Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's LHL08TB102J is a 1000 uH fixed inductor with 0.6 mm lead diameter and 5 mm lead spacing. Ideal for RF applications, it has a max operating temperature of 105°C, self-resonance frequency of 1.5 MHz, and ferrite core material.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Lantek
SPM Sales
Prism Electronics
Manoshevitz Elec. Sales
Nova Conductors
AZTECH Wire
$0.740
$0.710
$0.700
$0.680
Ampacity Inc.
$3.050
Aranea Global
The small lead diameter allows for easy soldering and connection to circuit boards.
The spaced out leads make it easier for placement on circuit boards and reduce the risk of short circuits.
Radial terminal placement allows for easy installation and connection in various electronic circuits.
The high nominal inductance makes this inductor suitable for RF applications where a specific inductance value is required.
With a high maximum operating temperature, this inductor can withstand elevated temperatures without any loss in performance.
The low DC resistance ensures efficient power transfer and minimal energy loss in the circuit.
Ferrite core material provides high magnetic permeability and low electrical conductivity, making it ideal for high frequency applications.
Fixed Inductors LHL08TB102J attributes and parameters. Explore more Fixed Inductors devices from Taiyo Yuden
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Lead Diameter:
Lead Length:
Lead Spacing:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Diameter:
Packing Method:
LHL08TB102J Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - LH Series EOL 26/Jun/2019
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
PM1812-221J-RC
Bourns
Bourns PM1812-221J-RC is a 220uH fixed inductor with dual-ended terminals, suitable for power applications. It operates at -40 to 125°C, with max current of 0.1A and DC resistance of 10Ω. This general-purpose inductor has a self-resonance frequency of 4MHz and comes in an SMT package measuring 4.5x3.2x3.2mm (LxWxH).
NRS4018T4R7MDGJ8
Taiyo Yuden
NRS4018T4R7MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.7A max rated current. Ideal for power applications, it operates b/w -40 to 125 °C with DC resistance of 0.07 ohm at 20% tolerance.
SRP1038A-2R2M
Bourns SRP1038A-2R2M is a shielded, dual-ended SMT inductor with 2.2uH nominal inductance and 12A max rated current. Ideal for power applications, it has a compact size of 11x10x3.8mm, operates b/w -55 to 150°C, and meets AEC-Q200 standards.
MLZ1608N100LT
TDK
TDK's MLZ1608N100LT is a 10uH fixed inductor with dual-ended terminals, suitable for RF applications. It features a max operating temperature of 125°C, 0.3A rated current, and 20% tolerance. This shielded, surface-mount inductor has a compact 0603 size and ferrite core material.
LQM21DN150M70L
Murata Manufacturing
Murata Manufacturing's LQM21DN150M70L is an 0805 fixed inductor with 15uH nominal inductance, suitable for power applications. It has a max operating temperature of 125°C, rated current of 0.25A, and self-resonance frequency of 24MHz. This shielded SMT inductor features dual-ended terminals and ferrite core material.
36501E16NJTDG
TE Connectivity's 36501E16NJTDG is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.016 uH and max rated current of 0.56 A, making it ideal for RF applications. With a self-resonance frequency of 3100 MHz and compact size (1.27mm x 0.76mm x 0.61mm), it suits general purpose inductor needs.
NRS4018T4R7MDGJV
Taiyo Yuden's NRS4018T4R7MDGJV is a fixed inductor with 4.7uH nominal inductance, 1.7A max rated current, and 35MHz self-resonance frequency. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125 °C, and has dual-ended terminals for SMT installation.
DR127-220-R
Eaton Corporation
Eaton Corporation's DR127-220-R is a shielded, surface mount fixed inductor with 22uH nominal inductance and 4A max rated current. Ideal for power applications, this general purpose inductor has a dual-ended terminal placement and operates b/w -40°C to 125°C.
74437324220
Wuerth Elektronik & Kg
Wurth Elektronik 74437324220 is a shielded fixed inductor with 22uH nominal inductance, 0.5 ohm DC resistance, and 1A max rated current. Ideal for power applications, this SMT component features dual-ended terminals and operates b/w -40 to 125°C.
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
3615A101K
TE Connectivity's 3615A101K is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 100uH, max operating temperature of 100°C, and self-resonance frequency of 8MHz. Ideal for RF applications due to its rectangular package shape and general purpose design.
32957
Vishay Intertechnology
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; No. of Functions: 3; Nominal Inductance (L): 6.14 uH;
B82462G4224M000
The TDK B82462G4224M000 is a shielded, surface mount fixed inductor with 220uH nominal inductance. It has a max rated current of 0.35A and operates b/w -55 to 150°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
NRS4018T100MDGJ8
NRS4018T100MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 25MHz and operates b/w -40 to 125°C.
DR127-150-R
Cooper Electronic Technologies
B82432C1103K000
The TDK B82432C1103K000 is a surface mount fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 150°C and a self-resonance frequency of 28MHz. This general purpose inductor features dual-ended terminals and J bend shape, making it ideal for various electronic circuits.
HCF1007-3R3-R
HCF1007-3R3-R by Eaton Corp is a surface mount fixed inductor with 3.3uH nominal inductance, 0.0075 ohm DC resistance, and 10% tolerance. It is a general purpose power inductor suitable for applications requiring a max operating temperature of 125°C and min of -40°C. The rectangular package with ferrite core and wraparound terminals make it ideal for various electronic devices.
LQH44PN4R7MP0L
Murata Manufacturing's LQH44PN4R7MP0L is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.7A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 40MHz and operates b/w -40 to 125°C.
B82477G4333M000
B82477G4333M000 by TDK is a shielded, surface mount fixed inductor with 33uH nominal inductance and 3A max rated current. Ideal for power applications, it features dual-ended terminals, operates b/w -55°C to 125°C, and has a compact 5050 case size.
XAL6030-222MEC
Coilcraft
Coilcraft XAL6030-222MEC is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 10A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.01397 ohm and self-resonance frequency of 30MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LHL08NB6R8M
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO;
LHL08TB4R7M
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): RADIAL; Shielded: NO; Surface Mount: NO;
LHL08TB151K
LHL08TB180K
LHL08TB220K
LHL08TB221K
LHL08TB271K
LHL08TB390K
LHL08TB470K
LHL08TB470K by Taiyo Yuden is a fixed inductor with a nominal inductance of 47 uH and max rated current of 1.2 A. It is commonly used as an RF inductor due to its high quality factor (40) and self-resonance frequency (8.2 MHz).
LHL08TB680K
LHL08TB680K by Taiyo Yuden is a fixed inductor with a nominal inductance of 68 uH. It has a max rated current of 1 A and operates at temperatures up to 105 °C. This general purpose inductor is commonly used for RF applications.
LHL08TB100K
LHL08TB1R0N
LHL08TB1R5M
LHL08TB120K
LHL08TB101K
LHL08TB121K
LHL08TB122J
LHL08TB103J
LHL08TB123J
LHL08TB152J
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved