARISTOR with 8.6J energy capacity, 275V RMS voltage, and 350V operating voltage. Ideal for surge protection in electronics, it has DUAL terminals and operates b/w -40°C to 85°C in surface mount applications.
B72650-M271-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 275 V; Minimum Operating Temperature: -40 Cel;
B72650M0301K072
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL; Terminal Shape: J BEND;
B72650-M301-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Placement: DUAL;
B72660M0271K072
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 275 V; Maximum Circuit DC Voltage: 350 V;
B72660-M271-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL; No. of Terminals: 2;
B72660M0301K072
B72660M0301K072 by TDK is a varistor with 23J energy capacity, 385V operating voltage, and -40 to 85°C temperature range. It's a surface mount device with dual terminals in a DO-214var package, ideal for surge protection in electronic circuits.
B72660-M300-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Maximum Energy Absorbing Capacity: 2 J;
B72660-M301-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 300 V; No. of Terminals: 2;
B72660M0300K072
B72660M0300K072 by TDK is a non-linear resistor with a max energy absorbing capacity of 2 J. It is a metal oxide film varistor that can operate at temperatures ranging from -40 to 85 °C. This surface mount varistor is commonly used for circuit protection in various electronic applications.
B72660-M500-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 65 V;
B72660-M1300-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; Maximum Energy Absorbing Capacity: 2000 J; Operating Voltage: 34 V;
B72660-M250-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Maximum Energy Absorbing Capacity: 1.6 J;
B72660M0131K093
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit RMS Voltage: 130 V;
B72660-M131-K72
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 130 V; Terminal Finish: TIN OVER NICKEL;
B72660M0600S172
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Technology: METAL OXIDE FILM; Minimum Operating Temperature: -40 Cel;
B72660M0950S172
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR, BLISTER, 13 INCH; Terminal Shape: J BEND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved