Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B72520T0300K062 by TDK is a VARISTOR with 30V max circuit RMS voltage and 1.1J energy absorbing capacity. It has dual-ended terminals, SMT package style, and operates b/w -55°C to 150°C. Ideal for surge protection in electronic circuits requiring high reliability and compact design.
Median Price
$0.432
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.330
100+ parts
$0.173
1k+ parts
$0.145
10k+ parts
-
Arrow
$0.534
$0.313
$0.161
Mouser Electronics
$0.560
$0.345
$0.246
$0.184
Bürklin Elektronik
$0.620
$0.320
$0.228
TTI Europe
Newark
$0.187
$0.160
Farnell
$0.263
$0.130
Element14
$0.651
$0.360
$0.269
Verical
$0.298
$0.231
Distrelec
Nova Conductors
$0.214
TME
$0.940
$0.401
$0.238
Cyclops Electronics Ltd
Vyrian
Chip Stock
LIBRA Elektronik GmbH
PC Components Company LLC
Bristol Electronics
LWI Electronics Inc
VNN
Semicontronic
$0.127
$0.126
Corohmni
$0.163
Aranea Global
$0.209
$0.201
Argo Parts USA
$0.207
Aztec Data Supply Inc.
$0.462
Andel Nordic
$6.063
$5.820
GreenTree Electronics
$0.100
Perfect Parts
Continental Prestige Electronics
$0.242
$0.172
$0.135
Infinite Electronics LLP (Excess)
Robosynatics
$0.035
$0.032
Lucentia Tech
Dual-ended terminal placement allows for easy connection in various circuit configurations, providing flexibility and convenience.
High energy absorbing capacity makes this varistor suitable for applications where protection against transient voltage spikes is essential.
Having only 2 terminals simplifies the installation process and reduces the chances of wiring errors.
With a high maximum operating temperature, this varistor can withstand harsh environmental conditions without sacrificing performance.
Being a varistor, this product is designed to protect sensitive electronic components from voltage surges, making it an essential part of any circuit requiring overvoltage protection.
Surface mount packaging allows for easy and efficient installation on PCBs, saving space and simplifying assembly processes.
Non-linear Resistors B72520T0300K062 attributes and parameters. Explore more Non-linear Resistors devices from TDK
Additional Features:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
B72520T0300K062 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Continental Device India
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Temic Semiconductors
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
TO103J2K
Us Sensor
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %; No. of Terminals: 2;
NTCG103JF103FT1H
TDK
NTCG103JF103FT1H by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 175°C max operating temp. Ideal for temperature sensing in automotive electronics due to AEC-Q200 standard compliance and high thermal sensitivity index of 3453 K.
B57364-S109-M
B57364-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2800K and can operate b/w -55°C to 170°C. Ideal for soft start applications due to its radial terminal placement in disk package.
RUEF250-AP
RUEF250-AP by TE Connectivity is a PTC resettable fuse with resistance of 0.07 ohm, rated power dissipation of 1.2W, and URac of 30V. It is used for temperature sensing applications with radial terminal placement in a rectangular package. Operating temperatures range from -40 to 85°C making it suitable for various electronic devices.
MINISMDC150F/24-2
TE Connectivity's MINISMDC150F/24-2 is a PTC resettable fuse with resistance of 0.12 ohm and rated AC voltage of 24 V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.94mm, it operates b/w -40 to 85 °C and conforms to UL, CSA, TUV standards.
2016L030DR
Littelfuse
2016L030DR by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm, operating voltage of 60V, and dual-ended terminals. It is used for overcurrent protection in surface mount applications. Dimensions are 5.44mm x 4.43mm x 1.25mm with a max operating temperature of 85°C and min of -40°C.
V275LA20APW
V275LA20APW by Littelfuse is a VARISTOR with 275V max circuit RMS voltage, 75J energy capacity, and -55 to 125 °C operating temp. Ideal for surge protection in various applications due to its METAL OXIDE technology and THROUGH HOLE MOUNT design.
MPTS2920L150
Meritek Electronics
MPTS2920L150 by Meritek Electronics is a PTC thermistor with 1.5W power dissipation, operating b/w -40°C to 85°C. It features dual-ended terminals in a rectangular package for temperature sensing applications. The thermistor has pure tin terminal finish and is surface mountable for easy installation.
ERTJ0ES104F
Panasonic
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
TRF250-180
TE Connectivity's TRF250-180 is a PTC resettable fuse with 4 ohm resistance and rated power dissipation of 1.5W. Ideal for temperature sensing applications, it has radial terminal placement in a disk package, dimensions of 9mm x 3.8mm x 12mm, and operates b/w -40°C to 85°C.
ASMD100F-2
TE Connectivity's ASMD100F-2 is a PTC resettable fuse with 0.098 ohm resistance, 30V operating voltage, and -40 to 85°C temperature range. It features dual-ended terminals for overcurrent protection in surface mount applications. AEC-Q200 and TS 16949 compliant, it offers reliable circuit protection in compact SMT packages.
RXEF025-2
TE Connectivity's RXEF025-2 is a PTC resettable fuse with 1.25 ohm resistance and rated power dissipation of 0.45 W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and disk package shape, it offers URac of 72 V for through hole mounting.
EZJZ0V220HA
The Panasonic EZJZ0V220HA is a VARISTOR resistor with dual-ended terminals, suitable for surface mount applications. It has a max operating temperature of 85°C and can handle an operating voltage of 13V. With a rectangular package style and wraparound terminals, it is ideal for circuit protection in various electronic devices.
0ZCM0003FF2G
Bel Fuse
Bel Fuse's 0ZCM0003FF2G is a PTC resettable fuse with 6 ohm resistance, operating voltage of 30V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and wide temperature range (-40 to 85 °C). Package style is SMT with matte tin finish, suitable for surface mounting.
RUEF400K-AP
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
RXEF020S
TE Connectivity's RXEF020S is a PTC resettable fuse resistor with a rated AC voltage of 72V. It is used for temperature sensing applications and has a max operating temperature of 85°C. Its terminal placement is radial, and it comes in a disk package shape.
RXEF010-AP
TE Connectivity's RXEF010-AP is a PTC resettable fuse with 7.5 ohm resistance and rated power dissipation of 0.38W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, featuring radial terminal placement in disk package shape.
PS103J2
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .03 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %;
B72214-S251-K101
The TDK B72214-S251-K101 is a VARISTOR with 65J energy capacity, rated for 250V AC and 320V DC. With METAL OXIDE FILM tech, it operates b/w -40°C to 85°C. Ideal for surge protection in circuits requiring high voltage tolerance.
MICROSMD075F-2
TE Connectivity's MICROSMD075F-2 is a PTC resettable fuse with a rated AC voltage of 6V. Featuring dual-ended terminals and a rectangular package, it is ideal for temperature sensing applications. With a max operating temperature of 85°C, this surface-mount thermistor offers reliable protection in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B72530T0300K062
The TDK B72530T0300K062 is a VARISTOR with 2J energy capacity, 30V RMS voltage, and -55 to 150°C operating range. Ideal for surge protection in SMT applications due to its dual-ended terminals and compact rectangular package design.
B72520T0250K062
B72520T0250K062 by TDK is a VARISTOR with 25V max circuit RMS voltage and 1J max energy absorption. It has DUAL ENDED terminals, SMT package style, and operates b/w -55 to 150 °C. Ideal for surge protection in electronics applications.
B72500D0050A060
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, CARDBOARD, 7 INCH; Operating Voltage: 5.6 V; Length (Package): 1.75 mm;
B72580E0250K062
B72580E0250K062 by TDK is a varistor with 25V max RMS voltage and 31V operating voltage. It has a rated temperature of 150°C, metal oxide film technology, and can absorb up to 3.7J energy. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and high energy absorption capacity.
Epcos Ag
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .015 W; No. of Terminals: 2; Maximum Circuit DC Voltage: 31 V; Maximum Energy Absorbing Capacity: 3.7 J;
B72540T6500K062
B72540T6500K062 by TDK is a VARISTOR with a max operating temperature of 150°C and a rated power dissipation of 0.02W. It is commonly used in non-linear resistor applications to protect circuits from excessive voltage spikes.
B72580V0600K062
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .015 W; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Maximum Circuit DC Voltage: 85 V;
B72520T0350K062
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .008 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e3; Maximum Energy Absorbing Capacity: .4 J;
B72520T0500K062
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .008 W; Maximum Operating Temperature: 150 Cel; Shape (Package): RECTANGULAR PACKAGE; Operating Voltage: 65 V;
B72500D0150A060
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Operating Voltage: 15 V; Height (Package): .9 mm; Terminal Shape: WRAPAROUND;
B72510E0250K062
B72510E0250K062 by TDK is a varistor with 25V max circuit RMS voltage and 0.3J energy absorption. It operates b/w -55°C to 175°C, suitable for surge protection in automotive electronics due to AEC-Q200 compliance. With a chip package style, it offers surface mounting type and dual-ended terminals for efficient installation.
B72500D0090A060
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): .9 mm; Height (Package): .9 mm; Maximum Circuit DC Voltage: 9 V;
B72500D0300H060
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 30 V; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
B72510T0250K062
The TDK B72510T0250K062 is a varistor with max. circuit RMS voltage of 25V and energy capacity of 0.3J. It operates b/w -55 to 150°C, suitable for surge protection in SMT applications. Its dual-ended terminals and compact rectangular package make it ideal for surface mount designs.
B72500D0160H060
VARISTOR;
B72520T0400K062
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .008 W; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Operating Voltage: 56 V;
B72580T6131K072
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .015 W; Maximum Operating Temperature: 85 Cel; Additional Features: STANDARD: IEC-61000-4-5; Shape (Package): RECTANGULAR PACKAGE;
B72530T0110K062
B72530T0110K062 by TDK is a VARISTOR with a max energy absorbing capacity of 1.2 J. It has a dual-ended terminal placement and comes in a rectangular package with dimensions of 3.2mm x 2.5mm x 1.7mm. This varistor is suitable for applications requiring protection against voltage surges or transients.
B72540E0250K062
B72540E0250K062 by TDK is a varistor with 25V RMS and 31V DC operating voltage, offering 9.6J energy absorption. It features dual-ended terminals in a rectangular chip package for surface mount applications, meeting AEC-Q200 standards. Ideal for protecting circuits from voltage surges in automotive and industrial electronics.
B72520T0170K062
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .008 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved