Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's MSASE105SB5105KFNA01 is a ceramic capacitor with 1uF capacitance and 16V URdc. It features X5R temp characteristics, -55 to 85°C operating range, and SMT package style. Ideal for compact electronics requiring stable performance in varying temperatures.
Median Price
$0.012
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.025
1k+ parts
$0.017
10k+ parts
DigiKey
$0.026
TTI
-
Arrow
Chip1Stop
$0.011
Future Electronics
$0.008
Verical
$0.004
Avnet
Newark
$0.028
$0.018
Element14
$0.005
Nova Conductors
$0.016
TME
Vyrian
IBS Electronics
Ampacity Inc.
$0.009
Argo Parts USA
Continental Prestige Electronics
CoreStaff
$0.081
$0.010
Netroflash
$0.015
Ceramic dielectric material provides high insulation resistance and low dielectric losses, making it suitable for high frequency applications.
Rectangular package shape allows for efficient placement and soldering on circuit boards.
Multi-layer design increases capacitance density in a small footprint, ideal for compact electronic devices.
TR packing method ensures safe transportation and storage of the capacitors.
Two terminals provide simple and secure connections in the circuit.
SMT package style allows for surface mounting on PCBs, saving space and facilitating automated assembly processes.
Wraparound terminal shape ensures a strong mechanical connection and prevents detachment during operation.
10% negative tolerance ensures consistent performance within specified limits.
X5R temperature characteristic code indicates stable capacitance over a wide temperature range, suitable for varying environmental conditions.
High maximum operating temperature allows for reliable performance in demanding applications.
Ceramic capacitors offer high reliability, low cost, and excellent high-frequency characteristics.
Low minimum operating temperature ensures functionality in extreme cold environments.
15% temperature coefficient indicates minimal variation in capacitance with temperature changes.
Tin terminal finish with Nickel barrier provides good solderability and corrosion resistance for long-term reliability.
Low profile height allows for compact design and space-saving in electronic applications.
Narrow width enables high packing density on the PCB, maximizing component placement.
Surface mount capability simplifies assembly processes and reduces overall system size.
Short length accommodates tight PCB layouts and contributes to miniaturization of electronic devices.
10% positive tolerance ensures consistent performance within specified limits.
1uF capacitance value offers flexibility for various applications requiring energy storage or filtering.
High rated DC voltage allows for use in applications requiring higher voltage levels.
Fixed Capacitors MSASE105SB5105KFNA01 attributes and parameters. Explore more Fixed Capacitors devices from Taiyo Yuden
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
MSASE105SB5105KFNA01 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
4554
Jw Miller Magnetics
Other Semiconductors;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Zetex Plc
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
GRM155R60J106ME44D
Murata Manufacturing
Murata Manufacturing's GRM155R60J106ME44D is a ceramic capacitor with 10uF capacitance, 6.3V URdc, and X5R temp characteristics. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and wraparound terminals, suitable for various electronic devices requiring stable capacitance in a compact form factor.
M39006/25-0236
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/30-0040
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 850 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
M39006/25-0052
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
06035C104K4Z2A
06035C104K4Z2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 1.6mm x 0.81mm x 0.9mm.
C0603C222K5RACTU
KEMET Corporation
KEMET C0603C222K5RACTU is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM21BR60J226ME39L
Murata Manufacturing's GRM21BR60J226ME39L is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
CGA5L3X5R1H106K160AB
TDK
TDK's CGA5L3X5R1H106K160AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X5R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and compact 3.2x1.6x1.6mm size for surface mounting feature.
M39006/25-0143
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
T491D107K016AT
KEMET Corporation's T491D107K016AT is a TANTALUM CAPACITOR with 100uF capacitance, 16V URdc, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling up to 185mA, such as power supplies and voltage regulators in electronic devices.
M39006/22-0377
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
293D106X9016B2TE3
Vishay Intertechnology
Vishay Intertechnology's 293D106X9016B2TE3 is a TANTALUM CAPACITOR with 10uF capacitance, 16V URdc, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
M39006/22-0360
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
CGA2B2X7R1E103K050BA
TDK's CGA2B2X7R1E103K050BA is a ceramic capacitor with capacitance of 0.01uF, rated at 25V DC. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
08055C104K4T2A
08055C104K4T2A by KYOCERA AVX is an 0805 SMT ceramic capacitor with 0.1uF capacitance, 10% tolerance, X7R temperature characteristics. It operates b/w -55 to 125 °C and is ideal for automotive applications meeting AEC-Q200 standard.
ECEA1HN4R7U
Panasonic
Panasonic ECEA1HN4R7U is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for applications requiring high ripple current (30mA) and low leakage current (0.01005mA). Its cylindrical package design with through-hole mounting makes it ideal for various electronic circuits.
0805B104K500CT
Walsin Technology
0805B104K500CT by Walsin Technology is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance.
CL10B473KB8NNNC
Samsung Electro-mechanics
CL10B473KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.047uF capacitance and 50V rated DC voltage. It has a compact size of 1.6mm x 0.8mm x 0.9mm, making it suitable for surface mount applications in various electronic devices due to its X7R temperature characteristics and -55°C to 125°C operating temperature range. The capacitor's multi-layer design and wraparound terminals ensure reliable performance in diverse circuit configurations with a ±10% tolerance level.
JMK107ABJ106MAHT
Taiyo Yuden
Taiyo Yuden's JMK107ABJ106MAHT is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it has a compact SMT package ideal for automotive applications. With dimensions of 1.6mm x 0.8mm x 0.8mm, this multi-layer capacitor offers high reliability and performance in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MSASE21GBB7106MTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASG105CC6105MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: CERAMIC;
MSASJ063AB5105MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSAST105SB5473KFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASJ32MAC7107MPNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASL21GAB7106KTNA01
MSASL21GAB7106KTNA01 by Taiyo Yuden is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 10 V. It has a rectangular package shape, measures 2mm in length, and is suitable for surface mount applications.
MSAST063SCG102JFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASU31LAB7475MTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASG32MSB5226MPNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASH21GBC7105KTCA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASJ105BB5475MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASJ21GBB5107MTCA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE063SB5473KFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE105SB7224MFNB25
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASE168AB5475KTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE168BB7225KTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MSASE1L3YB5474MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE21GBB5226MTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE319HB5225KTNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MSASE105SB5105MFNA01
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved