Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B32916A3685M000 by TDK is a film capacitor with 6.8uF capacitance and rated DC voltage of 760V. It features a polypropylene dielectric material, rectangular package shape, and terminal finish in matte tin. Ideal for applications requiring a fixed capacitor with UL, CSA, IEC60384-14 standards compliance.
Median Price
$10.950
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Ampacity Inc.
$0.010
Continental Prestige Electronics
$10.731
AZTECH Wire
$14.353
Argo Parts USA
Polypropylene is known for its excellent insulation properties, making this capacitor reliable and efficient in storing and releasing electrical energy.
This high AC voltage rating ensures the capacitor can handle varying electrical loads without getting damaged, improving the longevity of the product.
With a capacitance of 6.8 uF, this capacitor can store a moderate amount of electrical charge, suitable for various applications in circuits.
The high DC voltage rating of 760 V makes this capacitor suitable for applications where stable voltage levels are required, ensuring reliable performance.
Fixed Capacitors B32916A3685M000 attributes and parameters. Explore more Fixed Capacitors devices from TDK
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated AC Voltage (URac):
Rated DC Voltage (URdc):
Reference Standard:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
Width:
B32916A3685M000 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.70
SB
PCN Design/Specification - B32(5679)B333 Series 02/May/2014
PCN Packaging - MKT, MKP Type Laser Marking 26/Apr/2013
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
CDSOT23-SM712
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semitronics
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
International Devices
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LL4148
Excel (Suzhou) Semiconductor
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
562R10TSD10
Vishay Intertechnology
Vishay Intertechnology's 562R10TSD10 is a ceramic capacitor with 0.001 uF capacitance and 1000 V rated DC voltage. With a temperature coefficient of 7.5% and -55 to 105 °C operating range, it suits applications requiring stable performance in varying conditions. The radial package style and matte tin over nickel finish make it ideal for through hole mounting in electronic circuits.
C1206C105K3RACTU
KEMET Corporation
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C0603C222K5RACTU
KEMET C0603C222K5RACTU is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
UUX2A470MNL1GS
Nichicon
Nichicon UUX2A470MNL1GS is a 47uF aluminum electrolytic capacitor with 100V URdc. It features low tan delta of 0.08 and high ripple current of 230mA, suitable for automotive applications meeting AEC-Q200 standard.
GRT188R61H105KE13D
Murata Manufacturing
Murata Manufacturing's GRT188R61H105KE13D is a ceramic capacitor with 1uF capacitance, X5R temperature characteristics, and 50V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 standard compliance and compact SMT package design.
M39006/22-0377
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CKG57NX7S2A226M500JH
TDK
CKG57NX7S2A226M500JH by TDK is a ceramic capacitor with 22uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring high reliability in a compact SMT package. Its J bend terminal shape and matte tin finish offer ease of installation and durability.
ESG475M400AH2AA
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
04023C104KAT2A
KYOCERA AVX
04023C104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance, 25V URdc, X7R temp characteristics, and -55 to 125°C operating range. Ideal for compact electronic devices requiring stable capacitance in harsh environments.
06033D104KAT2A
06033D104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
C1206C471J5GACTU
KEMET C1206C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style and matte tin finish, it is ideal for surface mount installations in various electronic devices.
C0603C104K5RAC3121
C0603C104K5RAC3121 by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
CGA5L1X7R1E106K160AE
TDK's CGA5L1X7R1E106K160AE is a ceramic capacitor with 10uF capacitance, 25V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2x1.6x1.6mm size.
CL21C221JBANNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL21C221JBANNNC is a ceramic capacitor with capacitance of 0.00022uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high precision and stability in various electronic circuits.
EEEFK1H221P
Panasonic
Panasonic EEEFK1H221P is a 220uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 502.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
CL10C470JB8NNNC
CL10C470JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.000047uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance across temperatures. With a compact SMT package style, it is ideal for surface mounting in various electronic devices.
EEEFK1V331P
Panasonic EEEFK1V331P is a 330uF Aluminum Electrolytic Capacitor with 35V URdc. It features Tan Delta of 0.12, Leakage Current of 0.1155mA, and Ripple Current of 637.5mA. Ideal for applications requiring high capacitance and low leakage current in a compact SMT package design.
M39006/220377
Cornell Dubilier Electronics
M39006/220377 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with 68uF capacitance, 60V rated DC voltage, and 0.13 Tan Delta. It is polarized, has a leakage current of 0.002mA, and operates b/w -55 to 125 °C. Ideal for applications requiring high ripple current handling in military-grade electronics per MIL-C-39006/22 standard.
CGA5L3X5R1H106K160AB
TDK's CGA5L3X5R1H106K160AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X5R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and compact 3.2x1.6x1.6mm size for surface mounting feature.
UMK107BJ105KA-T
Taiyo Yuden
UMK107BJ105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, 10% negative tolerance, and 15% temp coef. Ideal for SMT applications, this rectangular package measures 1.6mm x 0.8mm x 0.8mm and operates b/w -55°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B32921C3104M189
B32921C3104M189 by TDK is a film capacitor with capacitance of 0.1uF, rated DC voltage of 630V, and rated AC voltage of 310V. It is used in applications requiring a fixed capacitor with polypropylene dielectric material, such as power supplies and industrial electronics due to its high operating temperature range (-40 to 110 °C) and compact rectangular package design for through-hole mounting.
B32922C3474M189
B32922C3474M189 by TDK is a film capacitor with 0.47 uF capacitance, rated for 630V DC and 310V AC. With a temperature range of -40 to 110 °C, it's ideal for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
B32922C3104M189
B32922C3104M189 by TDK is a film capacitor with capacitance of 0.1uF, rated DC voltage of 630V, and rated AC voltage of 310V. It is used in applications requiring a fixed capacitor with polypropylene dielectric material, such as power supplies and filtering circuits due to its high operating temperature range (-40 to 110 °C) and through-hole mounting feature.
B32922C3104M000
The TDK B32922C3104M000 is a film capacitor with a capacitance of 0.1 uF and rated DC voltage of 630 V. It is commonly used in applications requiring fixed capacitors, such as power electronics and industrial equipment.
B32924C3225M000
B32924C3225M000 by TDK is a fixed capacitor with a capacitance of 2.2 uF and rated DC voltage of 630 V. It is made of polypropylene dielectric material and has a rectangular package shape. This capacitor is commonly used in applications requiring high voltage tolerance and temperature resistance, such as power supplies and industrial equipment.
B32924C3475M000
B32924C3475M000 by TDK is a 4.7uF film capacitor with a rated DC voltage of 630V and rated AC voltage of 310V. It has a rectangular package shape, through-hole mount feature, and is made of polypropylene dielectric material. Ideal for applications requiring high capacitance stability and reliability in electrical circuits.
B32922C3104K289
B32922C3104K289 by TDK is a film capacitor with a capacitance of 0.1 uF and rated DC voltage of 630 V. It is used in applications requiring fixed capacitors, such as power electronics and industrial equipment. Its compact rectangular package shape and through-hole mounting feature make it easy to integrate into circuit boards.
B32922C3224M000
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
B32921C3104M289
B32921C3104M289 by TDK is a film capacitor with 0.1 uF capacitance, rated for 310V AC and 630V DC. It has a rectangular package shape, through-hole mount feature, and operates b/w -40 to 110 °C. Ideal for applications requiring high voltage tolerance and reliability like power supplies and industrial equipment.
B32921C3104M000
The TDK B32921C3104M000 is a film capacitor with capacitance of 0.1uF, rated DC voltage of 630V, and rated AC voltage of 310V. It is used in applications requiring a fixed capacitor with polypropylene dielectric material, such as power supplies and filtering circuits due to its compact rectangular package design and through-hole mounting feature.
B32922C3474M289
The TDK B32922C3474M289 is a POLYPROPYLENE film capacitor with 0.47 uF capacitance, rated for 630V DC and 310V AC. It has a rectangular package shape, through-hole mount feature, and is ideal for applications requiring high voltage tolerance and reliability in industrial electronics.
B32922C3224M289
B32922C3224M289 by TDK is a POLYPROPYLENE film capacitor with capacitance of 0.22 uF, rated DC voltage of 630 V, and rated AC voltage of 310 V. It has a rectangular package shape, through hole mount feature, and is suitable for applications requiring high temperature stability such as in power supplies and industrial equipment.
B32922C3474M000
The TDK B32922C3474M000 is a film capacitor with 0.47 uF capacitance and 630V rated DC voltage. It features a polypropylene dielectric material, 310V rated AC voltage, and -40 to 110 °C operating temperature range. Ideal for applications requiring high reliability and performance in bulk packaging for through hole mounting.
B32922C3104K189
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
B32923C3105M000
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
B32922C3684M189
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .68 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
B32922C3334M189
B32922C3334M189 by TDK is a film capacitor with capacitance of 0.33uF, rated DC voltage of 630V, and rated AC voltage of 310V. It is used in applications requiring a fixed capacitor with polypropylene dielectric material, such as power supplies and filtering circuits due to its high operating temperature range (-40 to 110 °C) and compact rectangular package design for through-hole mounting.
B32922C3104K000
B32923C3105M189
B32923C3474M189
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved