Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's MCF08062G900-T is a Data Line Filter with 4 terminals, 100 Mohm min insulation resistance, and 6.5 ohm max DC resistance. It has an output impedance of 90 ohm and rated current of 0.1 A. Ideal for surface mount applications requiring effective data line filtering in compact spaces.
Median Price
$0.010
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Arrow
1+ parts
$0.001
100+ parts
1k+ parts
10k+ parts
Chip1Stop
-
$0.018
Nova Conductors
$0.029
Chip Stock
Vyrian
Ampacity Inc.
Semicontronic
Aranea Global
$0.028
$0.027
Continental Prestige Electronics
Argo Parts USA
Corohmni
$2.680
Aztec Data Supply Inc.
$3.210
AZTECH Wire
$12.972
Kepictronics
High insulation resistance ensures reliable operation and protection against electrical failures.
Having 4 terminals allows for versatile connectivity options and compatibility with various devices.
Specifically designed for data line filtering, ensuring clean and interference-free data transmission.
Compact width makes it suitable for installations where space is limited.
Low DC resistance helps in minimizing power loss and maintaining efficiency.
Optimal length for effective filtering without adding bulk to the device.
Output impedance of 90 Ohm ensures impedance matching and reliable signal transmission.
Tape packing simplifies handling, storage, and assembly processes.
Surface mount design facilitates easy and secure installation on circuit boards.
Compact dimensions ensure compatibility with various electronic devices and systems.
Suitable for low-current applications while providing efficient filtering capabilities.
Low profile height makes it ideal for applications where space is a constraint.
Data Line Filters MCF08062G900-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Width (mm):
MCF08062G900-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 25/Feb/2021
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Bharat Electronics
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Hy Electronic
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
HI1206T161R-10
Laird Technologies
HI1206T161R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. With dimensions of L3.2XB1.6XH1.1 (mm), it operates b/w -40 to 125 °C and has a max frequency of 1000 MHz. Ideal for applications requiring impedance of 160 OHM and rated current of 6 A in surface mount configurations.
BLM21BB471SN1D
Murata Manufacturing
Murata Manufacturing's BLM21BB471SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.4 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and is designed for surface mount installation in various electronic devices.
BK2125HM601-T
Taiyo Yuden
BK2125HM601-T by Taiyo Yuden is a chip bead data line filter with 500V rated voltage and 600 Ohm output impedance. With dimensions of L2.0XB1.25XH0.85 (mm), it operates b/w -55 to 125 °C, making it ideal for surface mount applications in electronic devices requiring noise suppression up to 100 MHz frequencies.
MMZ1005A222ET000
TDK
TDK MMZ1005A222ET000 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 2.2 ohm and an output impedance of 2200 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
74279271
Wuerth Elektronik & Kg
Wurth Elektronik 74279271 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 120 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in electronic devices up to 600 MHz frequency range.
NFE61PT102E1H9L
Murata Manufacturing's NFE61PT102E1H9L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2A rated current. It has one function and three terminals, suitable for applications requiring noise filtering in data lines. Operating temperature ranges from -40°C to 85°C, making it versatile for various electronic devices.
8108-RC
Bourns
The Bourns 8108-RC Data Line Filter features 2 functions, 4 terminals, and inductance of 1000 uH. With UL approval, it operates b/w -55°C to 105°C. Ideal for applications requiring a max DC resistance of 0.01 ohm and rated current of 10 A.
IP4252CZ16-8-TTL,1
NXP Semiconductors' IP4252CZ16-8-TTL,1 is a 16-terminal data line filter with a max operating temperature of 85°C and min of -40°C. It is surface mountable in plastic package material. Ideal for applications requiring noise filtering in data transmission systems.
P0422NLT
Pulse Electronics
Pulse Electronics P0422NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 770uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.04 ohm, and rated current of 4.7A. Ideal for surface mount applications in automotive electronics due to its compact size (L19.56xB17.02xH9.91 mm).
TPD6F003DQDR
TPD6F003DQDR by Texas Instruments is a data line filter with 6 functions and 12 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L2.6xB1.45xH0.8 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces like consumer electronics or industrial equipment.
MMZ1608Y152BTA00
The TDK MMZ1608Y152BTA00 is a chip bead data line filter with 2 terminals, rated for 0.3A current and 1500 ohm output impedance. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm (LxWxH). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
STF202-22T1G
Onsemi
STF202-22T1G by Onsemi is a Data Line Filter with 2 functions and 6 terminals. It operates b/w -55°C to 125°C, has a max DC resistance of 24 ohm, and capacitance of 68 uF. This surface mount filter is IEC approved and commonly used in applications requiring data line filtering.
MPZ1608S221ATD25
TDK's MPZ1608S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. Operating b/w -55°C to 125°C, it's ideal for data line filtering in surface mount applications due to its compact dimensions of L1.6xB0.8xH0.8 mm.
ILHB0603ER600V
Vishay Intertechnology's ILHB0603ER600V is a 2-terminal FERRITE CHIP filter with dimensions of 1.6x0.8x0.8mm, suitable for surface mount applications. It offers a max operating temperature of 125°C and a rated current of 2A, making it ideal for data line filtering in electronic devices requiring impedance of 60 ohms at frequencies ranging from 100 MHz to DC.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
P0354NLT
Pulse Electronics P0354NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 1170 uH. It operates b/w -40 to 120 °C and has a max DC resistance of 0.2 ohm. Ideal for surface mount applications, it offers a rated current of 1.22 A in compact dimensions of L12.7xB12.7xH5.46 mm, making it suitable for various electronic devices requiring noise filtering on data lines.
ECLAMP2456P.TCT
Semtech
Semtech's ECLAMP2456P.TCT is a 5V data line filter with 6 functions and 12 terminals. It offers 40 dB attenuation at 2700 MHz, operating from -40 to 85°C. Ideal for applications requiring surface mount filters with dimensions of L3.1xB1.7xH0.65 mm in plastic packaging on tape and reel.
BLM21PG300SN1D
BLM21PG300SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.014 ohm, it offers output impedance of 30Ω at 100MHz. Ideal for data line filtering applications due to its compact size and high rated current of 2.3A.
NFL21SP106X1C3D
The Murata Manufacturing NFL21SP106X1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 0.68 uH inductance. It is suitable for applications requiring noise suppression in data lines, offering a compact size of L2.0XB1.25XH0.85 (mm) and surface mounting type.
744273501
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCF08062G120-T
DATA LINE FILTER; Maximum DC Resistance: 2.5 ohm; Rated Current: .13 A; Mounting Type: SURFACE MOUNT; Width (mm): 0.65; Minimum Insulation Resistance: 100 Mohm;
MCF08062G330-T
DATA LINE FILTER; Maximum DC Resistance: 2.5 ohm; Rated Current: .1 A; Width (mm): 0.65; Length: .85 mm; Height: .4 mm;
MCF08062G470-T
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .1 A; Minimum Insulation Resistance: 100 Mohm; Dimensions: L0.85XB0.65XH0.4 (mm)/L0.033XB0.026XH0.016 (inch); No. of Terminals: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved