Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's MICROSMD110F-2 is a PTC resettable fuse with 2 terminals, rated for 6V AC voltage and 0.8W power dissipation. It is designed for temperature sensing applications, featuring dual-ended terminal placement in a rectangular surface mount package, suitable for use up to 85°C operating temperature.
Median Price
$0.389
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.500
100+ parts
$0.354
1k+ parts
$0.271
10k+ parts
$0.197
Newark
$0.543
$0.338
$0.268
$0.257
DigiKey
$0.600
$0.270
-
Master Electronics
$0.352
Future Electronics
$0.230
Verical
$0.377
TTI
$0.447
Farnell
$0.200
$0.191
$0.181
Chip1Stop
$0.179
$0.138
Element14
$23.800
$20.090
$19.580
Arrow
$0.306
$0.231
Nova Conductors
$0.208
TEDSS.com
$0.350
$0.280
Component Electronics Inc.
$0.260
Cyclops Electronics Ltd
American Connector Supply Corp
Prism Electronics
NAC Semi
$0.418
IBS Electronics
$0.345
Lantek
R&J Components
Avant Electronics Limited
M&R Communications
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
ComSIT USA
Odi Ramu Company
Bristol Electronics
Semtec, LLC
ACDS - Activité Composants Distribution Service
Component Stockers USA
$0.060
$0.040
$0.170
Semicontronic
$0.067
$0.065
Aztec Data Supply Inc.
$0.154
Bastille Electronics
$0.198
$0.188
$0.185
Argo Parts USA
$0.202
CoreStaff
$0.413
$0.212
$0.159
Corohmni
$0.889
Perfect Parts
Kepictronics
Metaverse IC Inc.
Authorized Procurement Solutions
Futuretech Components
Assy Fe
GreenTree Electronics
Continental Prestige Electronics
$0.227
$0.166
Temperature sensing application allows for accurate monitoring and control of temperature in various devices or systems.
Dual ended terminal placement provides flexibility in circuit design and allows for easy installation.
Rectangular package shape enables efficient and space-saving placement on circuit boards.
TR packing method ensures convenient handling during storage and transportation.
Rated AC voltage of 6V indicates compatibility with standard AC voltage requirements.
One surface terminal shape simplifies installation and connection to other components in the circuit.
Maximum operating temperature of 85°C provides reliability in high temperature environments.
PTC resettable fuse resistor type offers protection against overcurrent and short circuits, ensuring safety in the circuit.
Surface mounting type allows for easy and secure attachment to the circuit board.
Rated power dissipation of 0.8W indicates the capability to handle power efficiently without overheating.
Non-linear Resistors MICROSMD110F-2 attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Shape (Package):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Resistor Type:
Terminal Placement:
Terminal Shape:
Thermistor Application:
MICROSMD110F-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
L7805CV
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1206L300SLTHYR
Littelfuse
1206L300SLTHYR by Littelfuse is a PTC resettable fuse with 0.003 ohm resistance and 6V operating voltage. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and TR packing method, it operates b/w -40°C to 85°C.
B72214S0301K101
TDK
The TDK B72214S0301K101 is a VARISTOR with 300V max circuit RMS voltage and 385V operating voltage. With a max energy absorption of 76J, it's ideal for surge protection in applications requiring high reliability and durability. The radial package style and through-hole mounting make it suitable for various electronic circuits.
ES110-0001
Honeywell Sensing And Control
ES110-0001 by Honeywell Sensing And Control is a NTC thermistor with 2000 ohm resistance, 5% tolerance, and thermal sensitivity index of 3468 K. It is used for temperature sensing applications in a rectangular package with panel mount terminal shape. Operating temperatures range from -40 to 150 °C.
ZNI1000TA
Diodes Incorporated
ZNI1000TA by Diodes Inc. is a PTC thermistor with 1141 ohm resistance, rated power dissipation of 0.02W, and max operating temp of 150°C. Ideal for temperature compensation applications in surface mount configurations.
NTCS0603E3222FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MINISMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
V82ZA20PX10
Littelfuse V82ZA20PX10 varistor has a rated temp of 85°C, max operating temp of 125°C, and min operating temp of -55°C. It is a metal oxide film technology varistor with radial terminal placement for surge protection applications.
MINISMDC075F/24
TE Connectivity
MINISMDC075F/24 by TE Connectivity is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications. With an operating temperature range from -40°C to 85°C, it is ideal for surface mounting methods.
CL-60
Amphenol
The Amphenol CL-60 is a NTC thermistor with 10 ohm resistance and 25% tolerance. It is designed for overload protection applications, featuring radial terminal placement and disk package shape. With a thermal sensitivity index of 888 K, it operates b/w -50 to 175 °C effectively.
NTCS0603E3103JHT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103JHT is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3960 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL certifications.
NANOSMDC150F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Package Style (Meter): SMT;
GA5K3A1A
TE Connectivity's GA5K3A1A is a non-linear resistor with 2 terminals, operating from -40 to 125 °C. With a length of 76mm, it is ideal for temperature sensing applications.
60R185XMR
60R185XMR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. The thermistor has a max operating temperature of 85°C and min of -40°C, meeting CUL, TUV, and UL standards.
B57703-M103-G40
B57703-M103-G40 by TDK is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 3988 K thermal sensitivity index. It is used for temperature sensing applications with a rated temperature range of -55 to 125 °C. The thermistor has a chassis mount design with radial terminal placement and flexible wire terminals.
MICROSMD150F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Shape (Package): RECTANGULAR PACKAGE;
MF-MSHT110KX-2
Bourns
Bourns MF-MSHT110KX-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 16V, and max temperature of 125°C. It is used for overcurrent protection in various applications such as automotive electronics and power supplies.
RF1347-000
PTC RESETTABLE FUSE;
RF1353-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 13.2 V;
MF-R050
The Bourns MF-R050 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It comes in a radial disk package for through-hole mounting applications. Ideal for overcurrent protection in various electronic devices.
NCP18XQ102J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MICROSMD050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Operating Voltage: 13.2 V;
TE Connectivity's MICROSMD050F-2 is a PTC resettable fuse with 2 terminals, rated for 13.2V AC voltage and 0.8W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminal placement in a rectangular package suitable for surface mounting at up to 85°C operating temperature.
MICROSMD010F-2
TE Connectivity's MICROSMD010F-2 is a PTC resettable fuse with 30V URac. Its dual-ended terminals and rectangular package make it suitable for temperature sensing applications. With a max operating temperature of 85°C, it is designed for surface mounting.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.1 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 30 V; Operating Voltage: 30 V;
MICROSMD005F-2
TE Connectivity's MICROSMD005F-2 is a PTC resettable fuse with dual-ended terminals, suitable for temperature sensing applications. With a max operating temperature of 85°C and operating voltage of 30V, this surface mount device comes in a compact rectangular package measuring 3.2mm x 2.5mm x 0.85mm. It meets reference standards such as CSA, TUV, and UL for reliable performance in various electronic circuits.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.6 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: CSA; TUV; UL; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
MICROASMD050F-2
MICROASMD050F-2 by Littelfuse is a PTC resettable fuse with a resistance of 0.25 ohm and operating voltage of 13.2V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mounting type.
MICROSMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 6 V; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
TE Connectivity's MICROSMD075F-2 is a PTC resettable fuse with a rated AC voltage of 6V. Featuring dual-ended terminals and a rectangular package, it is ideal for temperature sensing applications. With a max operating temperature of 85°C, this surface-mount thermistor offers reliable protection in various electronic devices.
TE Connectivity's MICROSMD150F-2 is a PTC resettable fuse with a rated AC voltage of 6V and max operating temp of 85°C. It features dual-ended terminals in a rectangular package, ideal for temperature sensing applications using surface mounting method.
MICROSMD110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Packing Method: TR, EMBOSSED, 7 INCH;
MICROSMD035F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .32 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 6 V; Thermistor Application: OVERCURRENT PROTECTION;
TE Connectivity's MICROSMD035F-2 is a PTC resettable fuse with a rated AC voltage of 6V and max operating temp of 85°C. It features dual-ended terminals in a rectangular package, ideal for temperature sensing applications using surface mounting method.
MICROSMD010-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Minimum Operating Temperature: -40 Cel; Terminal Placement: DUAL ENDED;
MICROASMDCH110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 125 Cel; Additional Features: RMIN AT 25 DEG CEL; Packing Method: TR, EMBOSSED, 7 INCH;
MICROSMD010F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Shape (Package): RECTANGULAR PACKAGE; Terminal Shape: ONE SURFACE; JESD-609 Code: e3; Additional Features: 2.1 TO 15 OHMS AT 20 DEG CEL;
MICROASMD010F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.1 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Width (Package): 2.8 mm;
MICROASMDCH125F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .03 ohm; Maximum Operating Temperature: 125 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Package Style (Meter): SMT;
MICROSMD200F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: ONE SURFACE; Additional Features: MINIMUM RESISTANCE IS 0.02 OHMS.; Shape (Package): RECTANGULAR PACKAGE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved