Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's UMK107B7104KA-T is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
Median Price
$0.054
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.034
1k+ parts
$0.019
10k+ parts
$0.012
DigiKey
$0.110
$0.036
$0.024
-
Master Electronics
$0.026
Verical
$0.033
Future Electronics
$0.075
TTI
$0.016
Nova Conductors
$0.021
TME
$0.090
$0.015
$0.013
IBS Electronics
$0.096
Vyrian
Electro Sonic
NAC Semi
$0.152
Atlantic Semiconductor
Sensible Micro Corp
Prism Electronics
Dan-Mar Components
Cyclops Electronics Ltd
Inventory MP
Bristol Electronics
Resion
Electronics Depot
Semi Source
Ampacity Inc.
$0.009
Semicontronic
Continental Prestige Electronics
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$0.190
Corohmni
$0.398
Perfect Parts
Ceramic dielectric materials provide high stability and reliability, making this capacitor suitable for various applications.
Rectangular package shape allows for easy and compact mounting in circuit boards, saving space.
Multi-layer construction enhances capacitance density, making this capacitor efficient in storing charge.
This packing method ensures safe transportation and storage of the capacitors.
Having two terminals simplifies the connection process during circuit assembly.
Surface mount technology (SMT) package style enables easy and secure mounting on PCBs.
Wraparound terminal shape provides a robust connection and mechanical strength.
With a negative tolerance of 10%, this capacitor ensures consistent performance within specified limits.
X7R temperature characteristics indicate stable capacitance over a wide temperature range, suitable for diverse operating conditions.
Capable of operating at a high temperature of 125°C, ensuring reliability in demanding environments.
Being a ceramic capacitor, this product offers high capacitance values and excellent performance stability.
Can withstand low temperatures down to -55°C, making it suitable for applications in extreme cold environments.
The temperature coefficient of 15% indicates that the capacitance variation with temperature is within acceptable limits.
Matte tin finish with nickel barrier ensures good solderability and corrosion resistance for reliable connections.
Surface mounting feature allows for easy integration into modern PCB designs.
Low height profile of 0.8mm enables installation in compact electronic devices.
Narrow width of 0.8mm saves space on the PCB, ideal for densely populated circuits.
Compact length of 1.6mm further contributes to space-saving and efficient circuit layout.
With a positive tolerance of 10%, this capacitor maintains consistency in capacitance values for accurate performance.
The capacitance value of 0.1uF provides adequate charge storage capacity for various electronic applications.
With a rated DC voltage of 50V, this capacitor is suitable for low to moderate voltage applications, ensuring safe operation.
Fixed Capacitors UMK107B7104KA-T attributes and parameters. Explore more Fixed Capacitors devices from Taiyo Yuden
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
UMK107B7104KA-T Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Part Number - X5R, X7R Dielectrics 23/Jan/2008
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
GRM188R71H473KA61D
Murata Manufacturing
The Murata Manufacturing GRM188R71H473KA61D is a ceramic capacitor with 0.047uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C and has a 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
TAJA106K016RNJ
KYOCERA AVX
TAJA106K016RNJ by KYOCERA AVX is a 10uF tantalum capacitor with a rated DC voltage of 16V. It has a low tan delta of 0.06 and leakage current of 0.0016mA, making it suitable for applications requiring high reliability and stability in a compact size.
GRM155R61A105KE15D
Murata Manufacturing's GRM155R61A105KE15D is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
T491B106K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJB106K016RNJ
TAJB106K016RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0016mA, and ESR of 2800mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capabilities up to 70mA.
0402YC103KAT2A
0402YC103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 16V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size, high operating temperature of 125°C, and low min operating temperature of -55°C.
CL05A475MO5NUNC
Samsung Electro-mechanics
CL05A475MO5NUNC by Samsung Electro-mechanics is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability.
GRM2195C1H103JA01D
GRM2195C1H103JA01D by Murata Manufacturing is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With surface mounting feature and compact dimensions (2mm x 1.25mm x 0.85mm), it is ideal for use in electronic devices where space is limited.
CL31A106KBHNNNE
Samsung Electro-mechanics CL31A106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring stable performance in a compact rectangular package.
M39006/22-0350
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/22-0377
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CKG57NX7S2A226M500JH
TDK
CKG57NX7S2A226M500JH by TDK is a ceramic capacitor with 22uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring high reliability in a compact SMT package. Its J bend terminal shape and matte tin finish offer ease of installation and durability.
GRM188R60J106KE47D
Murata Manufacturing's GRM188R60J106KE47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
GRM21BR61E106KA73L
Murata Manufacturing's GRM21BR61E106KA73L is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/25-0220
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Additional Features: RIPPLE CURRENT IS MEASURED AT 85CEL;
GRT21BR61E226ME13L
GRT21BR61E226ME13L by Murata Manufacturing is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
T491C106K025AT
KEMET T491C106K025AT is a 10uF, 25V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 108mA. Ideal for surface mount applications in electronics requiring stable capacitance at temperatures ranging from -55 to 125°C.
T491B476K010AT
KEMET Corporation's T491B476K010AT is a 47uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0047mA, and Ripple Current of 117mA. Ideal for applications requiring compact SMT capacitors with high capacitance and low ESR like power supplies and consumer electronics.
1206GC102KAT1A
1206GC102KAT1A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 2000 V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high voltage handling capabilities.
M39006/30-0038
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UMK107AB7105KA-T
Taiyo Yuden
Taiyo Yuden's UMK107AB7105KA-T is a ceramic capacitor with 1uF capacitance and 50V URdc. With X7R temperature characteristics, it has a -55 to 125 °C operating range. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
UMK107BJ105KA-T
UMK107BJ105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, 10% negative tolerance, and 15% temp coef. Ideal for SMT applications, this rectangular package measures 1.6mm x 0.8mm x 0.8mm and operates b/w -55°C to 85°C.
UMK107B7474KA-TR
UMK107B7474KA-TR by Taiyo Yuden is a ceramic capacitor with 0.47uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high reliability and stability in various electronic devices.
UMK105B7104KV-FR
UMK105B7104KV-FR by Taiyo Yuden is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
UMK105BJ224KV-F
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
UMK105ABJ474KV-F
UMK105ABJ474KV-F by Taiyo Yuden is a ceramic capacitor with capacitance of 0.47uF and rated DC voltage of 50V. It has a temperature coefficient of 15% ppm/°C and operates b/w -55 to 85 °C, making it suitable for various SMT applications requiring stable performance in a compact form factor. With its multi-layer design and wraparound terminals, this capacitor offers high reliability and efficiency in electronic circuits.
UMK105B7104KVHF
UMK105B7104KVHF by Taiyo Yuden is a ceramic capacitor with 0.1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is ideal for surface mount applications in electronics requiring high reliability and performance under harsh conditions. This compact 0402 package offers a negative tolerance of 10% and operates b/w -55°C to 125°C efficiently.
UMK105CBJ105MV-F
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
UMK105B7221KV-F
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
UMK105CG121JV-F
UMK105CG121JV-F by Taiyo Yuden is a ceramic capacitor with 0.00012uF capacitance and 50V URdc. It features C0G temperature characteristics, 5% tolerance, and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
UMK107ABJ105KAHT
UMK105CBJ105KV-F
UMK107B7104KAHT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
UMK105CG102JVHF
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
UMK107BBJ225KA-T
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
UMK105B7103KV-F
UMK105B7103KV-F by Taiyo Yuden is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It features a temperature coefficient of 15% ppm/°C, X7R temperature characteristics code, and tan delta of 0.035. Ideal for SMT applications requiring compact size and high reliability in a wide temperature range from -55 to 125 °C.
UMK105CG220JV-F
UMK105CG220JV-F by Taiyo Yuden is a ceramic capacitor with capacitance of 0.000022 uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance across temperatures. With its compact size (1x.5x.5mm) and surface mount package style, it is ideal for space-constrained electronic devices.
UMK107AB7105MA-T
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
UMK105BJ104KV-F
UMK105BJ104KV-F by Taiyo Yuden is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability. Its multi-layer design and wraparound terminals ensure stable performance in various electronic devices.
UMK107B7102MZ-T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved