Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK B59985-C120-A70 is a PTC thermistor with 4.6 ohm resistance and 25% tolerance. It is used for overload protection in applications requiring a rated AC voltage of 24V. Featuring radial terminal placement, this disk package thermistor has a temperature range from -40°C to 125°C.
Median Price
$0.477
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.455
1k+ parts
$0.433
10k+ parts
-
Chip1Stop
$0.839
$0.537
$0.530
Verical
Nova Conductors
$0.635
IBS Electronics
$0.281
ComSIT Distribution GmbH
VNN
Vyrian
Connector Distribution Corp
Right Parts Inc.
LIBRA Elektronik GmbH
ECAB
Huijzer Components
Continental Prestige Electronics
$0.622
Netroflash
Argo Parts USA
$0.616
Abacus Technologies
Glotronic Ltd.
GreenTree Electronics
Eastek
FE SAS
Assy Fe
OVERLOAD PROTECTION - Provides added safety by detecting and limiting excessive current flow.
RADIAL - Allows for easy mounting and soldering on circuit boards.
DISK PACKAGE - Provides a compact and durable housing for the thermistor.
STRIP PACK - Convenient packaging for easy storage and handling.
4.6 ohm - Ideal resistance value for effective overload protection.
2 - Simple and easy to connect in a circuit.
24 V - Suitable for a wide range of applications.
WIRE - Easy to connect with other components.
125 °C - Can withstand high temperature environments.
40 °C - Can operate in low temperature conditions.
Tin (Sn) - Provides corrosion resistance for long-term reliability.
PTC THERMISTOR - Offers positive temperature coefficient for self-regulating behavior.
25 % - Provides flexibility in resistance values within the specified range.
THROUGH HOLE MOUNT - Secure and stable mounting on PCBs.
Non-linear Resistors B59985-C120-A70 attributes and parameters. Explore more Non-linear Resistors devices from TDK
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated AC Voltage (URac):
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Tolerance:
B59985-C120-A70 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
EU2B-YS303C
Idec
ROTARY SWITCH;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Leshan Radio
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LL4148
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Uniohm
V5.5MLA0603NHX2888
Littelfuse
V5.5MLA0603NHX2888 by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has dual-ended terminals, matte tin finish, and operates b/w -55°C to 150°C. Ideal for surface mount applications requiring protection against voltage surges in electronic circuits.
RUEF250
TE Connectivity
TE Connectivity's RUEF250 is a PTC resettable fuse with resistance of 0.07 ohm and rated power dissipation of 1.2W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85°C.
NTCS0603E3222FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
RXEF250
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): 3 mm; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
MINISMDC010F-2
MINISMDC010F-2 by TE Connectivity is a PTC resettable fuse with resistance of 0.7 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals and SMT package style. With a compact size of 4.73mm x 3.41mm x 0.89mm, it operates b/w -40°C to 85°C as per CSA, TUV, and UL standards.
TFPT1206L6201JV
Vishay Intertechnology's TFPT1206L6201JV is a PTC thermistor with 6200 ohm resistance, 5% tolerance, and 0.125 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating temperature ranges from -55°C to 150°C making it suitable for diverse environments.
RF2577-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): .22 W; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE RANGE(MIN-MAX): 7.3-11.1;
0603ESDA-MLP7
Eaton Corporation
0603ESDA-MLP7 by Eaton Corp is a VARISTOR with 30V operating voltage. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and SMT package style. Ideal for AEC-Q200 compliant applications requiring surge protection in automotive electronics.
PFRA.110
Schurter Ag
Schurter Ag's PFRA.110 is a PTC resettable fuse with resistance of 0.1 ohm and rated AC voltage of 40V. Its cylindrical package, radial terminal placement, and through hole mounting make it ideal for overcurrent protection in various electronic applications.
RXEF110K
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 0.15-0.25 OHMS AT 20 DEG CEL; Terminal Placement: RADIAL; Minimum Operating Temperature: -40 Cel;
TE Connectivity's RXEF250 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, with radial terminal placement in disk package shape.
1206L016WR
1206L016WR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 30V, ideal for overcurrent protection applications. Featuring dual-ended terminals and surface mounting type, it has a compact package style (SMT) with dimensions of 3.4mm x 1.8mm x 1.45mm (LxWxH). Compliant with CUL, TUV, and UL standards, it operates b/w -40°C to 85°C temperature range.
NTC0805J10K
TE Connectivity's NTC0805J10K is a 10000 ohm NTC thermistor with -55 to 125 °C operating range and 5% tolerance. It has dual-ended terminals, measures 2mm x 1.25 x 0.5mm, and is used for temperature sensing applications in surface mount configurations.
V130LA5P
V130LA5P by Littelfuse is a varistor with rated AC voltage of 130V and max energy absorption of 20J. It is used for temperature compensation applications, featuring metal oxide film technology and radial terminal placement. With a package style of disk shape, it operates b/w -55°C to 125°C temperatures.
NTCS0603E3473FHT
Vishay Intertechnology's NTCS0603E3473FHT is a NTC thermistor with 47000 ohm resistance, 1% tolerance, and 3960 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL certifications.
V5.5MLA0603H23
VARISTOR;
RUEF135-2
TE Connectivity's RUEF135-2 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and rectangular package shape, it offers reliable protection at rated AC voltage of 30V.
MF-SM075-2-99
Bourns
The Bourns MF-SM075-2-99 is a PTC resettable fuse with 1 ohm resistance and 30V operating voltage. It is used for overload protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and meets CSA, TUV, and UL standards.
MF-R090-0-99
Bourns MF-R090-0-99 is a PTC resettable fuse with 60V operating voltage. It offers overcurrent protection in radial package shape for through-hole mounting. With -40 to 85°C temp range, matte tin finish, and CUL/TUV/UL standards, it's ideal for various applications.
MICROSMD110F-2
TE Connectivity's MICROSMD110F-2 is a PTC resettable fuse with 2 terminals, rated for 6V AC voltage and 0.8W power dissipation. It is designed for temperature sensing applications, featuring dual-ended terminal placement in a rectangular surface mount package, suitable for use up to 85°C operating temperature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B59950C0120A070
TDK
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 3.7 ohm; Maximum Operating Temperature: 125 Cel; Rated AC Voltage (URac): 63 V; Maximum Circuit RMS Voltage: 80 V;
B59960C0080A070
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5.6 ohm; Maximum Operating Temperature: 125 Cel; Packing Method: CARDBOARD; Rated AC Voltage (URac): 63 V;
B59955C0120A070
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: .8 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Shape (Package): DISK PACKAGE;
B59980-C80-A70
Siemens
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Rated AC Voltage (URac): 80 V; Thermistor Application: OVERLOAD PROTECTION; Shape (Package): DISK PACKAGE;
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; No. of Terminals: 2;
B59965C0120A070
The TDK B59965C0120A070 is a PTC thermistor with 1.2 ohm resistance and 25% tolerance. It is used for overcurrent protection in applications requiring a rated AC voltage of 30V. With radial terminal placement, it operates b/w -40°C to 125°C, making it suitable for through-hole mounting.
B59965-C120-A70
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.2 ohm; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2;
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.2 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Terminal Shape: WIRE;
B59990-C120-A70
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 55 ohm; Rated AC Voltage (URac): 80 V; Terminal Shape: WIRE; No. of Terminals: 2;
B59990-C120-A70 by TDK is a PTC thermistor with 55 ohm resistance, rated for 125°C. It is used for overload protection in applications requiring radial terminal placement and disk package shape. With a tolerance of 25%, it operates b/w -40°C to 125°C and has a rated AC voltage of 63V.
B59980C0120A070
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; Package Style (Meter): Radial;
B59990C0120A051
Epcos Ag
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 55 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Terminal Finish: Tin (Sn);
B59980C0080A070
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Maximum Circuit RMS Voltage: 80 V;
B59980-C120-A70
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Rated AC Voltage (URac): 63 V;
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Rated AC Voltage (URac): 80 V;
B59945-C160-A70
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: .45 ohm; Rated AC Voltage (URac): 20 V; Terminal Shape: WIRE; Shape (Package): DISK PACKAGE;
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: .45 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Rated AC Voltage (URac): 12 V;
B59901-D70-A40
The TDK B59901-D70-A40 is a PTC thermistor with a resistance of 570 ohm. It is used for temperature sensing applications and has a max operating temperature of 93°C. The thermistor has radial terminal placement and is mounted through hole.
PTC THERMISTOR; Mounting Type: CHASSIS MOUNT; No. of Terminals: 2; Additional Features: PCB MOUNTABLE; Shape (Package): SPECIAL PACKAGE; Rated AC Voltage (URac): 30 V;
B59945C0120A070
B59945C0120A070 by TDK is a PTC thermistor with resistance of 0.45 ohm, rated for 30V AC/DC. It is used for overcurrent protection in radial disk package with through-hole mounting, operating from -40 to 125°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved