Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK MLZ2012M150WT000 is a shielded fixed inductor with 15uH nominal inductance, 0.95 ohm DC resistance, and 0.25A max rated current. Ideal for general purpose applications, this SMT component operates b/w -55 to 125 °C and features dual-ended terminals.
Median Price
$0.060
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
1k+ parts
$0.046
10k+ parts
$0.038
DigiKey
$0.049
-
Verical
$0.031
Arrow
$0.035
TTI
Farnell
$0.030
TTI Europe
Newark
$0.069
$0.063
Element14
$5.680
$3.900
$3.220
Nova Conductors
$0.078
IBS Electronics
$0.101
Chip Stock
Vyrian
NAC Semi
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Speed Components Ltd
NexGen Digital
Ampacity Inc.
$0.025
Semicontronic
$0.024
Argo Parts USA
$0.066
$0.064
Continental Prestige Electronics
$0.047
$0.037
Modulus Dynamics
$0.075
Corohmni
Advanced Electronics
$0.077
$0.073
Aztec Data Supply Inc.
$0.520
Glotronic Ltd.
Robosynatics
Lucentia Tech
$0.074
$0.072
Authorized Procurement Solutions
Formix International (Excess)
Ease of installation on PCBs and compatibility with automated assembly processes.
Helps to prevent electromagnetic interference (EMI) and noise in the circuit.
Allows for flexibility in circuit design and connection options.
Suitable for applications requiring high frequency operation.
Provides the desired inductance value for the intended circuit application.
Ensures safe operation even at high temperatures.
Can handle relatively high current levels without impacting performance.
Low resistance helps minimize power losses in the circuit.
Ferrite core provides good magnetic properties and helps in reducing interference.
Allows for a certain degree of variation while maintaining overall performance.
Fixed Inductors MLZ2012M150WT000 attributes and parameters. Explore more Fixed Inductors devices from TDK
Inductor Type:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
MLZ2012M150WT000 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Multilayer Inductor Part Number Change 2014
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
EU2B-YS3203F
Idec
ROTARY SWITCH;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Sangdest Microelectronics (Nanjing)
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
DR127-150-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
PE-53116NL
Pulse Electronics
PE-53116NL by Pulse Electronics is a dual-ended fixed inductor with 167uH nominal inductance, 0.07 ohm DC resistance, and 20% tolerance. It is a general-purpose inductor suitable for applications requiring a rectangular package shape and operating temperatures ranging from -40 to 130°C at a test frequency of 0.02 MHz.
XFL4020-152MEB
Coilcraft
Coilcraft XFL4020-152MEB is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 9.1A max rated current. Ideal for power applications, it has a self-resonance frequency of 59MHz and operates b/w -40°C to 125°C.
74438356047HT
Wuerth Elektronik & Kg
Wurth Elektronik's 74438356047HT is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, featuring a self-resonance frequency of 18MHz and DC resistance of 0.0748 ohm.
XFL4020-222MEC
Coilcraft XFL4020-222MEC is a shielded, dual-ended SMT inductor with 2.2uH nominal inductance and 8A max current rating. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.0235 ohm and self-resonance frequency of 38MHz.
B82793-S513-N201
TDK
The TDK B82793-S513-N201 is a surface mount fixed inductor with 51uH nominal inductance and 0.8A max rated current. It is a general-purpose filter choke suitable for various applications, featuring dual in-line terminal placement and a compact rectangular package measuring 7.1mm x 6mm x 4.9mm.
LL1608-FH68NJ
Toko
LL1608-FH68NJ by Toko is a 0603 fixed inductor with 0.068 uH nominal inductance, suitable for RF applications. It has dual-ended terminals, WRAPAROUND shape, and operates at -40 to 100 °C. With a self-resonance frequency of 1050 MHz and ceramic core material, it's ideal for general purpose use.
MLZ2012N220LT000
MLZ2012N220LT000 by TDK is an 0805 SMT fixed inductor with 22uH nominal inductance, 0.67 ohm DC resistance, and 0.3A max rated current. Ideal for general purpose applications requiring a compact, shielded dual-ended inductor with a ferrite core and operating temperature range of -55 to 125°C.
DR125-4R7-R
Eaton Corporation
Eaton Corporation's DR125-4R7-R is a shielded, dual-ended power inductor with 4.7uH nominal inductance and 7.18A max rated current. Ideal for general purpose applications, this SMT inductor features a matte tin over nickel terminal finish and operates b/w -40 to 125 °C temperatures.
ETQP5M4R7YFC
Panasonic
Panasonic ETQP5M4R7YFC is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 13.1A max rated current. Ideal for power applications, it features wraparound terminals, metal composite core material, and operates b/w -40 to 150°C.
74477020
The Wurth Elektronik 74477020 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 100 uH and can handle a max rated current of 2.2 A. This general purpose inductor is commonly used for power applications.
LQH5BPHR47NT0L
Murata Manufacturing
LQH5BPHR47NT0L by Murata Manufacturing is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.47 uH and can handle a max rated current of 4 A. This general purpose inductor is commonly used for power applications.
5106
Frontier Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 4; Shielded: NO; Surface Mount: NO; Terminal Placement: ON CIRCLE;
7440710082
Wurth Elektronik 7440710082 is a shielded SMT inductor with 0.82uH nominal inductance, 7.3A max current, and 125°C max operating temp. Ideal for power applications due to its rectangular package design and general purpose inductor type.
36501J12NJTDG
TE Connectivity
TE Connectivity's 36501J12NJTDG is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. With a nominal inductance of 0.012 uH and max rated current of 0.7 A, it operates at temperatures ranging from -40 to 125 °C. This general purpose inductor has a self-resonance frequency of 4000 MHz and DC resistance of 0.13 ohm.
74477110
Wurth Elektronik 74477110 is a shielded fixed inductor with dual-ended terminals. It has a nominal inductance of 10uH, max rated current of 5A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and WRAPAROUND terminal shape.
SLF12555T-330M1R9-PF
SLF12555T-330M1R9-PF by TDK is a shielded, surface mount inductor with 33uH nominal inductance and 3.1A max rated current. Ideal for power applications, it features a dual-ended terminal placement and operates b/w -40°C to 105°C temperature range.
SRR1210-470M
Bourns
Bourns SRR1210-470M is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 3.8A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 4.5MHz and DC resistance of 0.072 ohm.
B82464A4105K000
The TDK B82464A4105K000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max operating temperature of 150°C and can handle a rated current of 0.33A. This general purpose inductor features dual-ended terminals and L bend shape, making it ideal for various electronic circuits.
XAL4030-472MEB
Coilcraft XAL4030-472MEB is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 36MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MLZ2012N100LT000
MLZ2012N100LT000 by TDK is a 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 20% tolerance. It is a general purpose inductor suitable for various applications requiring a max rated current of 0.5A and operating temperatures ranging from -55 to 125 °C.
MLZ2012N6R8LT000
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Special Feature: DC RESISTANCE IS MEASURED AT : 30%, INDUCTANCE IS MEASURED AT 0.1 MILLI AMPERE;
MLZ2012M100WT000
The TDK MLZ2012M100WT000 is a shielded, surface mount fixed inductor with 10uH nominal inductance and 0.47 ohm DC resistance. It operates b/w -55 to 125 °C, with a max rated current of 0.35A. Ideal for general purpose applications requiring compact rectangular package design.
MLZ2012N100LTD25
MLZ2012N100LTD25 by TDK is an 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 0.5A max rated current. Ideal for general purpose applications, this shielded SMT inductor operates b/w -55 to 125 °C and is AEC-Q200 compliant.
MLZ2012M4R7HT000
MLZ2012M150WTD25
MLZ2012M150WTD25 by TDK is a 15uH fixed inductor with 0.95ohm DC resistance, suitable for general purpose applications. It features dual-ended terminals, ferrite core material, and operates b/w -55°C to 125°C. Ideal for surface mount designs requiring compact rectangular package size (0805) and rated at 0.25A max current.
MLZ2012M100WTD25
The TDK MLZ2012M100WTD25 is a 0805 fixed inductor with 10uH nominal inductance, 0.47 ohm DC resistance, and 0.35A max rated current. Ideal for general purpose applications, it features dual-ended terminals and ferrite core material, suitable for surface mount PCB designs requiring compact rectangular package sizes.
MLZ2012N101LT000
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; No. of Functions: 1;
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Terminal Finish: TIN NICKEL COPPER;
MLZ2012N150LT000
MLZ2012N150LT000 by TDK is a shielded, surface mount fixed inductor with 15uH nominal inductance and 0.47ohm DC resistance. It operates b/w -55 to 125 °C and has a max rated current of 0.35A. Ideal for general purpose applications requiring compact rectangular package design.
MLZ2012M1R0HT000
MLZ2012M1R0HT000 by TDK is a shielded, surface mount fixed inductor with 1uH nominal inductance and 0.8A max rated current. Ideal for general purpose applications, it operates b/w -55°C to 125°C and features a ferrite core material.
MLZ2012M150WT
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLZ2012N100LT
MLZ2012N6R8LTD25
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE;
MLZ2012M470WT000
MLZ2012M470WT000 by TDK is an 0805 SMT fixed inductor with 47uH nominal inductance, 3.7ohm DC resistance, and 0.17A max rated current. Ideal for general purpose applications, this shielded inductor operates b/w -55 to 125 °C and features a ferrite core material.
MLZ2012N4R7LT000
TDK's MLZ2012N4R7LT000 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 4.7 uH and can handle a max rated current of 0.6 A. This general purpose inductor is suitable for various applications requiring high temperature resistance and low DC resistance.
MLZ2012N150LTD25
MLZ2012M100WT
MLZ2012N1R0LT000
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Package Length: 2 mm;
MLZ2012M1R5HTD25
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Terminal Placement: DUAL ENDED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved