Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER TRANSFORMER; Approvals (V): UL; CSA; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 12 VA; Output Current-1: .25 A; No. of Winding (Secondary): 2;
Median Price
$15.090
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$11.730
100+ parts
$7.600
1k+ parts
$7.520
10k+ parts
-
Master Electronics
$7.240
Verical
$19.617
Modulus Dynamics
$6.983
Perfect Parts
Power & Mains Transformers 3FD-548 attributes and parameters. Explore more Power & Mains Transformers devices from Tamura
Additional Features:
Approvals (V):
No. of Winding (Secondary):
Nominal Operating Frequency:
Output Current-1:
Transformer Type:
Volt-Ampere Rating (VA):
3FD-548 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358M
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
10-12
Bel Fuse
Bel Fuse 10-12 is a power transformer with dimensions of L95.3XB82.6XH79.4 (mm). It has a center tap feature on both secondaries and an isolation voltage of 1500 V. With an output current of 12 A and output voltage of 5 V, it is suitable for chassis mount applications requiring reliable power supply.
F10-110
Triad Magnetics
Triad Magnetics F10-110 is a 1.1VA split bobbin power transformer with 2 windings, providing 5V output voltage at 0.22A current. It features center tap on both secondary windings and isolation voltage of 2500V, making it ideal for power applications requiring CSA and UL approvals. Dimensions are L34.92xB28.57xH23.8mm for through-hole mounting in single-phase systems with a nominal input voltage of 115V at 50/60Hz frequency.
1290
Amecon
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 750 VA; No. of Winding (Secondary): 1; Output Current-1: 25 A;
44058
Myrra Sas
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): EN; UL; Height: 22.2 mm; Output Voltage-2: 15 V; Width: 27.6 mm;
BVEI3042040
Hahn And Kg
BVEI3042040 by Hahn And Kg is a 2.6 VA power transformer with UL, CSA, VDE approvals. It has an output voltage of 6V and current of 0.434A, suitable for single 230V primary rating applications. This split bobbin transformer is compactly designed for through-hole mounting in various electronic devices.
VTX-146-120-112
Multicomp Pro
VTX-146-120-112 by Multicomp Pro is a toroidal power transformer with 120 VA rating, outputting 12V at 5A. It has two secondary windings and is designed for chassis mounting in applications requiring a single primary input of 230V. Dimensions are D98.0xH44.0 mm, making it suitable for compact setups.
Signal Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; No. of Winding (Secondary): 2; Center Tap Feature-2: YES; Height: 79.4 mm;
2190
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2190; No. of Winding (Secondary): 1; Output Current-1: 4 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 120 VA;
1188
TOROIDAL POWER TRANSFORMER; Output Current-1: 8.33 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 150 VA;
PH50MGJ
Hammond Power Solutions
PH50MGJ by Hammond Power Solutions is a 50 VA power transformer with dual output currents of 0.42 A and 0.21 A, suitable for CE and CUL approved applications. With output voltages of 120 V and 240 V, it operates at a frequency of 60 HZ and can be chassis mounted for various power supply needs.
1216
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 200 VA; Output Current-1: .89 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
2041
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2041; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 12 VA; Output Current-1: 1.33 A; Nominal Operating Frequency: 60 HZ;
STM1696612
Analog Devices
Analog Devices' STM1696612 is a 5 VA power transformer with 500V isolation voltage. It operates b/w -55°C to 105°C, outputting 90V at 400Hz. Ideal for applications requiring reliable power conversion in compact spaces.
2084
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2084; Output Current-1: 1.39 A; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 25 VA; Nominal Operating Frequency: 60 HZ;
1287
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 750 VA; Output Current-1: 6.52 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
FL30/18
Block Transformatoren-elektronik
FL30/18 by Block Transformatoren-elektronik is a 30 VA power transformer with dual 115V primary rating. It has two secondary windings, each providing 18 V output voltage. Approved by CSA, CUL, EAC, UL, and VDE, it operates at a max temperature of 40°C. Ideal for applications requiring reliable power conversion in compact spaces.
44093
Myrra Sas 44093 Power Transformer has dual 63A output currents, two secondary windings, and dimensions of L32.6xB27.6xH24.3 mm. Ideal for applications requiring a single 230V primary rating, THROUGH HOLE MOUNTED mounting feature, and 12V output voltages.
1186
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 150 VA; No. of Winding (Secondary): 1; Output Current-1: 5.36 A; Nominal Operating Frequency: 60 HZ;
FL14/8
FL14/8 by Block Transformatoren-elektronik is a 14 VA power transformer with dual 115V primary rating. It has two secondary windings at 8 V each, suitable for applications requiring a max operating temperature of 40°C. Approved by CSA, CUL, EAC, UL, and VDE, it is ideal for through-hole mounting in various power and mains transformer setups.
1208
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 200 VA; Output Current-1: 11.11 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Tamura
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved