Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's NRS5030T1R0NMGJ is a fixed inductor with 1uH nominal inductance, 4A max current, and 110MHz self-resonance freq. Ideal for power applications, it operates b/w -25°C to 125°C. This SMT component features dual-ended terminals and ferrite core in a compact 4.9x4.9mm package.
Median Price
$0.123
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Newark
1+ parts
$0.087
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$0.230
$0.157
$0.124
$0.099
DigiKey
$0.290
$0.176
$0.137
$0.114
Element14
$0.316
$0.166
$0.132
Avnet
$0.100
$0.092
TTI
$0.098
Farnell
$0.113
Chip1Stop
Vyrian
Nova Conductors
Ampacity Inc.
$0.031
Semicontronic
$0.074
$0.072
Corohmni
Advanced Electronics
$0.121
Aztec Data Supply Inc.
$0.210
Continental Prestige Electronics
$0.296
Infinite Electronics LLP (Excess)
Argo Parts USA
Bastille Electronics
Easy to mount on printed circuit boards, saving space and facilitating automated assembly processes.
Suitable for high-frequency applications, providing reliable performance.
Ideal for power inductor applications where a specific inductance value is required.
Capable of handling high currents, making it suitable for power applications.
Ferrite core provides high magnetic efficiency and low core losses, ensuring optimal performance.
Fixed Inductors NRS5030T1R0NMGJ attributes and parameters. Explore more Fixed Inductors devices from Taiyo Yuden
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
NRS5030T1R0NMGJ Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bourns
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
CTX100-2-52M-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
LQG15HS10NJ02D
Murata Manufacturing
LQG15HS10NJ02D by Murata is a 0402-sized multilayer chip inductor with 0.01 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, rated current of 0.5 A, and self-resonance frequency of 3400 MHz. Ideal for general purpose use due to its high quality factor and dual-ended terminal placement.
B82731M2501A030
TDK
The TDK B82731M2501A030 is a radial fixed inductor with 47000 uH nominal inductance, 2 ohm DC resistance, and 50% tolerance. It is a general purpose power inductor for PCB mount applications, featuring a rectangular package with flat terminals and ferrite core material. Operating temperature ranges from -40 to 125 °C, suitable for various electronic devices requiring up to 0.5 A rated current.
HC3
Lcr Capacitors (Eu)
HC3 by Lcr Capacitors (Eu) is a fixed inductor with 1000uH nominal inductance, 25A max rated current, and 60°C max operating temp. Ideal for high current applications, it features radial terminal placement and flexible lead shape in a rectangular package.
NRS4018T220MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4018T220MDGJ is a chip inductor with 22uH nominal inductance, 0.348 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for power applications, this SMT component has a max operating temperature of 125°C and is a general-purpose inductor suitable for various electronic devices.
MLF1608E100KTD00
TDK's MLF1608E100KTD00 is a shielded, surface mount inductor with 10uH nominal inductance and 30MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor has a max operating temperature of 125°C and DC resistance of 1.7 ohm.
70-3
Coilcraft
Coilcraft's 70-3 fixed inductor with 0.15 uH nominal inductance, 1.18 A max current, and 38 min quality factor is ideal for filter choke applications. Featuring axial lead placement and encapsulated construction, it operates b/w -40 to 125 °C with a DC resistance of 0.1 ohm.
KLZ2012PHR220WTD25
KLZ2012PHR220WTD25 by TDK is an 0805 fixed inductor with 22uH nominal inductance, suitable for decoupling circuits. It features dual-ended terminals, ferrite core material, and operates b/w -55 to 150°C. With a max rated current of 0.22A and DC resistance of 1.25 ohm, it is ideal for general purpose applications requiring high reliability.
SRP1265A-220M
Bourns SRP1265A-220M is a shielded, surface mount fixed inductor with 22uH nominal inductance. It has a max rated current of 9A and operates at temperatures ranging from -55 to 150°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 6MHz and DC resistance of 37 ohm.
IHLP5050CEER2R2M01
Vishay Intertechnology's IHLP5050CEER2R2M01 is a shielded, surface mount inductor with 2.2uH nominal inductance and 16A max rated current. Ideal for high current applications, this rectangular package has dual-ended terminals and operates b/w -55°C to 125°C.
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
NRS4018T4R7MDGJ8
NRS4018T4R7MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.7A max rated current. Ideal for power applications, it operates b/w -40 to 125 °C with DC resistance of 0.07 ohm at 20% tolerance.
SRN3015-220M
Bourns SRN3015-220M is a shielded, surface mount fixed inductor with 22uH nominal inductance. Ideal for power applications, it has a max rated current of 0.6A and operates b/w -40°C to 125°C. Its compact size (3x3x1.5mm) and dual-ended terminal placement make it suitable for various general purpose inductor needs.
ARA00499
The TDK ARA00499 is a dual in-line fixed inductor with 6325 uH nominal inductance and 31.62% tolerance. Ideal for general purpose applications, it features rectangular construction, PCB mount package style, and wire terminal shape.
LLQ2012-F33NG
Toko
LLQ2012-F33NG by Toko is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a max rated current of 0.5 A.
DRA74-470-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
U05-3
Torotel Products
The Torotel Products U05-3 is a shielded RF inductor with 20000 uH nominal inductance, 1.23 ohm DC resistance, and operates b/w -55 to 85 °C. It features radial terminal placement, molybdenum permalloy core material, and circular package shape. Ideal for general purpose applications requiring precise inductance values at 0.001 MHz test frequency.
B82462A4473K000
The TDK B82462A4473K000 is a fixed inductor with 47uH nominal inductance, 0.64 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component operates b/w -55°C to 150°C with a max rated current of 0.54A.
768772222
Wuerth Elektronik & Kg
Wurth Elektronik 768772222 is a radial fixed inductor with 2200 uH nominal inductance, suitable for RF applications. Featuring 0.7 mm lead diameter and 5 mm lead spacing, it has a max operating temperature of 125 °C and self-resonance frequency of 1.2 MHz. Ideal for general purpose use due to its cylindrical package design and ferrite core material.
DS1302
Falco Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NRS5024T4R7MMGJ
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
NRS5030T4R7MMGJV
NRS5040T4R7NMGKV
NRS5030T2R2NMGJV
NRS5024T2R2NMGJ
NRS5030T3R3MMGJ
NRS5020T4R7MMGJV
NRS5040T220MMGKV
NRS5040T220MMGK
NRS5030T470MMGJ
NRS5040T150MMGJV
NRS5020T4R7MMGJ
NRS5024T100MMGJ
NRS5024T2R2NMGJV
NRS5024T6R8MMGJV
Taiyo Yuden's NRS5024T6R8MMGJV is a fixed inductor with 6.8uH nominal inductance, 1.6A max rated current, and 125°C max operating temp. Ideal for power applications, this SMT inductor features dual-ended terminals and ferrite core material.
NRS5030T3R3MMGJ8
NRS5030T3R3MMGJ8 by Taiyo Yuden is a surface mount, shielded fixed inductor with a nominal inductance of 3.3 uH and max rated current of 3 A. It is a general purpose inductor commonly used for power applications.
NRS5030T3R3MMGJV
NRS5030T100MMGJV
NRS5030T330MMGJ
NRS5030T1R0NMGJ8
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved