Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's MSAST063SCG102JFNA01 is a ceramic capacitor with 0.001uF capacitance and 25V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C, with ±5% tolerance. Ideal for SMT applications due to its compact 0.6x.3x.3mm size and wraparound terminals, suitable for various electronic devices requiring stable capacitance in a small form factor.
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.024
1k+ parts
$0.015
10k+ parts
$0.012
Mouser Electronics
$0.010
Arrow
-
Verical
IBS Electronics
Nova Conductors
Ampacity Inc.
$0.085
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Ceramic is a common dielectric material known for its stability, reliability, and high insulation resistance, making it a suitable choice for various applications.
Rectangular package shape allows for efficient board space utilization, making the component easy to handle and mount on a circuit board.
Multi-layer construction provides higher capacitance values in a compact size, enabling higher energy storage capabilities.
C0G temperature characteristics indicate a high stability over a wide temperature range, ensuring consistent performance in demanding environments.
With a rated DC voltage of 25V, this ceramic capacitor can be used in a variety of low to medium voltage applications with reliability and performance.
Fixed Capacitors MSAST063SCG102JFNA01 attributes and parameters. Explore more Fixed Capacitors devices from Taiyo Yuden
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Shape:
Width:
MSAST063SCG102JFNA01 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Lite-on Semiconductor
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
CGA6P3X7R1H475K250AB
TDK
TDK's CGA6P3X7R1H475K250AB is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. With SMT package style and compact dimensions of 2.5mm x 2.5mm x 3.2mm, it offers reliable performance in surface mount configurations.
EEEHB1H4R7R
Panasonic EEEHB1H4R7R is a 4.7uF aluminum electrolytic capacitor with 50V URdc, suitable for surface mount applications. It offers low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for high ripple current (23mA) environments in automotive electronics adhering to AEC-Q200 standards.
M39006/25-0052
Vishay Intertechnology
Vishay Intertechnology's M39006/25-0052 is a TANTALUM (WET) capacitor with a capacitance of 120 uF and rated DC voltage of 50 V. It has a low tan delta of 0.225 and leakage current of 0.004 mA, making it suitable for applications requiring high reliability and stability in harsh environments.
EEEFT1V561AP
Panasonic EEEFT1V561AP is a 560uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.196mA, and ripple current of 833mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
C3225X7S1H106M250AB
TDK C3225X7S1H106M250AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7S temp code. Ideal for surface mount applications in electronics due to its compact size and high temp range (-55 to 125 °C). Features include multi-layer design, matte tin finish, and negative/positive tolerance of 20%.
C1206C105K3RACTU
KEMET Corporation
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
GCJ188R71H104KA12D
Murata Manufacturing
Murata Manufacturing's GCJ188R71H104KA12D is a ceramic capacitor with 0.1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 compliance and compact SMT package measuring 1.6mm x 0.8mm x 0.8mm.
M39006/250143
Cornell Dubilier Electronics
M39006/250143 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 330uF capacitance, 50V URdc, and 741mA ripple current. Ideal for MIL-C-39006/25 applications requiring -55 to 125 °C operating temperature range and polarized mounting via THROUGH HOLE MOUNT.
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
M39006/25-0220
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
EEEFK1E470P
Panasonic EEEFK1E470P is a 47uF aluminum electrolytic capacitor with 25V rated DC voltage. It has tan delta of 0.14 and leakage current of 0.01175mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current capability of 180mA.
CL05C330JB5NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05C330JB5NNNC is a ceramic capacitor with 0.000033 uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring high precision and stability. The compact rectangular package with wraparound terminals ensures efficient PCB integration.
CGA4J3X7R1H225K125AB
CGA4J3X7R1H225K125AB by TDK is a ceramic capacitor with a capacitance of 2.2 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for its compact size and high performance.
0402YC103KAT2A
KYOCERA AVX
0402YC103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 16V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size, high operating temperature of 125°C, and low min operating temperature of -55°C.
0402B103K250CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CL05A475MQ5NRNC
Samsung Electro-mechanics' CL05A475MQ5NRNC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
GRM32ER61A107ME20L
Murata Manufacturing's GRM32ER61A107ME20L is a ceramic capacitor with 100uF capacitance, 10V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package and wraparound terminals.
M39006/22-0345
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
CC0805KKX7R7BB105
Yageo
Yageo's CC0805KKX7R7BB105 is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MSASE21GBB7106MTNA01
Taiyo Yuden
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASG105CC6105MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: CERAMIC;
MSASE105SB5105KFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASJ063AB5105MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSAST105SB5473KFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASJ32MAC7107MPNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASL21GAB7106KTNA01
MSASL21GAB7106KTNA01 by Taiyo Yuden is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 10 V. It has a rectangular package shape, measures 2mm in length, and is suitable for surface mount applications.
MSASU31LAB7475MTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASG32MSB5226MPNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASH21GBC7105KTCA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASJ105BB5475MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASJ21GBB5107MTCA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE063SB5473KFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE105SB7224MFNB25
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASE168AB5475KTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE168BB7225KTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASE1L3YB5474MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE21GBB5226MTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE319HB5225KTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSAST063SCG391JFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00039 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved